|
|
|
 |
|
|
| Institutional (Education) |
Many educational and institutional research facilities are involved with “Long Term Research”, which can be characterized by the statement, "creative work undertaken on a systematic basis in order to increase the stock of knowledge, including knowledge of man, culture and society, and the use of this stock of knowledge to devise new applications”. Sensors play an important role in testing, data gather and sensing event of particular interest in the research process. |
|
|
 Products |
| |
 | 201 Accelerometer
The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g. |  | 4630 Triaxial Accelerometer
Low noise; static & dynamic response. The 3 circuit assemblies are hermetically sealed. Operates on common or separate power supplies. Ranges from ±2 to ±500g. |  | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. | | Accelerometers - Board Level / OEM |  |  | ACH-01 Accelerometer
The ACH-01 is a low cost, robust, general purpose accelerometer with outstanding performance characteristics. It is specifically designed for high volume applications that require the permanent installation of an accelerometer. | | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. |
 | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. |  | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. |  | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. |  | Gold Standard™ Load Frames
Available in capacities 3K, 10K, and 55K. |  | K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy. |  | TransCal 445 Portable
The Beran 445 Portable TransCal™ provides a simple-to-use, self-contained, battery powered calibrator. It consists of the drive generator, power amplifier, built-in shaker and reference accelerometer, all fitted into a rugged carrying case. |  | TransCal 455 Integrated Calibration System
The Beran 455 Integrated
TransCal™ provides, in one box, all of the measuring devices required to calibrate the majority of vibration transducers. The unit includes a power amplifier to provide drive to the user's shaker and two channels of matched signal conditioning amplifiers, one for the reference transducer and the other for the test transducer. |  | TransCal 475 Laboratory Calibration System
The Beran 475 Laboratory
TransCal™ is a dedicated, high precision instrument for the fully automatic calibration of vibration transducers. The sine correlation measurement technique is used in the Beran 475 to ensure that accurate, repeatable measurements are provided over a wide frequency range and with changing measurement environments. |
| Data Acquisition - High Speed - Dimension | |  | Dimension4i High Speed DAQ & Transient Recorder
Can be used both as a data recorder and a transient recorder. Combines all essential instruments in one device. Easy to understand and operate. |  | Accelerometer Digitizer
The Accelerometer Digitizer is a very versatile and high performing amplifier, ideal for powering ICP transducers, or accommodating AC and DC signals. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, analog anti-aliasing filters. |  | Data Recorder Dimension4i (specifications)
Dimension4i can be used both as a data recorder and as a transient recorder – meeting the highest of demands. Dimension4i therefore combines all essential instruments in one device. Because Dimension4i was developed in cooperation with users as a professional tool for daily use, operation of the Dimension4i is intuitive and oriented towards the requirements of use: easy to understand, easy to operate. Routine tasks are quickly completed with Dimension4i so that you can concentrate fully on your tasks as a professional. |  | Isolated Digitizer
The Dimension Isolated Digitizer was designed for the extreme testing conditions and accuracy requirements of high voltage measurement applications. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, isolation circuitry and analog anti-aliasing filters. | | Data Acquisition - High Speed - Genesis | |  | GEN7t & GEN16t High Speed - High Channel Count DAQ
With GEN7t/16t, you can configure up to 1,080 synchronized channels according to your requirements. Your system grows from the first channel onwards exactly as your project changes. Stay on top, rapidly, reliably, flexibly and always with perfect precision. Up to 8 GEN "slaves" can be connected to a GEN7t/16t master, each of these 9 devices can contain between 4 and 120 channels, and all 1,080 channels can measure in synchronization with each other. |  | GEN7t & GEN16t - mainframes & option
The GEN series Data Acquisition System is one of the most sophisticated and powerful systems in the marketplace and demonstrates the quality HBM has to offer. |  | Basic 1M Digitizer
8 Channel, 1MS/s, Basic Card, 256MB RAM (16 MS/ch) |  | Basic 1M ISO Digitizer
8 Channel, 1MS/s, Basic Card, 512MB RAM (32 MS/ch) - isolated, unbalanced-diff |  | Basic 1M XT ISO Digitizer
8 Channel, 1MS/s, Basic XT Card, 512MB RAM (32 MS/ch) - isolated, with extended input range |  | Basic 200K Digitizer
8 Channel, 200kS/s, Basic Card, 128MB RAM (8 MS/ch) |  | Binary Marker CT
The Binary Marker CT board CT is a dedicated binary input option for GEN DAQ products. It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of counter/timer functionality. Each channel can have its own function. |  | Binary Marker HV ISO
The Binary Marker HV board is a dedicated input option for GEN DAQ products. It enables to record up to 32 binary input channels (marker channels) as well as 8 digital event signals that are optically isolated with up to 1 MS/s per channel. |  | Bridge 1M ISO Digitizer
4 Channel, 1MS/s Bridge Card, 512MB RAM (64 MS/ch) - isolated |  | Bridge 200K ISO Digitizer
4 Channel, 200kS/s Bridge Card, 128MB RAM (16 MS/ch) - isolated |  | Fast Differential Digitizers
For ultra fast signals, the 25 MS/s and 100 MS/s high speed digitizer boards are equipped with four channels sampling at incredible high speed. With selectable anti-aliasing filtering and 14-bit (100 MS/s) or 15-bit resolution (25 MS/s), these inputs turn the GEN series into an extremely fast transient recorder. |  | GEN2i High Speed - Portable Data Recorder
GEN2i is a revolutionary new portable data recorder, offering incomparably powerful features and an exciting touchscreen user interface. With up to 16 input channels, fully configurable to your needs, it provides both continuous direct-to-disk as well as fast transient recording. |  | Genesis GEN5i Portable High Speed DAQ
The complete, portable test laboratory. Up to 40 channels available simultaneously. With integrated PC, you can measure directly at the event location & analyze the results. |  | Universal 1M ISO Digitizer
4 Channel, 1MS/s Universal Card, 512MB RAM (64 MS/ch) - isolated |  | Universal 200K ISO Digitizer
4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) - isolated | | Data Acquisition - Laboratory Universal Data Acquisition | |  | MGCplus Data Acquisition System (overview)
With more than 100,000 channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. Supports a wide spectrum of transducers, fieldbus connections and standard PC interfaces. It is the choice for almost all industrial, laboratory and R&D measurement applications. Capable to measure force, displacement, pressure, temperature, torque, acceleration, strain, stress, voltage, current, frequency or resistance - at low or high speeds. |  | APxx Connection Boards for MGCplus
Connection boards for single channel or multi-channel amplifiers. Also connection boards for special-function modules. |  | Cpxx Communication Processors for MGCplus
Outstanding performance and use of standard PC interfaces distinguish the communication processors CP22 and CP42 for MGCplus. Both allow the assembly of networks: An important condition if data acquisition systems with more than 1,000 active channels should assembled. |  | ML38 High-precision Single-channel Amplifier Module for MGCplus
The ML38B precision amplifier provides a high resolution of 1,000,000, an accuracy of 0.0025% and an excellent long-term stability. |  | MLxx Amplifier & Communication Modules for MGCplus
Single-channel and multi-channel amplifer modules, and special-function modules for the MGCplus system. |  | CANHEAD Distributed Amplifier System
Simplify your measurement processes with CANHEAD® - and at the same time gain flexibility and efficiency. CANHEAD® is ideal for average to high channel counts. The 10-channel CANHEAD® amplifier modules can be installed in immediate proximity to the measuring points. Inexpensive and reliable standard fieldbus cables connect the CANHEAD® modules to a communication master. |  | CANHEADdirect Communication Module
The CANHEADdirect communication module enables measurement data of up to five CANHEAD® modules to be directly transmitted to a PC via CANbus. At a price that makes the CANHEAD® system the first choice for small and medium-sized applications in experimental structural and stress analysis as well. | | Data Acquisition - Universal Data Acquisition | |  | QuantumX (overview)
QuantumX is a universal data acquisition system. "Universal" means that QuantumX can be used with all types of transducers. Its universal flexibility also means that you can use it to conduct all kinds of test and measurement tasks as well as for verification of results in any type of industrial environment. |  | QuantumX CX27 Ethernet-EtherCAT Gateway
CX27 allows integration of several QuantumX modules for real-time data acquisition of up to 199 signals via EtherCAT. Selected signals can simultaneously be monitored via Ethernet TCP/IP. |  | QuantumX MX1609 16-channel Thermocouple Amplifier
MX1609 is part of the QuantumX family and offers many excellent qualities: Reliable temperature measurement using the proven and widely used type K thermocouple – at the same time opening up fascinating new opportunities for your day-to-day measurement tasks. |  | QuantumX MX410 4-channel High-Dynamic Universal Amplifier
The MX410 provides both sampling rates of up to 96 kHz/channel and a high resolution of 24 bits. Results are highly accurate as required when capturing highly dynamic forces and accelerations. Compatible with strain gage transducers in half and full bridge configuration (DC, 4.89 kHz CF) as well as with inductive half and full bridges and current-fed piezoelectric sensors (IEPE). |  | QuantumX MX440A 4-channel Universal Amplifier
4 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX460 4-channel Frequency Measuring Amplifier
Capture digital rotational speed signals or evaluate pulse width modulation signals (PWM). Or integrate the worldwide leading HBM torque transducers into the QuantumX universal data acquisition system. Features sampling rates of up to 96 kHz/channel and a bandwidth of up to 38 kHz. An ideal choice for applications in motor and drivetrain development. |  | QuantumX MX840A 8-channel Universal Amplifier
8 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX878 Transmitter with 8 analog voltage outputs
The MX878 transmitter enables scaled measurement signals to be monitored in a standardized unit of measurement or transmitted to other systems to allow flexible and efficient data analysis. In addition, signals can be set off against each other using algebraic operations. The module also features functions for peak value analysis. |  | Spider8 Multi-Channel Electronic PC Measurement Unit
Spider8 is a multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer. The Spider8 offers a congenial and economic alternative to systems consisting of a number of components. These are usually accommodated partly in the computer and partly externally and must first be wired and configured to form a measurement system. |
 | 9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector. |  | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | DML300 Single Channel LVDT Panel Indicator
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. DML300 series indicators have a five digit display, transducer excitation supply and many software features including max/min memory and math functions. All models are fitted with two analogue outputs - a high speed analogue output for monitoring fast changes of sensor movement, and a separate, electrically isolated, scaleable analogue output. |  | DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges. |  | Scout55 4.8kHz Carrier-Frequency Amplifier
The SCOUT55 measuring amplifier is suitable for recording and processing measured values from passive transducers. Transducers that can be connected are: strain-gauge half and full bridges, inductive half and full bridges, LVDTs, piezoresistive transducers, potentiometers. |  | THPS-100 Single Channel PowerPod
The THPS-100 is a self-contained power supply and display designed for gas mass flow-meters. It features an automatically generated set point (0-5V or 0-10V) and RS232 communication. |  | THPS-400 Four Channel PowerPod
The THPS-400 is a power supply and indicator capable of displaying four channels simultaneously. It has an integrated totalizer, filter function, and Serial communication. Has the ability to set ratio control for gas blending applications. |
 | JC2000 Multi-Axis Contactless Joystick
The JC2000 is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions. |
| Linear Position Sensors - Hall Effect | |  | SLH100 Hall Effect Contactless Linear Sensor
Designed to provide precision cost effective position sensing using the proven contactless Hall effect principle. The sensing system has two parts; sensor and magnetic activator. | | Linear Position Sensors - Low Cost LCIT | |  | LCIT Linear Inductive Sensor
The LCIT series is based on a patented linear position sensor design that features all of the benefits of current LVDT inductive technology, but at a significantly lower cost. The proprietary coil and electronics design of the LCIT has allowed Measurement Specialties to dramatically increase the frequency response without increasing noise, and lower the mass of the core. | | Linear Position Sensors - LVDT | |  | DC-EC AccuSens LVDT
The DC–EC AccuSens™ Series incorporates a unique monolithic chip combined with a computer-designed AC LVDT to achieve premium performance. The ratiometric design of the monolithic circuitry compensates for power supply deviations for continuously stable operation. Unaffected by input variations, the transducer provides highly accurate, repeatable measurement. |  | DC-SE LVDT
The DC-SE series has been designed to meet today’s requirements for operation from a single-ended power supply. The output is also single-ended over the full range displacement of the LVDT making the unit compatible with unipolar inputs on analog-to-digital converters and programmable logic controllers, etc. |  | E LVDT
The E Series of LVDTs is economical and satisfies numerous applications where LVDT performance and reliability are desired, but where budgets are limited. Linearity is 0.5% of full-range for all units except the E2000. The E series is particularly suitable for moderate operating temperatures. |  | HCD Hermetically Sealed LVDT
The HCD series LVDTs are impervious to dirt, water, steam spray and most corrosives. Tungsten inert gas (TIG) welding provides hermetic sealing that is free from oxidation-producing faults that may cause leakage. They have been qualified at pressures up to 1000 psi (70 bars) and are suitable for numerous high-pressure applications. |  | HR LVDT
The HR Series of LVDTs is highly reliability and is suitable for most general applications. The HR Series features a large core-to-bore clearance, high output voltage over a broad range of excitation frequencies, and a magnetic stainless steel case for electromagnetic and electrostatic shielding. |  | LBB Ultra Precision Gauge Heads
The Linear Ball Bearing (LBB) Series of dimensional gaging probes is engineered for highly precise and repeatable measurements in quality control and metrology applications. LBB within the gaging probe minimize radial play and friction for ultra-precise measurement. |  | M-12 LVDT
The new M-12 series coil design has been optimized to provide the best possible temperature coefficient of sensitivity, while maintaining suitability for operation with extended cable lengths. A seamless 400 series stainless steel case provides magnetic shielding for the noisiest electrical environments. Available ranges are from ± 5 mm to ± 150 mm. |  | MHR Miniature LVDT
The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation assembly. High sensitivity results from close electrical coupling between coil and core. A magnetic stainless steel housing provides electromagnetic and electrostatic shielding. |  | PCA-116 Economy Gauge Head
Our PCA-116 family of gage heads was developed for less demanding applications where a balance between cost and performance is paramount. PCA-116 gage heads incorporate a standardized LVDT with repeatability better than 0.0001" (0.0025 mm) and linearity within 0.5% of full range output. The probe shaft is externally sprung and is carried on low friction nylon sleeve bearings. |  | PCA-375 Gauge Head
The PCA-375 Series gage head is based on the MHR series of LVDTs. The modified MHR has an extended case and spring-loaded plunger. The design goals were simplicity and high reliability with low cost. | | Linear Position Sensors - Potentiometers | |  | HLP190 Spring Loaded Linear Potentiometer
The HLP190 linear potentiometers has a body diameter of only 19mm with stroke lengths from 25mm to 150mm, and a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position. |  | SLS095 Linear Potentiometer
The SLS095 comes in an extremely compact, lightweight package in stroke lengths from 10 to 100mm. The miniature size of this new sensor makes it ideal for applications in robotics, animatronics, medical equipment and motorsport data acquisition. |  | SLS130 Linear Potentiometer
The SLS130 comes in an extremely compact, lightweight package in stroke lengths from 25 to 200mm. It is ideally suited to high volume OEM manufacturers, where high performance and reliability has paramount importance. |  | SLS190 Linear Potentiometer
The SLS190 is available in stroke lengths from 25 to 350mm. Using the proven benefits of Hybrid Track Technology, the SLS190 is ideally suited to high volume OEM manufacturers. |  | SLS220 Spring Loaded Linear Potentiometer
The SLS220 is available in stroke lengths of 10 and 20mm, with a spring loaded operating shaft. This unit has a mounting flange to allow easy installation. |  | SLS320 Linear Potentiometer
The SLS320 is available in stroke lengths from 250 to 1600mm in a compact, with a lightweight, easy to use design. This unit is ideally suited to high volume OEM manufacturers. | | Linear Position Sensors - String (Draw Wire) Potentiometers | |  | DLS Draw Wire Linear Sensor
The DLS series of draw-wire linear position sensors are a cost effective way to measure linear displacements up to 5000mm in the most demanding industrial environments. |  | P-series Position Transducer
AMETEK RayelcoTM Position Transducers offer precise monitoring of a traveling element from 0-2" through 0-2000". Accuracy is maintained on both extension and retraction, and the potentiometer can be excited with either AC or DC voltage up to 25 volts. Twenty seven (27) available models cover ranges of 0-2" through 0-2000". |
| Load Cells / Force Transducers - Beam Type | |  | MB Miniature Beam Load Cell
The MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 5 lbf. to 250 lbf. |  | MBI Fatigue Rated Mini Beam Overload Protected Load Cell
Similar to MBP mini beam but with better resistance to off center loads. Available in capacities from 2 lbf. to 10 lbf. |  | MBP Miniature Beam Overload Protected Load Cell
The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10 lbf. |  | SSB Sealed Beam Load Cell
The SSB is a sealed version of MB mini beam. Available in capacities from 50 lbf. to 1K lbf. | | Load Cells / Force Transducers - Calibration Grade Low Profile Load Cells | | | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. | | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. | | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. | | Load Cells / Force Transducers - Column / Rod End | |  | 2200 Calibration Column Load Cell
Many customers perform 100 and 200K E4 calibrations of material test machines in the field. Interface has developed the relatively lightweight portable 2200 series column load cells to use for field testing applications. These are very accurate column cells and come with handles to facilitate transportation from the vehicle to the job site. They also come standard with 16 gages as well as E74 calibration. | | Load Cells / Force Transducers - Load Buttons | |  | ELFF Load Cell
The ELFF is a compression or tension & compression load cell typically used in surface mount assembly system force feedback, robotics end effectors, weighing, dental and biomechanical parameter measurements, satellite and aerospace force feedback, and ultra low deflection applications. Available in capacities from 10 lbf. to 100 lbf. |  | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. |  | LBM Compression Load Button
The LBM is a compression only load button designed for relatively small spaces. Available in capacities from 25 lbf. to 50K lbf. | | Load Cells / Force Transducers - Low Capacity | |  | ULC Ultra Low Capacity Load Cell
The ULC is the world's most accurate ultra low capacity load cell measuring loads from 50 grams to 500 grams. | | Load Cells / Force Transducers - Low Profile Load Cells | |  | 1100 Ultra Precision Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities from 300 lbf. to 200K lbf. |  | 1101 Ultra Precision Compression-Only Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities of 1K lbf. to 50K lbf. |  | 1200 Standard 3-Wire Amplified Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. With the electronics built into the load cell, there is no need for a separate signal conditioner. Available in capacities of 300 lbf. to 100K lbf. |  | 1200 Standard Load Cell
Higher output than most competitive load cells. For static, general purpose applications requiring a load cell compensated for eccentric loads. Comes in capacities of 300 lbf. to 100K lbf. |  | 1201 Standard Compression-Only Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. Available in capacities of 1K lbf. to 400K lbf. |  | 1500 Standard Low Capacity Load Cell
The 1500 is a fatigued rated Low profile load cell is designed for low capacity applications where low sensitivity to eccentric load is important. Available in capacities from 50 lbf. to 300 lbf. |  | 2451-2461 Stainless Steel Compression-Only Load Cell
Interface has developed the new compact compression only 2451/2461 for applications requiring a very small footprint. The 2451 comes in 3 capacities, 50, 75, and 100K, each only 4.5” in diameter. The 2461 comes in 2 capacities, 150 and 200K, each only 5.5” in diameter. | | Load Cells / Force Transducers - Miniature | | | ELFF Load Cell
The ELFF is a compression or tension & compression load cell typically used in surface mount assembly system force feedback, robotics end effectors, weighing, dental and biomechanical parameter measurements, satellite and aerospace force feedback, and ultra low deflection applications. Available in capacities from 10 lbf. to 100 lbf. | | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. | | LBM Compression Load Button
The LBM is a compression only load button designed for relatively small spaces. Available in capacities from 25 lbf. to 50K lbf. | | MB Miniature Beam Load Cell
The MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 5 lbf. to 250 lbf. | | MBI Fatigue Rated Mini Beam Overload Protected Load Cell
Similar to MBP mini beam but with better resistance to off center loads. Available in capacities from 2 lbf. to 10 lbf. | | MBP Miniature Beam Overload Protected Load Cell
The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10 lbf. |  | SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |  | WMC Miniature Sealed Stainless Steel Load Cell (1K-10K lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 1K lbf. to 10K lbf. |  | WMC Miniature Sealed Stainless Steel Load Cell (5-500 lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 5 lbf. to 500 lbf. | | Load Cells / Force Transducers - Multi-Axis | |  | 5200 Multi-Axis Load Cell
The 5200 Low Profile load cell is designed for applications where it is required to measure moment loads as well as axial load to determine center of gravity or misalignment. Available in capacities from 1K lbf. to 50K lbf. | | Load Cells / Force Transducers - OEM | |  | FC22 Compression Load Cell
The FC22 is a low cost compression load cell that can measure ranges from 0 - 10 up to 0 - 100 lbf. Typical applications include medical infusion pumps, robotics end-effectors, variable force control, load and compression sensing, exercise machines, pumps, contact sensing, weighing, and household appliances. | | Load Cells / Force Transducers - Piezoelectric | |  | PACEline Piezoelectric Force Transducers (overview)
Your fitting and assembly processes are fast and space is a constraint. But you still expect consistently reliable quality control for your production. It’s time for PACEline. Compact and highly dynamic force measurement technology from HBM that makes the difference – and brings fresh impulses to piezo technology. |  | PACEline CFT Piezoelectric Force Transducer
CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic press-fit and assembly processes with fast force variations. |  | PACEline CMA Charge Amplifier
The PACEline CMA charge amplifier (analog amplifier) ensures reliable transmission of data from piezoelectric force transducers. This is done by signal conditioning to +/-10 V analog standard signals. |  | PACEline CMC - The piezoelectric force measurement chain
CFT piezoelectric force transducers and CMA analog amplifiers are combined to form a calibrated unit. Even with the most challenging task in your process monitoring: The CMC measurement chain keeps pace at any time. |  | PACEline CMD Digital Charge Amplifier
The digital charge amplifier for piezoelectric sensors assures multiple uses in many applications in the laboratory and production. The CMD600 measures very fast force, torque and pressure signals at frequencies of up to 30 kHz and can be used with piezoelectric sensors up to max. 600,000 pC (Pico coulombs). | | Load Cells / Force Transducers - S-Type | |  | SM S-Type Load Cell
The SM is a low cost highly accurate unsealed load cell for test machine and other general purpose applications. Available in capacities from 10 lbf. to 1K lbf. | | SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |  | SMT S-Type Overload Protected Load Cell
The SMT is ideal for low capacity applications where loads cells are often inadvertently overloaded. The SMT has internal mechanical stops permitting overloads up to 10 times rated capacity. Available in capacities from 1.1 lbf. to 450 lbf. |
| Mass Flow Sensors - Digital Mass Flow Meters & Controllers | |  | HFC-D-303 Digital Mass Flow Controller
The model HFC-D-303 digital mass flow controller features a fast response and a low pressure drop. It has RS232/485 communication, self-diagnostics, and a normally closed valve for flow control. Available in ranges from 0 - 25 to 0 - 1,000 slm (N2 Equivalent). |  | HFC-D-307 Digital Mass Flow Controller
The model HFC-D-307 digital mass flow controller features a fast response and a low pressure drop. It has RS232/485 communication, self-diagnostics, and a normally closed valve for flow control.. Available in ranges from 0 - 1000 to 0 - 3000 slm (N2 Equivalent). |  | HFM-D-301 Digital Mass Flow Meter
The model HFM-D-301 digital mass flow meter features a fast response and a low pressure drop. It has RS232/485 communication and self-diagnostics. Available in ranges from 0 - 25 to 0 - 1,000 slm (N2 Equivalent). |  | HFM-D-305 Digital Mass Flow Meter
The model HFM-D-305 digital mass flow meter features a fast response and a low pressure drop. It has RS232/485 communication and self-diagnostics. Available in ranges from 0 - 1000 to 0 - 3000 slm (N2 Equivalent). | | Mass Flow Sensors - Mass Flow Meters & Controllers | |  | HFC-202 Mass Flow Controller
The model HFC-202 is a general purpose mass flow controller, which features a normally closed valve for flow control. Available in ranges from from 0 - 10 to 0 - 25,000 sccm (N2 Equivalent). |  | HFC-203 Mass Flow Controller
The model HFC-203 is a general purpose mass flow controller, which features a normally closed valve for flow control. Available in ranges from 0 - 30 to 0 - 500 slm (Air Equivalent). |  | HFC-302 Mass Flow Controller
The model HFC-302 mass flow controller features a fast response and a low pressure drop. It has a a normally closed valve for flow control. Available in ranges from 0 - 5 to 0 - 25,000 sccm (N2 Equivalent). |  | HFC-303 Mass Flow Controller
The model HFC-303 mass flow controller features a fast response and a low pressure drop. It has a a normally closed valve for flow control. Available in ranges from 0 - 25 to 0 - 1,000 slm (Air Equivalent). |  | HFM-200 Mass Flow Meter
The model HFM-200 is a general purpose mass flow meter. Available in ranges from 0 - 10 to 0 - 25,000 sccm (N2 Equivalent). |  | HFM-200 Mass Flow Meter with Laminar Flow Element
The model HFM-200 with an LFE provides fast, accurate measurement of high-capacity gas flows, in ranges from 25 slm up to 15,000 slm. The laminar flow elements are available in various sizes from 3/8" up to 8". Used in conjunction with the standard HFM-200, these units can be combined to measure full-scale flows up to 15,000 slm. |  | HFM-201 Mass Flow Meter
The model HFM-201 is a general purpose mass flow meter. Available in ranges from 0 - 30 to 0 - 500 slm (Air Equivalent). |  | HFM-300 Mass Flow Meter
The model HFM-300 mass flow meter features a fast response and a low pressure drop. Available in ranges from 0 - 5 to 0 - 25,000 sccm (N2 Equivalent). |  | HFM-301 Mass Flow Meter
The model HFM-301 mass flow meter features a fast response and a low pressure drop. Available in ranges from 0 - 25 to 0 - 1,000 slm (Air Equivalent). |  | HFM-305 Mass Flow Meter
The model HFM-305 mass flow meter features a fast response and a low pressure drop. Available in ranges from 0 - 1,000 to 0 - 2,500 slm (Air Equivalent). | | Mass Flow Sensors - Powerpods (Power Supply/Digital Indicator) | | | THPS-100 Single Channel PowerPod
The THPS-100 is a self-contained power supply and display designed for gas mass flow-meters. It features an automatically generated set point (0-5V or 0-10V) and RS232 communication. | | THPS-400 Four Channel PowerPod
The THPS-400 is a power supply and indicator capable of displaying four channels simultaneously. It has an integrated totalizer, filter function, and Serial communication. Has the ability to set ratio control for gas blending applications. |
| Piezo Film - Instrumentation | |  | Piezo Film Lab Amplifier
The Piezo Film Lab Amplifier is a versatile preamplifier for use with Piezoelectric sensors. Provides a wide range of sensitivity adjustment in either voltage or charge modes, and the functionality of the high- and low-pass filters. | | Piezo Film - Piezo Film Elements | |  | CM-01B Contact Microphone
The CM-01B Contact Microphone uses sensitive but robust PVDF piezo film combined with a low-noise electronic preamplifier to provide a unique sound or vibration pickup with buffered output. | | Piezo Film - Piezo Film Sheets | |  | Metallized Piezo Film Sheets
Piezo film is available in a variety of different film sizes and thicknesses. These can be fabricated into simple transducers, or for use as full size sheets for applications such as speakers. | | Piezo Film - Piezo Switches and Ultrasonic Sensors | |  | 40kHz Digitizer Transmitter & Receiver
Piezoelectric film (PVDF) ultrasound transmitter and receivers offer unique advantages for air ranging applications such as two-dimensional positioning, digitizer, object detection, and distance measurement. |  | 80kHz Cylindrical Ultrasound Transducer
Piezoelectric film (PVDF) ultrasound transducers offer unique advantages for air ranging applications such as two-dimensional positioning, digitizer, object detection, and distance measurement. |
| Pressure Sensors & Transmitters - Board Mountable / OEM | |  | Ares Pressure Sensor
The ARES Series is a small, low cost pressure transducer which is able to measure pressures as low as 0 to 5 inches of water, 0 to 10" of water, 0 to 15" of water, and 0 to 1 psi. Sensitivity to extremely low pressures and small size make this device ideally suited for HVAC, medical equipment, and flow monitoring applications. The GA100 series has a 4V span from 0.50V to 4.50V and the GA200 series has a 3.75V span from 0.25V to 4.00V. | | Pressure Sensors & Transmitters - Pressure Transducers | |  | LM Liquid Level Pressure Transducer
The LM Series incorporates stainless steel and plastic isolation suitable for level sensing in water, other liquid and gas. It uses a stainless steel sensor in a PVC plastic fitting, and provides an output of .5V to 4.5V with a 5V supply. Available in 0 - 1 up to 0 - 150 PSIG ranges. |  | M5100 MicroFused Pressure Transducer
The M5100 sets the price / performance standard for transducers used in demanding environments. The pressure port is machined from a solid piece of 17-4PH stainless steel. There are no O-rings, organics or welds exposed to the pressure media. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |  | MSP300 MicroFused Pressure Transducer
The MSP300 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. It is geared to the OEM customer using medium to high volumes. Available in ranges from 0 - 100 up to 0 - 10,000 PSIG. |  | MSP340 MicroFused Pressure Transducer
The MSP340 is similar to the MSP300, but features a smaller body diameter. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |  | U5100 UltraStable Pressure Transducer
The UltraStable™ technology employs a silicon-based strain gauge isolated by an oil-filled capsule and a stainless steel diaphragm. The U5100 features 100% 316L media isolation, excellent long term stability, and 0.1% FS combined accuracy. Available in ranges from 0 - 15 up to 0 - 10,000 PSI, in gage and absolute pressure. |  | US300 UltraStable Pressure Transducer
The UltraStable™ technology employs a silicon-based strain gauge isolated by an oil-filled capsule and a stainless steel diaphragm. The US300 incorporates stainless steel isolation, and a wide range of standard pressure ranges and electrical outputs in a very compact package. Available in ranges from 0 - 15 up to 0 - 5,000 PSI, in gage and absolute pressure. |
| Rotary Position Sensors - Hall Effect | |  | NRH280 Noncontact Rotary Hall Sensor
Rotary position sensor that features a 2-piece unit - fully sealed sensor assembly and magnetized bolt. Single or dual outputs available. |  | SRH280P & SRH280DP Contactless Rotary Position Sensor
For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68. |  | TPS280DP Throttle Position Sensor
TPS280DP is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centers and is designed to interface with most common throttle body D type spindles. The sensor has a choice of 200 or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the FDR-25 sheathed spec 55A cable. With sealing to IP69K, it is also able to withstand high pressure wash-downs. | | Rotary Position Sensors - Potentiometers | |  | SRS280 Sealed Rotary Potentiometer
The SRS280 was developed to meet the harsh operating requirements of today´s automotive and motorsport markets. It uses hybrid potentiometer track technology, providing high stability under extremes of temperature and humidity |  | SRS880 Submersible Rotary Potentiometer
The SRS880 can meet the harsh operating requirements of applications such as construction, agricultural, military and utility vehicles, steelworks and power generating plants. This model can operate at a submerged depth of 2m (6.5 feet). |
 | 500 In-Line Signal Conditioner
Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth. |  | ATA-2001 Amplifier
The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility. |  | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |  | DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration. |  | EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user. |  | INF-USB Universal Serial Bus Output Module
The INF-USB module allows measurements from load cells, torque sensors, or other sensors to be acquired by USB. System also includes graphing and logging software. |  | LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors. |  | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. |  | SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors. |  | UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation. | | Signal Conditioning - Distributed IO | |  | ioPro Distributed IO
The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved performance. |
| Software - Data Analysis Software | |  | GlyphXE Analysis Software
Integrated and powerful analysis methods for post-processing of your measured data make GlyphXE the technically mature, professional tool for your test projects. At the same time, GlyphXE convinces through maximum ease of use - even for occasional users. GlyphXE provides a graphical user interface that enables you to develop individual analyses and computations step by step. No programming knowledge or learning of a special script language is required. | | Software - Measurement Software | |  | Catman AP Software
Benefit from the new generation of data acquisition software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP. |  | Catman Easy Software
With catman®Easy you can perform a large number of different measurement tasks quickly and simply... without wasting time or effort on programming. Thanks to the optimal interaction between hardware and software, you can configure your amplifier much faster. You can also quickly define your measurement parameters such as sampling rates, trigger settings, as well as select your preferred visualization mode. |  | Catman Enterprise Software
The catman®Enterprise software suite was specifically developed for high channel-count measurement using the MGCplus DAQ system. A dedicated measurement-data server (MDS) performs the actual measurement. You can connect a number of client PCs to simultaneously access data on the MDS server. This enables you to monitor and evaluate your high channel-count measurement processes in real time. |  | Catman Professional Software
Catman®Professional enables you to easily configure connected amplifiers and intuitively define, run and automate your measurement sequences without any programming knowledge. Measured values can be visualized in real time or after measurement has been concluded for reporting purposes. Recurring measurement tasks are greatly simplified as catman® can be used to automate each sequence. |  | Perception Software
Perception is a modularly structured software package for high speed measurement data acquisition and it accomplishes all tasks in the measurement sequence: Parameterization of sensors and control of measurement instruments, Real-time display of measured values, Storage and playback, and Analysis and report generation. The special features in Perception enable rapid setup times, rapid familiarization and therefore the immediate start of the measurement campaign. |  | Perception Software - advanced exports
For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular programs. Extensive built-in set-up options let you export the data of interest the way you want, and nothing more. In addition, these exports can be combined with the powerful automation and post processing features included as standard in Perception. |  | Perception Software - analysis
Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The formula results can be re-used in other formulas to get even more advanced answers. |  | Perception Software - basic FFT
The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore the user can obtain valuable information about the content of mixed signals like vibrations, shocks or noisy signals beyond what is visible in a time domain display. |  | Perception Software - HPHV automated analysis
The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate
reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately and in an automated manner. |
| Strain Gauges - Accessories | |  | DAK1 Strain Gauge Starter Kit
The starter kit DAK1 provides the first time user with a low cost and interesting option to start with the application of strain gauges. The well-designed and robust plastic case contains all aids required for initial applications. |  | DAK2 Strain Gauge Installation Case
The strain gauge installation case DAK 2 contains all tools and aids required for strain gauge installations. It is portable and lockable. Dimensions: 470 x 170 x 360 mm Weight: approx. 6 kg (incl. standard scope of delivery). |  | LS Solder Terminals
Terminal strips for mounting the strain gauge leads and connecting cabling. |  | RMS1 Cleaning Solvent
Satisfactory bonding joints are only achieved if the adhesive covers the bonded surfaces well. Therefore, the application surfaces must be cleaned prior to bonding with a chemically pure solvent and a clean cleaning pad. RMS1 is an environmentally friendly mixture of Isopropanol and Acetone which dissolves all normal contamination. | | Strain Gauges - Adhesives | |  | BCY01 Accelerator for Z70
BCY01 is an activator for the Z70 cyanacrylate adhesive. The curing of Z70 depends on the chemical state of the parts to be joined. There are conditions where curing may take place slowly or even remain incomplete; such as dry air (relative humidity below 40%), acid surfaces or too low temperature. In these cases the curing time can be shortened with the BCY01 activator. |  | EP150 Hot-Curing Single Component Adhesive
Epoxy resin adhesive that can be used with all types of strain gauges. Storage time(dry): 12 months in refrigerator (+7°C). Application temperature range: -70°C ... +150°C with zero-point related measurements (static) and with non zero-point related measurements (dynamic). |  | X280 Cold-Curing Two Component Adhesive
X280 is a two-component epoxy resin adhesive. As a cold curing adhesive it is easy to use and can be processed at minimum cost and effort. It hardens under normal ambient conditions. X280 is suitable for smooth and absorbent surfaces. |  | X60 Cold-Curing Two Component Adhesive
X60 is a 2-component fast curing adhesive, consisting of a liquid component (B) and a powder (component A). Typical application fields are: low temperature, porous materials as well as for securing the cables. |  | Z70 Cold-Curing Single Component Adhesive
Z70 is a single component, cold curing adhesive made of cyanacrylate. Curing is only possible on very slight adhesive films and at room temperature under thumb pressure. The air humidity needs to be between 40% and 70% as a catalyst for the curing process. | | Strain Gauges - Low Cost Strain Gauges | |  | Showa Strain Gauges - general specifications
Low cost strain gauges suitable for structural strain measurement in civil engineering laboratories and other general purpose applications. Available in uniaxial, biaxial, triaxial, and specialty versions in a variety of patterns. |  | Showa Solder Terminals & Adhesives
Select solder terminals and adhesives suitable for your strain gauge application. |  | Showa Strain Gauges
Find the specific part number of the strain gauges according to your application. | | Strain Gauges - Optical Strain Gauges | |  | Optical Strain Gauges
Benefit from the many new advantages of measuring with light - without having to abandon the ruggedness and convenience of the classical strain gauge. HBM's optical strain gauges are made from fibers of glass with a very small core diameter of no more than 5 micrometers. In comparison, the diameter of human hair ranges from 60 to 80 micrometers. The fiber core is surrounded by a cladding layer from purest glass with a diameter of 125 micrometers. | | Strain Gauges - Protective Coatings | |  | ABM75 Aluminum Foil c/w Kneading Compound
ABM75 is an aluminum foil c/w kneading compound for sealing. Recommended to use in conjunction with AK22. Supplied in 11 pcs of 205mm x 100mm. |  | AK22 Viscous Putty
AK22 is a tough, kneadable putty, strongly adhering on nearly every material. At very high accelerations (e.g. stroke or fast rotation) the AK22 may move its position because of its high mass. AK22 does not harden so there is no question of its hindering movement at the gauge area. An optimum protection can be reached by putting a layer of ABM75 on top of the AK22. | | Strain Gauges - Strain Gauges | |  | C Series Strain Gauges
The specialist for extreme temperatures. |  | LE11 Encapsulated Strain Gauge
Encapsulated strain gauge with stranded wire - moisture proof and resistant against chemicals. |  | LI66 Fiber Composite Material Strain Gauges
LI66 strain gauges for integration in fiber composite materials. |  | LY11 Micro Strain Gauge
LY11-0.3/120 micro strain gauges: Certainty, even if every millimeter counts. Ever smaller, ever more performance: The trend toward miniaturization of components is an ongoing challenge. Where every millimeter counts, the new 1-LY11-0.3/120 micro strain gauge ensures significant reliability while requiring only a minimum of space. |  | Pre-Wired Strain Gauges
Strain gauges with connection cable and optional RJ11 plug. For experimental stress analysis, HBM has introduced a series of strain gauges with pigtails, based on the series that has proved its worth in stress analysis, the Y-series. The pre-wired strain gauges are provided with 50 mm-long teflon-insulated connection wires. These strain gauges are specifically customized with optional pigtail lengths (0.5 m to 10m) connected in 2, 3 or even 4-wire circuits. |  | RDS Crack Propogation Gauges
Crack propagation gauges - RDS20, RDS22, RDS40. Using crack propagation gauges, it is possible to determine the crack propagation on a component. |  | V Series Strain Gauges
Encapsulated strain gauges with 3m stranded connection wire. |  | Y Series Strain Gauges
General purpose gauges for most experimental stress analysis applications. | | Strain Gauges - Temperature Sensor | |  | TT-3-100 Temperature Sensor
The temperature sensor that is installed as easily as a strain gauge. TT-3/100 is a temperature sensor that can be used as easily and flexibly as a classical strain gauge. TT-3/100 is the ideal choice, if your measurement task involves measuring strain in particular - and, additionally - temperature values. |
 | AccuStar Electronic Clinometer
The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. Designed for easy integration, with a choice of analog, ratiometric, digital or serial models, the clinometer produces an output signal corresponding to direction and magnitude of angular displacement. Features a linear range of ±45°. |  | LCI Inclinometer
The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis. |  | LCI-360 Inclinometer
The JEWELL LCI-360 is a biaxial inclinometer that meets the needs of high accuracy applications with low shock and vibration. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at low frequencies. |  | NS-10E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±10° and a voltage output. |  | NS-15E Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±15° and a voltage output. |  | NS-45E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±45° and a voltage output. |  | NS-5E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±5° and a voltage output. |  | NS-P Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. They feature an aluminum baseplate and IP 65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. |  | STT280 Sealed Tilt Sensor
The STT280 is provided in an extremely compact housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems. | | Tilt Sensors & Inclinometers - Digital Protractors | |  | AngleStar Electronic Protractor System
The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable. There are three systems to choose from: ±19.99 degrees with a 0.01 degree resolution, ±45°, or a +90° with 0.1 degree resolution. |  | DP-45 AngleStar Digital Protractor
The AngleStar® Digital Protractor Model DP-45 provides instant digital display of level, angle and tilt. Consists of a rugged electronic sensor, custom circuitry and liquid crystal display in an easy-to-use, hand held battery powered package. Features a range of ±45°. |
| Torque Sensors - Non-Contacting / Torque Flanges | |  | T22 Torque Transducer
The T22 is an attractively priced transducer for simple torque applications. It comes with integrated electronics; this saves time and costs – no additional, external amplifiers are required for upgrading your measurement chain. Matched couplings are available for all T22 sizes. Its' compact design is perfectly suited for test benches where space is a constraint. | | Torque Sensors - Slip-Ring | |  | T5 Torque Transducer
The T5 torque transducer is designed for occasional, simple torque measurement tasks in the laboratory, teaching and testing sector. The cylindrical shaft ends allow torque to be applied without play. Slip-ring transfer allows all industry-standard amplifiers for SG full bridges to be used. Available in ranges from 10 N•m to 200 N•m. |
| Weighing - Single Point | |  | HBM Single Point Load Cells
The term platform scale nowadays covers a wide field of application in the industrial weighing technology. It covers the design and configuration of equipment such as high-precision laboratory balances, shop-counter scales and personal weighing machines right through to post office weighers, medical scales etc. Platform scales are characterised by one or more load cells, usually arranged under a platform (scale pan) on which the goods intended for weighing are placed. |
|
|
|
|
|
|
|