Durham Instruments

Accelerometers

	1201 Crash Test Accelerometer The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g.
	1201F Crash Test Accelerometer The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g.
	1210F Accelerometer The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and frequency response to 2000 Hz.
	201 Accelerometer The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g.
	203 Accelerometer The Model 203 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g.
	3801A Accelerometer The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. Available in ranges from ±2g to ±2000g.
	4000A Accelerometer Economical, signal conditioned with integral temperature compensation. Rugged aluminum housing ideal for transportation and instrumentation testing. Available in ±2g to ±200g.
	4001A Accelerometer The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates an integral 5-pin connector at the end of the cable assembly. Available in ranges from ±2g to ±200g.
	4002 Accelerometer The Model 4002 is a low frequency DC response accelerometer with exceptional resolution. The accelerometer is designed for optimum signal-to-noise ratio and offers an amplified signal conditioned output. Available in ranges from ±2g to ±200g.
	4600 Accelerometer The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4602 Accelerometer The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4605 Accelerometer The Model 4605 is designed for both static and dynamic measurements in critical and demanding applications. The device offers outstanding thermal performance and features a detachable cable. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4610 Accelerometer The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4620 Accelerometer The Model 4620 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device incorporates a Teflon insulated cable with a rugged strain relief designed for demanding applications. Provides an amplified output. Available in ranges from ±2 to ±250g.
	4623 Accelerometer The Model 4623 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device features EMI/EMC protection circuitry and a rugged strain relief for harsh installations. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4630 Triaxial Accelerometer Low noise; static & dynamic response. The 3 circuit assemblies are hermetically sealed. Operates on common or separate power supplies. Ranges from ±2 to ±500g.
	4801A Accelerometer The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output, enhanced temperature compensation, and shock protection up to 10,000g. Available in ranges from ±2 to ±500g.
	4803A Triaxial Accelerometer The Model 4803A is a low noise triaxial accelerometer in a rugged, welded stainless steel package. The silicon MEMS accelerometer incorporates integral temperature compensation and provides an amplified output. Available in ranges from ±2 to ±500g.
	4807A Accelerometer The Model 4807A is an ultra low noise DC response accelerometer offering micro-g resolution. The accelerometer is sealed in a welded stainless steel package and offers an amplified signal conditioned output in ranges from ±2 to ±200g.
	4810A Accelerometer The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package. It features a detachable cable, temperature compensation, and a signal conditioned output. Available in ranges from ±2 to ±500g.
	52 Crash Test Accelerometer The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit has been designed for side impact crash applications. Available in ranges from ±50g to ±2000g.
	52F Accelerometer This unit features a full bridge output with an operating temperature range from -40 to +90°C. A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 7kHz.
	52M30 Crash Test Accelerometer The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit has been designed for side impact crash applications. Features an aluminum housing and jacketed cable. Available in ranges from ±50g to ±2000g.
	52M32 Accelerometer This unit features a full bridge output with an operating temperature range from -40 to +90°C. A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 6kHz.
	606M1 Accelerometer A MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data.
	62 Crash Test Accelerometer The Model 62 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. Available in ranges from ±50g to ±6000g.
	7101A IEPE Accelerometer The Model 7101A is a miniature, high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz.
	7102A Accelerometer The Model 7102A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a welded hermetic Titanium construction with an M3 connector.
	7104A IEPE Accelerometer The Model 7104A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a side mount 10-32 coaxial connector.
	7105A IEPE Accelerometer The Model 7105A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a top mount 10-32 coaxial connector.
	7108A IEPE Accelerometer The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a coaxial 10-32 top connector.
	7109A Accelerometer The Model 7109A is a miniature stud mount IEPE shock accelerometer available in ±5,000g to ±20,000g ranges. The accelerometer features a welded hermetic stainless steel construction with an integral cable for electrical connection.
	7114A IEPE Accelerometer The Model 7114A is a high performance IEPE accelerometer available in ±5g to ±50g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a side mount connector.
	7120A IEPE Accelerometer A high performance IEPE accelerometer designed for modal applications. The accelerometer is available in ±50g to ±500g dynamic ranges and offers a flat frequency response to >6kHz. Features a hermetic welded Titanium construction with a side mount connector.
	7130A Triaxial IEPE Accelerometer The Model 7130A is a triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The unit features a hard anodized aluminum housing, and has a flat frequency response to 9kHz.
	7131A Triaxial IEPE Accelerometer The Model 7131A is a miniature triaxial IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a hermetically sealed Titanium construction with a 4-pin Microtech connector interface.
	7132A Triaxial IEPE Accelerometer The Model 7132A is a miniature triaxial IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface.
	7134A Triaxial Accelerometer The 7134A is a true case isolated triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. Features three internally shielded accelerometer assemblies for superior noise isolation. The assemblies are installed in a hermetically sealed light weight Titanium housing with a 4-pin Microtech connector interface.
	7204A IEPE Accelerometer A case isolated high temperature IEPE accelerometer with internal shielding. Has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. Available in ±50 to ±500g ranges.
	7500A Charge Accelerometer The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has charge output of 20pC/g, and provides stable thermal response up to +260°C. Available in ±250g up to ±2000g dynamic range.
	7502A Charge Accelerometer The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has a charge output of 1.6pC/g, and provides stable thermal response up to +200°C. Available in ±5000g dynamic range.
	7504A Charge Accelerometer A stud mounted piezoelectric charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz.
	7505A Charge Accelerometer A stud mounted piezoelectric charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz.
	7508A Charge Accelerometer The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. With a nominal charge output of 5.6pC/g the model 7508A offers a high signal to noise ratio in a miniature package. Available in ±2000g dynamic range.
	7514A Charge Accelerometer The Model 7514A is a stud mounted piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g. Available in dynamic ranges of ±500g to ±2000g.
	7530A Triaxial Charge Accelerometer The Model 7530A is a triaxial piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It provides a stable thermal response up to +200°C and a nominal charge output of 5.6pC/g. Available in ±2000g dynamic range.
	8011-01 & 8012-01 IEPE Accelerometer The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
	8011-06 Velocity Transducer The Model 8011-06 is an internally shielded piezo velocity transducer designed for condition monitoring of low frequency rotating machinery. The transducer is available in ranges from 10.0 to 50.0 in/sec and interfaces with the standard IEPE constant current supply.
	8011-VR & 8011-VP Velocity Transmitter The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector and is designed to operating in temperature ranges from -40°C to +85°C. The unit is hermetically sealed and features the popular stud mount installation.
	8021-01 & 8022-01 IEPE Accelerometer The Model 8021-01 & 8022-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. They are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 12kHz. The units are hermetically sealed and can operate in temperature ranges from -55°C to +125°C.
	8032 IEPE Accelerometer The Model 8032-01 is an internally shielded rugged IEPE accelerometer designed for harsh environments. It is available in ±50 to ±500g dynamic ranges and has a flat bandwidth up to greater than 12kHz. Features an integral molded strain relief and is designed to operating in temperature ranges from -55°C to +100°C.
	8042-01 Accelerometer The Model 8042-01 is a submersible IEPE accelerometer designed for harsh environments. The accelerometer is available in ±10g, ±80g & ±500g dynamic ranges and feature a welded Titanium housing.
	8102 Triaxial Piezoelectric Accelerometer The Model 8102 is a low cost, plug & play triaxial accelerometer. It incorporates full power and signal conditioning with a maximum current consumption of only 22 micro-amps. Available from ±25g to ±6000g ranges and provides a flat frequency response up to 6kHz.
	DXA-100 & DXA-200 Series Accelerometer The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS485 and RS422 outputs.
	EGAS Accelerometer The Model EGAS is a miniature, uniaxial accelerometer featuring ranges from ± 5 g’s through 2500 g's.
	EGAS3 Triaxial Accelerometer The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g.
	EGAXT Accelerometer The Model EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g.
	EGCS-A2 & EGCS-B2 Accelerometers The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±5000g.
	LCA-100 Accelerometer The Jewell LCA Series Accelerometer is a general-purpose ±0.5G to ±5G device designed for industrial, commercial and aerospace sensing requirements.
	LCF-200 Accelerometer The Jewell LCF Series Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.
	LCM-100 Accelerometer The Jewell LCM accelerometer is a general-purpose acceleration sensor for industrial, commercial and aerospace applications.
	LSB Accelerometer The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G device designed forindustrial, commercial and aerospace sensing requirements.
	LSM Accelerometer The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube.
	LSXH Accelerometer The JEWELL LSXH is the most rugged of all of our accelerometers. The JEWELL LSXH is a compact high-performance, high-accuracy accelerometer with a range of 0.017G to 10G full scale.
	MiniSense 100 Accelerometer The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts.

Belt Misalignment

	BA100-1 Conveyor Belt Alignment Switch Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
	BA100-1X Conveyor Belt Alignment Switch Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure.
	BA100-2 Conveyor Belt Alignment Switch Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
	BA100-2X Conveyor Belt Alignment Switch Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing.
	Rub Block Door Assemblies Rub Block Door Assemblies are designed for quick and easy inspection of belts and replacement of worn rub blocks saving time and promoting regular maintenance inspections.

Calibration Services

Traceable Load Cell Calibration Services
Individual load cell calibration and system calibration. Licensed to service the Canadian market only.

Calibration Systems & Components

	DMP40 Digital Precision Measuring Amplifier The DMP40 is especially suitable for high precision comparative measurements of mechanical quantities such as force, mass, torque and pressure. One example of this is the measurements performed by the National Metrological Organizations like the PTB (German Metrology Institute). In this field of application the preceding model (DMP39) has already been employed as a reference instrument throughout the world.
	Gold Standard E4 Machine Calibration System It is necessary to recalibrate materials test machines and presses because of, possible undetected damage, normal wear and tear and to make sure the system is performing to its design capabilities. The Gold Standard E4 machine calibration system is a complete PC based system for the calibration of materials test machines. The system is user friendly and calibrations can be conducted with minimal training.
	Gold Standard Load Calibration System PC-based system for calibration of load cells and torque transducers. Normally used with hydraulic load frame. Separate software available for calibration of load cells in a deadweight system.
	Gold Standard™ Load Frames Available in capacities 3K, 10K, and 55K.
	HRBSC High Resolution Signal Conditioning Board The model HRBSC is a single-channel high resolution signal conditioning board. This board offers many additional features over the SCB1 for users requiring the highest levels of accuracy and precision.
	K148 Calibration Unit for full bridge amplifiers The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with measuring ranges from ±0.2 mV/V up to ±100 mV/V to be calibrated.
	K3607 Calibration Unit The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement chain. For this purpose the calibration instrument is equipped with a high-precision resistance network in star configuration, designed to simulate 350-ohm strain gauge full-bridge transducers.
	K800 Calibration Unit for 8-channel quarter-bridge amplifiers The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy.
	SCB1 Signal Conditioning Board The SCB1 signal conditioning board comes in a one or two-channel configuration. The single-channel unit is used with a dead weight system and/or for test machine verification, while the two-channel unit is used for calibrations where a reference (Standard) load cell is being used. One channel is connected to the reference standard and one channel is connected to the cell being calibrated.

Control Potentiometers

	Accu-Dial Control Potentiometer The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).
	Accu-Tach Control Potentiometer The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).

Data Acquisition

Display & Panel Meters

	161 Signal Conditioner A 4-channel signal conditioning amplifier designed to be used with piezoelectric accelerometers (IEPE or Charge) and most other piezoelectric based transducers. The signal conditioner features broad bandwidth to 100kHz and 10Vpeak linear output.
	9320 Hand Held Digital Indicator The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant.
	9820 Digital Indicator Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector.
	9830 Digital Indicator Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector.
	9834 Digital Indicator For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector.
	9840 Intelligent Digital Indicator The 9840 is suitable for use in calibration labs, field service, or anywhere high accuracy is important. Features include a bipolar 6-digit 2-line display, remote sense, low noise, 22-bit resolution, USB port with RS232 communication, mV/V calibration and the ability to store up to 25 different sensors. 6-point linearization, unit conversion, front-panel tare. Self calibration via TEDS Plug & Play ready IEEE1451.4 compliance.
	9850 Multi-Channel Digital Indicator The model 9850's modular design allows the use of 7 different types of channel cards in 2 available channels. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging.
	9860 Digital Indicator Similar to the 9830 indicator, but with TEDS functionality.
	AC-D-4M Large Display Event Counter The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures.
	ATA-2001 Amplifier The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility.
	CT6000 Process Counter The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
	CVT Analog Vacuum Controller CVT Vacuum Controllers are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers operate in the same standard ranges as the VT meters with the addition of single or double user selectable control limits. Includes durable 10A SPDT control points. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes.
	Digital CVT Vacuum Controller The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes.
	Digital VT Vacuum Indicator The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes.
	DML300 Single Channel LVDT Panel Indicator The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. DML300 series indicators have a five digit display, transducer excitation supply and many software features including max/min memory and math functions. All models are fitted with two analogue outputs - a high speed analogue output for monitoring fast changes of sensor movement, and a separate, electrically isolated, scaleable analogue output.
	DMP200 Single Channel Digital Panel Indicator The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges.
	DSI-1000 Digital Slope Indicator A microprocessor based panel meter designed to take the output from Jewell's gravity referenced inclinometers and display it at an angle. The compact unit provides the ±15VDC sensor excitation with dual channel inputs condition the inclinometer output and displays the angle down to 0.001 degrees.
	DSI-2000 Digital Slope Indicator A microcontroller based touch screen display solution for pairing with most of Jewell Instruments Inclinometer offerings. The DSI-2000 performs real time sampling and geometric conversion from you +/- 5VDC output of the inclinometer or serves are a limited range high precision voltage tester.
	HPM 4-6 Portable Vacuum Indicator The Model HPM 4/6 is a compact, hand-held, digital display, battery operated control unit. When combined with the Teledyne Hastings Instruments (THI) rugged thermopile sensors it becomes a vacuum instrument designed for portability and ease of use in applications where AC power is not readily available. Operates with DV-4 and DV-6 series vacuum gauge tubes.
	Micro P Panel Meter The state of the art in programmable digital panel meters, counters, timers, and serially driven remote displays.
	Micro Series Counters - Timers Panel Meters The Micro-C, Mighty-1C and Mighty-5C models are offered in both a standard and extended version. The extended version offers advanced features such as simultaneous measurements of rate and total, linearizing of non-linear signal inputs, mathematical functions such as A channel plus B channel (A + B), stopwatch and phase angle measurements. The basic counter version may be used to measure rate, square root of rate (flowmeters), frequency, total, period and quadrature.
	Mighty-1 Large Digit Meters Micro "Mighty-1" Series of large-digit displays feature 1" (25.4 mm) high 7-segment digits and a sealed enclosure designed to withstand harsh industrial environments. The 1" digits are readable at up to 40 feet (12 m), which is 79% further than maximum reading distance of 22 feet (7 m) associated with the 0.56" (14.2 mm) digits found in most 1/8 size digital panel meters and counters.
	Mighty-5 Display The Mighty-5 stands out with 5" high digits made up of ultra-bright, discrete LEDs, plus an environmentally sealed NEMA-4X housing. Mighty-5 displays can be viewed in bright sunlight and installed outdoors. The display is dimmable for use indoors.
	MM40 Digital Indicator Features large 4 ½ digit LED display with full range from 19999 to 99999. The easy to use pushbutton zero adjustment and range configuration minimizes end-user setup time. Operating from 85 to 250VAC 50/60 Hz, with a rugged NEMA 4X/IP165, IP20 touch safe case perfect for laboratory and industrial environments.
	MP2000 Digital Indicator This microprocessor based LVDT indicator and set-point controller is designed for industrial and process control applications utilizing any LVDT/RVDT-based measurement device. In addition to displaying real-time readings of LVDTs, RVDTs and gage heads, the MP2000 also displays MIN, MAX, TIR, A+B and A-B values.
	MVD2510 Panel Meter Amplifier Control panel measuring amplifier for process control and test bencher.
	MVD2555 Panel Meter Amplifier Carrier frequency amplifier for panel mounting.
	PML-1000 Panel Meter The PML1000 is an AC line powered LVDT/RVDT panel meter that is ideal for industrial and test applications. For control applications, it has a fast (125 Hz) unscaled analog output, an isolated 0-10 VDC/4-20 mA scaleable output and optional serial 2 or 4 wire RS 422/485 communications.
	Scout55 4.8kHz Carrier-Frequency Amplifier The SCOUT55 measuring amplifier is suitable for recording and processing measured values from passive transducers. Transducers that can be connected are: strain-gauge half and full bridges, inductive half and full bridges, LVDTs, piezoresistive transducers, potentiometers.
	THCD-100 Single Channel Power Supply The THCD-100 is a fully integrated 5-digit display that features many user-convenient features including digital communications, alarm outputs with relays, configurable display units, multiple transducer supplies and more.
	THPS-100 Single Channel PowerPod The THPS-100 is a self-contained power supply and display designed for gas mass flow-meters. It features an automatically generated set point (0-5V or 0-10V) and RS232 communication.
	THPS-400 Four Channel PowerPod The THPS-400 is a power supply and indicator capable of displaying four channels simultaneously. It has an integrated totalizer, filter function, and Serial communication. Has the ability to set ratio control for gas blending applications.
	THPS-760 Plus Digital Vacuum Controller The THPS 760 Plus Vacuum Controller is an exceptionally stable, accurate and repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 41/2 digit meter indicates in 0.1 Torr units from 0.1 to 1000.0 Torr. Designed for use with the HPM-760S vacuum sensor.
	VT Analog Vacuum Indicator VT-Series Vacuum Gauges are available in three standard ranges: 0-100 mTorr, 0-1000 mTorr, and 0-20 Torr. A self-contained gauge circuit is attached to the rear of the direct reading meter. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes.

Encoders

Fluid Properties Sensors

Hazard Monitoring Systems

	Electro-Sentry 1 Single Leg System The Electro-Sentry 1 is a single leg, stand-alone system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime.
	Electro-Sentry Multi-Leg System The Electro-Sentry is a multi-leg system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime.

Humidity Sensors

	HM1500LF Humidity Sensor HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply.
	HM1520 Humidity Sensor HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply.
	HTM2500 Humidity and Temperature Sensor HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc.
	HTU1X Series Humidity & Temperature Sensor Based on the rugged MEAS humidity sensor, the HTU1X(F) Series modules are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs.
	Humidity Sensors (overview) Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve control and output.

Industrial Vibration Sensors

	VS-1 Vibration Monitor The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
	VS-1XP Vibration Monitor Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
	VS-2 Vibration Monitor Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load.
	VS-2XP Vibration Monitor Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
	VUM-800 Control Unit Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.
	VUM-800 Probe Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.

Joysticks

	JC Handles: Ergonomic Handles for JC Joysticks The Penny & Giles JC300, JC400, JC150, JC600, JC2000 and JC6000 range of single and multi-axis joystick controllers have a number of ergonomic handle designed to suit different functions.
	JC100 Single Axis Fingertip Joystick Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystick that provides smooth, precise fingertip control in one axis.
	JC120 Single Axis Fingertip Joystick Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths.
	JC150 Rugged Single-Axis Joystick The JC150 was designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are important.
	JC1500 Rugged Single Axis Contactless Joystick The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options.
	JC400 Multi-Axis Fingertip Joystick Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip control with sequential detent feel.
	JC6000 Rugged Multi-Axis Joystick The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.
	JC8000 Rugged Multi-Axis Joystick Controller The JC8000 is available with one or two axis configurations and is supplied with a non-contact Hall effect sensing system for maximum operational life. The compact size, high lever strength and superb proportional control are ideal for applications in physically demanding working conditions - such as skid steer loaders controls.

Lasers

	AccuProfile 620 Laser Profile Sensor The AccuProfile 620 Laser Profile Sensor produces a 2D profile of surfaces and objects with great precision. The line sensor is used to calculate dimensions such as width, thickness, height, gap, diameter and angles.
	AccuProfile 820 2D Laser Scanner The AccuProfile 820 2D laser scanners are high-accuracy sensors for industrial surface dimensioning and measurement applications. The scanner quickly and accurately generates low-noise 2D or 3D profile scans of objects, surfaces or scenes. The sensor automatically adjusts laser power and detector exposure to compensate for varying surface conditions.
	AccuProfile 920 Laser Scanner The AccuProfile 920 Laser Scanner is a turn-key scanning appliance for industrial and research applications. With a revolutionary aiming system the scanner can rapidly scan full 3D scenes or be configured to raster regions of interest to reveal surface detail with dimensions.
	AccuRange Line Scanner The AccuRange Line Scanner is precise spinning mirror assembly that when coupled with Acuity's laser rangefinder, creates a laser scanner. The laser scanner sweeps a laser spot through a 360° rotation for the measuring of profiles and scenes. The AccuRange line scanner is often further integrated to create 3D laser scanners.
	AR1000 Laser Distance Sensor The Acuity laser distance sensor model AR1000 can measure 30 meters with an accuracy of 3 mm. Using a reflective target board, the sensor will measure distances up to 150 meter. Ideal for measuring fill levels and material height monitoring, the AR1000 sensor can hold up to very tough environments.
	AR200 Laser Measurement Sensor The AR200 laser measurement sensor is Acuity's most compact product to employ a CMOS detector. Four metric models satisfy precision measuring requirements from 6 mm to 100 mm with up to 12 micron accuracy.
	AR2500 Laser Sensor AR2500 laser sensors are Acuity's ultra-compact rangefindermodels. This eye-safe rangefinder can measure to 30 KHz to natural targets 30 meters away or to reflectors 260 meters away. The AR2500 is also available in module format to system integrators and high-volume OEM customers.
	AR3000 Laser Distance Sensor AR3000 distance measurement sensors are Acuity's longest-range models. Ideal for measuring positions of cranes and trolleys, the pulse time-of-lfight sensor can reach 300 meters to normal surfaces and up to 3000 meters when using a reflective target. With sampling speeds to 2 KHz, the AR3000 sensors can monitor the speed of moving targets.
	AR4000 Laser Rangefinder Acuity's AR4000 series of laser rangefinders can accurately measure distances up to 16.5 meters. These unique devices employ time-of-flight measurement principles that enables sampling speeds to 200 KHz. When designated with the optional high power laser and band pass filter, the AR4000-LIR is used outdoors in bright sunlight.
	AR500 Laser Position Sensor The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes.
	AR700 Laser Displacement Sensor The AR700 laser displacement sensor is Acuity's newest, high-resolution sensor. Models vary in measuring range and can achieve resolutions better than 0.2 micron. Increased sampling speeds to 9.4 Khz satisfy the requirements of the road profiling industry.
	CCS Prima Confocal Sensor Acuity's most accurate and most resolute distance sensor employs a unique measuring principle, confocal chromatic sensing. Unlike our time-of-flight and triangulation sensors which use lasers, the CCS Prima Confocal sensors use a white light source to accurately measure the distance to surfaces. Some models are accurate to within 20 nanometers. Additionally, this technology permits measurement and profile of transparent materials like glass, lenses, liquids, etc.

Linear Position Sensor

Load Cells / Force Transducers

Mass Flow Sensors

Piezo Film

Pressure Sensors & Transmitters

Rotary Position Sensors

Signal Conditioning

	101 DC Signal Conditioner A 3-Channel DC Signal Conditioner Amplifier designed to be used with bridge type or differential output accelerometers and pressure transducers. With variable gain adjustment, shunt calibration capability, multiple excitation level settings, and a variety of optional filter modules.
	140 Inline Amplifier The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function.
	500 In-Line Signal Conditioner Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth.
	ATA-2001 Amplifier The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility.
	BSC4 4-Channel Bridge Amplifier Four channel bridge amplifier with voltage and current or USB output.
	CSC Inline Signal Conditioner Designed to be built into the load cell cable. Available with a range of voltage or current outputs.
	DCA Signal Conditioner 10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth.
	DF30CAN digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition.
	DF30DN digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition.
	DF30DP digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition.
	DF31CAN digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs.
	DF31DN digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs.
	DF31DP digiCLIP Digital Amplifier digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs.
	digiCLIP Digital Amplifier (overview) digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available.
	DMA Signal Conditioner Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
	EICT Signal Conditioning Module The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user.
	IAM Amplifier The compact IAM In-line Amplifiers provide a fixed 1, 10, 20, 50, 100, 200, 500 or 1000 100kHz – 3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection.
	IAMR Amplifier The compact IAMR In-line Amplifiers provide a fixed 10, 20, 50, 100, 200 or 500 Gain with 700kHz/G-3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection.
	IEM-422 Current Transmitter The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply.
	INF-USB Universal Serial Bus Output Module The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. Included graphing and logging software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for later research.
	LDM-1000 Signal Conditioner The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors.
	LiM-4-20 Transmitter Module The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. 4 to 20 mA output may be achieved with LVDT full scale outputs from 100 mV to 5.6 Volts rms.
	LVM-110 Voltage Module The LVM-110 is designed to be a low cost LVDT signal conditioning solution for OEM applications, and is compatible with most standard and special design Measurement Specialties LVDTs. Provides analog voltage output.
	MP01 Multi Channel PME Amplifier Multi-channel amplifier for applications in process supervision and industrial test-rig measurement technology.
	MP55 Single Channel PME Amplifier 4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers.
	MP55DP Single Channel PME Amplifier 4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers with DP interface.
	MP60 Single Channel PME Amplifier Single channel module for incremental transducers.
	MP60DP Single Channel PME Amplifier Single channel module for incremental transducers with Profibus DP interface.
	PME Industrial Amplifiers The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories.
	PMX Modular Amplifier System Precise acquisition of measurement signals at 19,200 samples per second. With 16 measuring channels and 32 calculating channels per module, and scaleable with additional modules. Uses real-time communication via Industrial Ethernet and a modern browser based user-software.
	SCM100 Signal Conditioner The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals.
	SGA Signal Conditioner User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings.
	SSC Signal Conditioning Module The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors.
	UCM Universal Signal Conditioner The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation.

Software

Solenoids

Speed Measurement

Strain Gauges

Technical Resources

TEDS - Plug & Measure

	HBM TEDS-Ready Amplifiers Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP
	TEDS Dongle The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle.
	TEDS Modules The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically.

Temperature

Tilt Sensors & Inclinometers

	25E2 Dual Axis Inclinometer The 25/E2-Series is a biaxial inclination sensor as a PCB Module for OEM use with measurement range +/-25°. It consists of dual basic inclination sensor cells based on a conductance measurement principle and their complete electronic biasing and readout, which is carefully designed in order to minimize drift and temperature effects.
	AAL Dual Axis Inclinometer The AAL-Series conductive inclination sensor offers a full calibrated inclination sensor module on a PCB. The sensor provides voltage output depending on the inclination angle and related to the specific axis, as well as a voltage based temperature output signal. An optional integrated e2-prom contains data on the characteristic curve resp. calibration data. Available in various ranges up to ±30°
	AccuStar Electronic Clinometer The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. Designed for easy integration, with a choice of analog, ratiometric, digital or serial models, the clinometer produces an output signal corresponding to direction and magnitude of angular displacement. Features a linear range of ±45°.
	AccuStar II - DAS20 Dual Axis Clinometer AccuStar® II/DAS-20 combines the function of two clinometers in one package. The unique dome shaped design features a capacitance based sensor which produces output signals directly proportional to the relative tilt in two axes. There are four output connections providing a choice of ratiometric, pulse width modulation (PWM) digital output. Features a range of ±20°
	AccuStar IP-66 Clinometer The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. Available in various ranges up to ±45°
	D-series Dual Axis Inclinometer The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals.
	DOG1 MEMS-Series Inclinometer The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including temperature compensation.
	DOG2 MEMS-Series Dual Axis Inclinometer A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations).
	DOG2 MEMS-Series USB Dual Axis Inclinometer The dual axis MEMS inclinometer has a measurement range of +/-90° inclination in both x-and y-axis. The rugged transducer design capable of functioning during and after severe shock loads and vibrations. This unit with USB interface is absolute plug & play functional and ideal for quick test and measurement jobs.
	DPG Dual Axis Inclinometer The DPG Series dual axis conductive inclinometer in aluminium housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to mount and absolute plug and play compatible. Available ranges from ±5° up to ±30°.
	DPL - DPN Dual Axis Inclinometer The DPL/DPN-Series is modern SMD technology based small board-level dual axis inclinometer applying conductive technology. It is available with both fully compensated digital output TTL/RS232 and/or analogue voltage output 0.3 to 4.7V. Available in ranges from ±2° up to ±30°.
	DQG2 Dual Axis Inclinometer A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°.
	DQL Dual Axis Inclinometer The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25°
	DXI-100 & DXI-200 Series Inclinometer The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485 outputs.
	E-Series Inclinometer The E-Series consists of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Available in ranges ±5° and ±15°.
	E2 Dual Axis Inclinometer The E2-Series is a biaxial inclination sensor as a PCB Module for OEM use with measurement range +/- 5°, +/- 10°, +/- 15° and +/- 45°.
	G-Series Inclinometer Switch This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°.
	LCF-196 Inclinometer The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF-196 is a two-axis unit housed in a 22mm diameter cylindrical package.
	LCF-2330 Inclinometer The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure suspension, servo technology in a small and convenient package for applications requiring a compact dual axis solution.
	LCI Inclinometer The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis.
	LCI-360 Inclinometer The JEWELL LCI-360 is a biaxial inclinometer that meets the needs of high accuracy applications with low shock and vibration. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at low frequencies.
	LSO Inclinometer Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies.
	LSR Inclinometer The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series.
	NS-10E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±10° and a voltage output.
	NS-15E Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±15° and a voltage output.
	NS-15E Inclinometer The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±15°
	NS-45E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±45° and a voltage output.
	NS-5E Inclinometer The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±5°
	NS-5E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±5° and a voltage output.
	P-Series Inclinometer The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°.
	STT280 Sealed Tilt Sensor The STT280 is provided in an extremely compact housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
	STT500 Sealed Tilt Sensor The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
	V-Series Inclinometer The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.

Torque Sensors

Vacuum Pressure Sensors

Weighing