|
|
|
 |
|
|
|
The food and pharmaceutical industries develop, produce, and market either food or drugs (licensed for use as medications). System controls and automation and implemented to improve product quality control and manufacturing throughput. |
|
|
 Products |
| |
 | LCM-100 Accelerometer
The Jewell LCM accelerometer is a general-purpose acceleration sensor for industrial, commercial and aerospace applications. |  | LSM Accelerometer
The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube. |  | LSXH Accelerometer
The JEWELL LSXH is the most rugged of all of our accelerometers. The JEWELL LSXH is a compact high-performance, high-accuracy accelerometer with a range of 0.017G to 10G full scale. |
 | BA100-1 Conveyor Belt Alignment Switch
Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC. |  | BA100-1X Conveyor Belt Alignment Switch
Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure. |  | BA100-2 Conveyor Belt Alignment Switch
Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC. |  | BA100-2X Conveyor Belt Alignment Switch
Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing. |  | Rub Block Door Assemblies
Rub Block Door Assemblies are designed for quick and easy inspection of belts and replacement of worn rub blocks saving time and promoting regular maintenance inspections. |
 | Accu-Dial Control Potentiometer
The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP). |  | Accu-Tach Control Potentiometer
The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP). |
 | 9320 Hand Held Digital Indicator
The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant. |  | 9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector. |  | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality. |  | AC-D-4M Large Display Event Counter
The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures. |  | CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application. |  | CVT Analog Vacuum Controller
CVT Vacuum Controllers are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers operate in the same standard ranges as the VT meters with the addition of single or double user selectable control limits. Includes durable 10A SPDT control points. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |  | Digital CVT Vacuum Controller
The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | Digital VT Vacuum Indicator
The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges. |  | HPM 4-6 Portable Vacuum Indicator
The Model HPM 4/6 is a compact, hand-held, digital display, battery operated control unit. When combined with the Teledyne Hastings Instruments (THI) rugged thermopile sensors it becomes a vacuum instrument designed for portability and ease of use in applications where AC power is not readily available. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | Micro P Panel Meter
The state of the art in programmable digital panel meters, counters, timers, and serially driven remote displays. |  | Micro Series Counters - Timers Panel Meters
The Micro-C, Mighty-1C and Mighty-5C models are offered in both a standard and extended version. The extended version offers advanced features such as simultaneous measurements of rate and total, linearizing of non-linear signal inputs, mathematical functions such as A channel plus B channel (A + B), stopwatch and phase angle measurements. The basic counter version may be used to measure rate, square root of rate (flowmeters), frequency, total, period and quadrature. |  | Mighty-1 Large Digit Meters
Micro "Mighty-1" Series of large-digit displays feature 1" (25.4 mm) high 7-segment digits and a sealed enclosure designed to withstand harsh industrial environments. The 1" digits are readable at up to 40 feet (12 m), which is 79% further than maximum reading distance of 22 feet (7 m) associated with the 0.56" (14.2 mm) digits found in most 1/8 size digital panel meters and counters. |  | MVD2510 Panel Meter Amplifier
Control panel measuring amplifier for process control and test bencher. |  | MVD2555 Panel Meter Amplifier
Carrier frequency amplifier for panel mounting. |  | THCD-100 Single Channel Power Supply
The THCD-100 is a fully integrated 5-digit display that features many user-convenient features including digital communications, alarm outputs with relays, configurable display units, multiple transducer supplies and more. |  | THPS-100 Single Channel PowerPod
The THPS-100 is a self-contained power supply and display designed for gas mass flow-meters. It features an automatically generated set point (0-5V or 0-10V) and RS232 communication. |  | THPS-400 Four Channel PowerPod
The THPS-400 is a power supply and indicator capable of displaying four channels simultaneously. It has an integrated totalizer, filter function, and Serial communication. Has the ability to set ratio control for gas blending applications. |  | THPS-760 Plus Digital Vacuum Controller
The THPS 760 Plus Vacuum Controller is an exceptionally stable, accurate and repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 41/2 digit meter indicates in 0.1 Torr units from 0.1 to 1000.0 Torr. Designed for use with the HPM-760S vacuum sensor. |  | VT Analog Vacuum Indicator
VT-Series Vacuum Gauges are available in three standard ranges: 0-100 mTorr, 0-1000 mTorr, and 0-20 Torr. A self-contained gauge circuit is attached to the rear of the direct reading meter. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |
 | Electro-Sentry 1 Single Leg System
The Electro-Sentry 1 is a single leg, stand-alone system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime. |  | Electro-Sentry Multi-Leg System
The Electro-Sentry is a multi-leg system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime. |
 | HTM2500 Humidity and Temperature Sensor
HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc. |
 | VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load. |  | VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance. |  | VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |  | VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |
 | AR500 Laser Position Sensor
The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes. |
 | BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output. |  | CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs. |  | DF30CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. |  | DF30DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. |  | DF30DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. |  | DF31CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | digiCLIP Digital Amplifier (overview)
digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available. |  | PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories. |  | PMX Modular Amplifier System
Precise acquisition of measurement signals at 19,200 samples per second. With 16 measuring channels and 32 calculating channels per module, and scaleable with additional modules. Uses real-time communication via Industrial Ethernet and a modern browser based user-software. |  | SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors. |  | UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation. |
 | HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP |  | TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically. |
 | LCI Inclinometer
The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis. |  | LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies. |  | LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series. |  | P-Series Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. |  | V-Series Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°. |
|
|
|
|
|
|
|