|
|
|
 |
|
|
|
Canada’s aerospace industry is robust and dynamic, with a long history of innovation and success throughout the world. Home to leading aviation and space companies, Canada is a global market leader in producing regional aircraft, avionics, business jets, commercial helicopters, aircraft engines, flight simulation, landing gear, and space systems and Maintenance Repair and Overhaul Expertise. |
|
|
 Products |
| |
 | 1201 Crash Test Accelerometer
The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g. |  | 1201F Crash Test Accelerometer
The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g. |  | 3700 Shock Accelerometer
The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. Available in ranges from ±50g to ±6000g. |  | 3801A Accelerometer
The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. Available in ranges from ±2g to ±2000g. |  | 4000A Accelerometer
Economical, signal conditioned with integral temperature compensation. Rugged aluminum housing ideal for transportation and instrumentation testing. Available in ±2g to ±200g. |  | 4001A Accelerometer
The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates an integral 5-pin connector at the end of the cable assembly. Available in ranges from ±2g to ±200g. |  | 40A Accelerometer
A small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable output. Available ranges ±100g to ±2000g |  | 4201 Accelerometer
A very high performance accelerometer designed for Formula One, Indy Racing League, NASCAR and other racing applications. |  | 4600 Accelerometer
The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4602 Accelerometer
The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4604 Accelerometer
The Model 4604 is a rugged, low-profile MEMS accelerometer designed for both static and dynamic applications. The device offers outstanding thermal performance and features a robust strain relief and cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4605 Accelerometer
The Model 4605 is designed for both static and dynamic measurements in critical and demanding applications. The device offers outstanding thermal performance and features a detachable cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4610 Accelerometer
The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4620 Accelerometer
The Model 4620 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device incorporates a Teflon insulated cable with a rugged strain relief designed for demanding applications. Provides an amplified output. Available in ranges from ±2 to ±250g. |  | 4623 Accelerometer
The Model 4623 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device features EMI/EMC protection circuitry and a rugged strain relief for harsh installations. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4630 Triaxial Accelerometer
Low noise; static & dynamic response. The 3 circuit assemblies are hermetically sealed. Operates on common or separate power supplies. Ranges from ±2 to ±500g. |  | 4801A Accelerometer
The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output, enhanced temperature compensation, and shock protection up to 10,000g. Available in ranges from ±2 to ±500g. |  | 4803A Triaxial Accelerometer
The Model 4803A is a low noise triaxial accelerometer in a rugged, welded stainless steel package. The silicon MEMS accelerometer incorporates integral temperature compensation and provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4807A Accelerometer
The Model 4807A is an ultra low noise DC response accelerometer offering micro-g resolution. The accelerometer is sealed in a welded stainless steel package and offers an amplified signal conditioned output in ranges from ±2 to ±200g. |  | 4810A Accelerometer
The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package. It features a detachable cable, temperature compensation, and a signal conditioned output. Available in ranges from ±2 to ±500g. |  | 52F Accelerometer
This unit features a full bridge output with an operating temperature range from -40 to +90°C. A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 7kHz. |  | 52M32 Accelerometer
This unit features a full bridge output with an operating temperature range from -40 to +90°C. A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 6kHz. |  | 58 Accelerometer
The Model 58 Accelerometer is a MEMS DC response accelerometer designed for auto safety crash testing. The accelerometer is packaged in a rugged housing with a shielded low-noise cable specifically designed for crush zone testing. Available in ranges ±50g to ±2000g |  | 606M1 Accelerometer
A MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data. |  | 606M2 Accelerometer
The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity. |  | 62 Crash Test Accelerometer
The Model 62 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. Available in ranges from ±50g to ±6000g. |  | 7100A IEPE Accelerometer
The Model 7100A is a high performance IEPE accelerometer with an operating temperature range of -55°C to +150°C. It is hermetically sealed and features the popular through hole mount installation. Available in ranges from ±50 to ±500g. |  | 7101A IEPE Accelerometer
The Model 7101A is a miniature, high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz. |  | 7102A Accelerometer
The Model 7102A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a welded hermetic Titanium construction with an M3 connector. |  | 7104A IEPE Accelerometer
The Model 7104A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a side mount 10-32 coaxial connector. |  | 7105A IEPE Accelerometer
The Model 7105A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a top mount 10-32 coaxial connector. |  | 7108A IEPE Accelerometer
The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a coaxial 10-32 top connector. |  | 7109A Accelerometer
The Model 7109A is a miniature stud mount IEPE shock accelerometer available in ±5,000g to ±20,000g ranges. The accelerometer features a welded hermetic stainless steel construction with an integral cable for electrical connection. |  | 7114A IEPE Accelerometer
The Model 7114A is a high performance IEPE accelerometer available in ±5g to ±50g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a side mount connector. |  | 7120A IEPE Accelerometer
A high performance IEPE accelerometer designed for modal applications. The accelerometer is available in ±50g to ±500g dynamic ranges and offers a flat frequency response to >6kHz. Features a hermetic welded Titanium construction with a side mount connector. |  | 7131A Triaxial IEPE Accelerometer
The Model 7131A is a miniature triaxial IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a hermetically sealed Titanium construction with a 4-pin Microtech connector interface. |  | 7132A Triaxial IEPE Accelerometer
The Model 7132A is a miniature triaxial IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. |  | 7134A Triaxial Accelerometer
The 7134A is a true case isolated triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. Features three internally shielded accelerometer assemblies for superior noise isolation. The assemblies are installed in a hermetically sealed light weight Titanium housing with a 4-pin Microtech connector interface. |  | 7204A IEPE Accelerometer
A case isolated high temperature IEPE accelerometer with internal shielding. Has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. Available in ±50 to ±500g ranges. |  | 7500A Charge Accelerometer
The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has charge output of 20pC/g, and provides stable thermal response up to +260°C. Available in ±250g up to ±2000g dynamic range. |  | 7501A Charge Accelerometer
The Model 7501A is a miniature piezoelectric charge mode accelerometer with an operating temperature range to +260°C. It is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >15kHz with 5.6pC/g nominal output. Available in ±2000g dynamic range. |  | 7502A Charge Accelerometer
The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has a charge output of 1.6pC/g, and provides stable thermal response up to +200°C. Available in ±5000g dynamic range. |  | 7504A Charge Accelerometer
A stud mounted piezoelectric charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz. |  | 7505A Charge Accelerometer
A stud mounted piezoelectric charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz. |  | 7508A Charge Accelerometer
The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. With a nominal charge output of 5.6pC/g the model 7508A offers a high signal to noise ratio in a miniature package. Available in ±2000g dynamic range. |  | 7514A Charge Accelerometer
The Model 7514A is a stud mounted piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g. Available in dynamic ranges of ±500g to ±2000g. |  | 8011-01 & 8012-01 IEPE Accelerometer
The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C. |  | 8021-01 & 8022-01 IEPE Accelerometer
The Model 8021-01 & 8022-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 12kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C. |  | 8032 IEPE Accelerometer
The Model 8032-01 is an internally shielded rugged IEPE accelerometer designed for harsh environments. It is available in ±50 to ±500g dynamic ranges and has a flat bandwidth up to greater than 12kHz. Features an integral molded strain relief and is designed to operating in temperature ranges from -55°C to +100°C. |  | 8042-01 Accelerometer
The Model 8042-01 is a submersible IEPE accelerometer designed for harsh environments. The accelerometer is available in ±10g, ±80g & ±500g dynamic ranges and feature a welded Titanium housing. |  | 8102 Triaxial Piezoelectric Accelerometer
The Model 8102 is a low cost, plug & play triaxial accelerometer. It incorporates full power and signal conditioning with a maximum current consumption of only 22 micro-amps. Available from ±25g to ±6000g ranges and provides a flat frequency response up to 6kHz. |  | DXA-100 & DXA-200 Series Accelerometer
The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS485 and RS422 outputs. |  | EGAS Accelerometer
The Model EGAS is a miniature, uniaxial accelerometer featuring ranges from ± 5 g’s through 2500 g's. |  | EGAS3 Triaxial Accelerometer
The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g. |  | EGAXT Accelerometer
The Model EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGAXT3 Triaxial Accelerometer
The Model EGAXT3 miniature triaxial accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGCS-L High Amplitude Shock Accelerometer
The Model EGHS-L is a high amplitude piezoresistive shock accelerometer designed for transient shock testing. Available in ±30,000g and ±60,000g ranges, it is packaged in a rugged welded stainless steel housing. |  | EGPE-1A IEPE Accelerometer
The model EGPE-1A is a high performance IEPE type accelerometer with an operating temperature range up to +150°C. It is available in ±10g to ±500g ranges and provides a flat frequency response up to 15kHz. |  | EGPE-2A Charge Accelerometer
The model EGPE-2A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It provides stable thermal response up to +260°C, and features the popular through hole mount installation. Available in ±50g to ±2000g dynamic range. |  | LCA-100 Accelerometer
The Jewell LCA Series Accelerometer is a general-purpose ±0.5G to ±5G device designed for industrial, commercial and aerospace sensing requirements. |  | LCF-200 Accelerometer
The Jewell LCF Series Accelerometer is a ±0.5G to ±5G device designed for
applications where high levels of shock and vibration are present. LCF units are
characterized by excellent turn on repeatability and very low hysteresis. |  | LCM-100 Accelerometer
The Jewell LCM accelerometer is a general-purpose acceleration sensor for industrial, commercial and aerospace applications. |  | LSB Accelerometer
The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G device designed forindustrial, commercial and aerospace sensing requirements. |  | LSM Accelerometer
The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube. |  | LSXH Accelerometer
The JEWELL LSXH is the most rugged of all of our accelerometers. The JEWELL LSXH is a compact high-performance, high-accuracy accelerometer with a range of 0.017G to 10G full scale. |  | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. |
 | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. |  | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. |  | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. |  | 1800 Platinum Standard™ Calibration Load Cell
The 1800 Platinum Standard is the ultimate in calibration grade load cells and has a 2% lower limit per ASTM E74 and an integral stud. |  | BN100A Bridge Calibration Unit
The BN100A bridge calibration unit is a highly precise calibrator to calibrate measuring equipment and measurement chains which function with a carrier frequency of 225Hz. The BN100A bridge calibration unit is inserted in the measuring system to be calibrated in place of the transducer (full bridge), or is connected directly with the measuring instrument, and simulates with the aid of switchable inductive dividers the output signals of the transducer in a range of ±100mV/V. |  | DMP40 Digital Precision Measuring Amplifier
The DMP40 is especially suitable for high precision comparative measurements of mechanical quantities such as force, mass, torque and pressure. One example of this is the measurements performed by the National Metrological Organizations like the PTB (German Metrology Institute). In this field of application the preceding model (DMP39) has already been employed as a reference instrument throughout the world. |  | Gold Standard E4 Machine Calibration System
It is necessary to recalibrate materials test machines and presses because of, possible undetected damage, normal wear and tear and to make sure the system is performing to its design capabilities. The Gold Standard E4 machine calibration system is a complete PC based system for the calibration of materials test machines. The system is user friendly and calibrations can be conducted with minimal training. |  | Gold Standard Load Calibration System
PC-based system for calibration of load cells and torque transducers. Normally used with hydraulic load frame. Separate software available for calibration of load cells in a deadweight system. |  | Gold Standard™ Load Frames
Available in capacities 3K, 10K, and 55K. |  | HRBSC High Resolution Signal Conditioning Board
The model HRBSC is a single-channel high resolution signal conditioning board. This board offers many additional features over the SCB1 for users requiring the highest levels of accuracy and precision. |  | K148 Calibration Unit for full bridge amplifiers
The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with measuring ranges from ±0.2 mV/V up to ±100 mV/V to be calibrated. |  | K3607 Calibration Unit
The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement chain. For this purpose the calibration instrument is equipped with a high-precision resistance network in star configuration, designed to simulate 350-ohm strain gauge full-bridge transducers. |  | K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy. |  | Precision mV/V Load Cell Simulator
Most accurate load cell simulator, special low thermal emf construction. |  | SCB1 Signal Conditioning Board
The SCB1 signal conditioning board comes in a one or two-channel configuration. The single-channel unit is used with a dead weight system and/or for test machine verification, while the two-channel unit is used for calibrations where a reference (Standard) load cell is being used. One channel is connected to the reference standard and one channel is connected to the cell being calibrated. |
 | 766 Permanent
19" rack-mount unit providing a modular acquisition/analysis system for condition monitoring of rotating plant. |  | 766 Portable
Designed for use by vibration analysts in troubleshooting, balancing and return-to-service/commissioning roles. |  | 767 Portable
Total measurement and analysis capability for monitoring and analyzing vibration in rotating plant. |  | 768
An optimised solution for smaller turbines such as those used in Hydroelectric and Gas Pumping Installations. |  | Beran Condition Monitoring Systems
Comprehensive functionality, flexible data handling, and efficient communications. |
 | 161 Signal Conditioner
A 4-channel signal conditioning amplifier designed to be used with piezoelectric accelerometers (IEPE or Charge) and most other piezoelectric based transducers. The signal conditioner features broad bandwidth to 100kHz and 10Vpeak linear output. |  | 9320 Hand Held Digital Indicator
The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant. |  | 9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector. |  | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9840 Intelligent Digital Indicator
The 9840 is suitable for use in calibration labs, field service, or anywhere high accuracy is important. Features include a bipolar 6-digit 2-line display, remote sense, low noise, 22-bit resolution, USB port with RS232 communication, mV/V calibration and the ability to store up to 25 different sensors. 6-point linearization, unit conversion, front-panel tare. Self calibration via TEDS Plug & Play ready IEEE1451.4 compliance. |  | 9850 Multi-Channel Digital Indicator
The model 9850's modular design allows the use of 7 different types of channel cards in 2 available channels. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging. |  | 9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality. |  | Digital CVT Vacuum Controller
The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | Digital VT Vacuum Indicator
The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | DSI-1000 Digital Slope Indicator
A microprocessor based panel meter designed to take the output from Jewell's gravity referenced inclinometers and display it at an angle. The compact unit provides the ±15VDC sensor excitation with dual channel inputs condition the inclinometer output and displays the angle down to 0.001 degrees. |  | DSI-2000 Digital Slope Indicator
A microcontroller based touch screen display solution for pairing with most of Jewell Instruments Inclinometer offerings. The DSI-2000 performs real time sampling and geometric conversion from you +/- 5VDC output of the inclinometer or serves are a limited range high precision voltage tester. |  | MM40 Digital Indicator
Features large 4 ½ digit LED display with full range from 19999 to 99999. The easy to use pushbutton zero adjustment and range configuration minimizes end-user setup time. Operating from 85 to 250VAC 50/60 Hz, with a rugged NEMA 4X/IP165, IP20 touch safe case perfect for laboratory and industrial environments. |  | MVD2510 Panel Meter Amplifier
Control panel measuring amplifier for process control and test bencher. |  | MVD2555 Panel Meter Amplifier
Carrier frequency amplifier for panel mounting. |  | Scout55 4.8kHz Carrier-Frequency Amplifier
The SCOUT55 measuring amplifier is suitable for recording and processing measured values from passive transducers. Transducers that can be connected are: strain-gauge half and full bridges, inductive half and full bridges, LVDTs, piezoresistive transducers, potentiometers. |
 | HM1500LF Humidity Sensor
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply. |  | HM1520 Humidity Sensor
HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply. |  | HTM2500 Humidity and Temperature Sensor
HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc. |  | Humidity Sensors (overview)
Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve control and output. |
 | AccuProfile 620 Laser Profile Sensor
The AccuProfile 620 Laser Profile Sensor produces a 2D profile of surfaces and objects with great precision. The line sensor is used to calculate dimensions such as width, thickness, height, gap, diameter and angles. |  | AccuProfile 820 2D Laser Scanner
The AccuProfile 820 2D laser scanners are high-accuracy sensors for industrial surface dimensioning and measurement applications. The scanner quickly and accurately generates low-noise 2D or 3D profile scans of objects, surfaces or scenes. The sensor automatically adjusts laser power and detector exposure to compensate for varying surface conditions. |  | AccuProfile 920 Laser Scanner
The AccuProfile 920 Laser Scanner is a turn-key scanning appliance for industrial and research applications. With a revolutionary aiming system the scanner can rapidly scan full 3D scenes or be configured to raster regions of interest to reveal surface detail with dimensions. |  | AccuRange Line Scanner
The AccuRange Line Scanner is precise spinning mirror assembly that when coupled with Acuity's laser rangefinder, creates a laser scanner. The laser scanner sweeps a laser spot through a 360° rotation for the measuring of profiles and scenes. The AccuRange line scanner is often further integrated to create 3D laser scanners. |  | AR1000 Laser Distance Sensor
The Acuity laser distance sensor model AR1000 can measure 30 meters with an accuracy of 3 mm. Using a reflective target board, the sensor will measure distances up to 150 meter. Ideal for measuring fill levels and material height monitoring, the AR1000 sensor can hold up to very tough environments. |  | AR200 Laser Measurement Sensor
The AR200 laser measurement sensor is Acuity's most compact product to employ a CMOS detector. Four metric models satisfy precision measuring requirements from 6 mm to 100 mm with up to 12 micron accuracy. |  | AR2500 Laser Sensor
AR2500 laser sensors are Acuity's ultra-compact rangefindermodels. This eye-safe rangefinder can measure to 30 KHz to natural targets 30 meters away or to reflectors 260 meters away. The AR2500 is also available in module format to system integrators and high-volume OEM customers. |  | AR500 Laser Position Sensor
The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes. |  | AR700 Laser Displacement Sensor
The AR700 laser displacement sensor is Acuity's newest, high-resolution sensor. Models vary in measuring range and can achieve resolutions better than 0.2 micron. Increased sampling speeds to 9.4 Khz satisfy the requirements of the road profiling industry. |  | CCS Prima Confocal Sensor
Acuity's most accurate and most resolute distance sensor employs a unique measuring principle, confocal chromatic sensing. Unlike our time-of-flight and triangulation sensors which use lasers, the CCS Prima Confocal sensors use a white light source to accurately measure the distance to surfaces. Some models are accurate to within 20 nanometers. Additionally, this technology permits measurement and profile of transparent materials like glass, lenses, liquids, etc. |
 | 101 DC Signal Conditioner
A 3-Channel DC Signal Conditioner Amplifier designed to be used with bridge type or differential output accelerometers and pressure transducers. With variable gain adjustment, shunt calibration capability, multiple excitation level settings, and a variety of optional filter modules. |  | 140 Inline Amplifier
The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function. |  | BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output. |  | CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs. |  | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |  | DF30CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. |  | DF30DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. |  | DF30DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. |  | DF31CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | digiCLIP Digital Amplifier (overview)
digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available. |  | DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration. |  | IAM Amplifier
The compact IAM In-line Amplifiers provide a fixed 1, 10, 20, 50, 100, 200, 500 or 1000 100kHz – 3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection. |  | IAMR Amplifier
The compact IAMR In-line Amplifiers provide a fixed 10, 20, 50, 100, 200 or 500 Gain with 700kHz/G-3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection. |  | INF-USB Universal Serial Bus Output Module
The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. Included graphing and logging software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for later research. |  | MP01 Multi Channel PME Amplifier
Multi-channel amplifier for applications in process supervision and industrial test-rig measurement technology. |  | MP55 Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers. |  | MP55DP Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers with DP interface. |  | MP60 Single Channel PME Amplifier
Single channel module for incremental transducers. |  | MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface. |  | PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories. |  | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. |
 | HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP |  | TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle. |  | TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically. |
 | AccuStar Electronic Clinometer
The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. Designed for easy integration, with a choice of analog, ratiometric, digital or serial models, the clinometer produces an output signal corresponding to direction and magnitude of angular displacement. Features a linear range of ±45°. |  | D-series Dual Axis Inclinometer
The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals. |  | DOG1 MEMS-Series Inclinometer
The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including temperature compensation. |  | DOG2 MEMS-Series Dual Axis Inclinometer
A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations). |  | DXI-100 & DXI-200 Series Inclinometer
The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485 outputs. |  | LCF-2000 Inclinometer
The JEWELL LCF 2000 Series Inclinometer is a two axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | LCF-2330 Inclinometer
The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure suspension, servo technology in a small and convenient package for applications requiring a compact dual axis solution. |  | LCF-3000 Inclinometer
The JEWELL LCF 3000 Series Inclinometer is a three axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | P-Series Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. |
|
|
|
|
|
|
|