|
|
|
 |
|
|
|
Packaging is the science, art and technology of enclosing or protecting products for distribution, storage, sale, and use. Sensor technology is often utilized in the production of packaging machinery such as Blister Packs and Vacuum Packaging, Cartoning, Conveyor Systems, Filling and Feeding Machines etc. |
|
|
 Products |
| |
 | 4630 Triaxial Accelerometer
Low noise; static & dynamic response. The 3 circuit assemblies are hermetically sealed. Operates on common or separate power supplies. Ranges from ±2 to ±500g. |  | LCM-100 Accelerometer
The Jewell LCM accelerometer is a general-purpose acceleration sensor for industrial, commercial and aerospace applications. |  | LSM Accelerometer
The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube. |  | LSXH Accelerometer
The JEWELL LSXH is the most rugged of all of our accelerometers. The JEWELL LSXH is a compact high-performance, high-accuracy accelerometer with a range of 0.017G to 10G full scale. |
 | BA100-1 Conveyor Belt Alignment Switch
Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC. |  | BA100-1X Conveyor Belt Alignment Switch
Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure. |  | BA100-2 Conveyor Belt Alignment Switch
Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC. |  | BA100-2X Conveyor Belt Alignment Switch
Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing. |
 | Accu-Dial Control Potentiometer
The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP). |  | Accu-Tach Control Potentiometer
The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP). |
| Data Acquisition - Universal Data Acquisition |  |  | QuantumX MX440A 4-channel Universal Amplifier
4 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |
 | 9320 Hand Held Digital Indicator
The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant. |  | 9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector. |  | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality. |  | AC-D-4M Large Display Event Counter
The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures. |  | CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application. |  | DML300 Single Channel LVDT Panel Indicator
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. DML300 series indicators have a five digit display, transducer excitation supply and many software features including max/min memory and math functions. All models are fitted with two analogue outputs - a high speed analogue output for monitoring fast changes of sensor movement, and a separate, electrically isolated, scaleable analogue output. |  | DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges. |  | Micro P Panel Meter
The state of the art in programmable digital panel meters, counters, timers, and serially driven remote displays. |  | Micro Series Counters - Timers Panel Meters
The Micro-C, Mighty-1C and Mighty-5C models are offered in both a standard and extended version. The extended version offers advanced features such as simultaneous measurements of rate and total, linearizing of non-linear signal inputs, mathematical functions such as A channel plus B channel (A + B), stopwatch and phase angle measurements. The basic counter version may be used to measure rate, square root of rate (flowmeters), frequency, total, period and quadrature. |  | Mighty-1 Large Digit Meters
Micro "Mighty-1" Series of large-digit displays feature 1" (25.4 mm) high 7-segment digits and a sealed enclosure designed to withstand harsh industrial environments. The 1" digits are readable at up to 40 feet (12 m), which is 79% further than maximum reading distance of 22 feet (7 m) associated with the 0.56" (14.2 mm) digits found in most 1/8 size digital panel meters and counters. |  | MVD2510 Panel Meter Amplifier
Control panel measuring amplifier for process control and test bencher. |  | MVD2555 Panel Meter Amplifier
Carrier frequency amplifier for panel mounting. |  | Scout55 4.8kHz Carrier-Frequency Amplifier
The SCOUT55 measuring amplifier is suitable for recording and processing measured values from passive transducers. Transducers that can be connected are: strain-gauge half and full bridges, inductive half and full bridges, LVDTs, piezoresistive transducers, potentiometers. | | Display & Panel Meters - Motion & Motor Controllers | |  | MicroLength 196 Closed Loop Position-Length Controller
The MicroLength 196 is a closed-loop position/length controller used in cut-to-length and material feed applications. This unit typically interfaces with an AC or DC variable speed drive. Compared to traditional preset counter and PLC systems, the Microlength 196 offers increased accuracy and reduced cycle times. |  | MicroSpeed 196 Controller
The MicroSpeed 196 is a closed-loop velocity controller designed for use with AC and DC vairable speed drives of any horsepower. The Microspeed 196 can be used as a stand alone controller regulating a single motor to .01% , or as a follower in more complex multi-motor systems. |  | MS320 Closed Loop Motor Speed Controller
The MS320 is a cost-effective way to add digital PID velocity control to a master/follower variable speed drive system by monitoring a signal emanating from a feedback sensor "Digital or Analog" on a machine and fine-tuning the speed reference. |  | MS332 Synchronous Controller
A fully-digital, bi-directional event synchronizer with electronic gearing/lineshaft functions for use with AC and DC variable speed drives. For advanced motor control solutions requiring precise control of speed and angular position with no gain or loss of shaft revolutions. |
| Encoders - Magnetic Encoders | |  | ED-18 Magnetic Encoder
The ED-18 Series magnetic encoder can be used as either a rotational feedback sensor or as a human machine interface (HMI) device. As a light duty feedback sensor it can provide rotation speed, direction or positioning information. The analog output provides absolute angular position information even when power is cycled on and off. As an HMI device it can be used as a rotary input control for use on instrumentation panels. |  | ED-19 Magnetic Encoder
The ED-19 Series magnetic encoder is designed for medium duty feedback applications. Resolutions are available from 64 to 1024 counts per revolution. The magnetic technology used in the ED-19 series is plug-in compatible with existing encoder products, with the added advantages of an extended temperature range and fully sealed electronics. The ED-19 suffers no LED degradation, meaning it has a virtually unlimited life. |  | ED-20 Magnetic Encoder
The ED-20 Series magnetic encoder is designed for medium duty industrial feedback applications with ball bearing supported shaft. Resolutions are available from 200 to 1024 counts per revolution. This encoder series also features line drivers with active termination for long cable runs and reverse voltage protection. The ED-20 also offers the option of high voltage differential, low voltage differential or open collector (NPN) outputs. |  | ED-21 Magnetic Encoder
The ED-21 Series magnetic encoder is designed to replace traditional mechanical potentiometers. This product is offered with a ball bearing supported shaft. Five standard output ranges are available: 0.5 - 4.5v, 0 - 5v, 0 - 12v, 4 - 20mA and 0 - 20mA. The magnetic technology used in the ED-21 offers advantages over conventional electromechanical potentiometers with sealed electronics, extended temperature ranges, and virtually unlimited life. |  | ED-22 Magnetic Encoder
The ED-22 Series magnetic potentiometer can be used to replace a conventional potentiometer. This product offers 270 degrees of electrical travel, integrated rotational stop system, 300 degrees of mechanical travel, utilizing a sleeve bearing and shaft fitted with an O-ring seal. The non-contact magnetic sensor design utilized in the ED-22 is well suited for industrial applications with temperature extremes, high vibration and shock, and contamination. | | Encoders - Optical Encoders | |  | 380 Quad Rotary Shaft Encoder
Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals. |  | 380 Std Rotary Shaft Encoder
Model 380 Std Encoder is a standard industrial grade encoder available with single channel output - 50% duty cycle square wave output signal in either direction of rotation. |  | 470 Heavy Duty Encoder
Model 470 Encoder has a size 25 heavy-duty industrial housing with rugged sealed ball bearings and an anti-backlash flexible shaft coupling to isolate the internal high precision encoder from both axial and radial shaft loading. It supplies a quadrature output with an index pulse, and optional line driver output. |  | 567 & 569 Singleturn Hollow Shaft Absolute Encoders
The 567 and 569 encoders are rugged units intended for harsh environments. These encoders feature a 10 bit parallel gray output. |  | 670 & 671 (Analog) Ruggedized Shaft Absolute Encoders
The 670 & 671 (Analog) are ruggedized shaft absolute encoders that provides an analog output of 0-20 mA or 4-20 mA. |  | 670 & 671 (Parallel) Absolute Singleturn Encoders
The 670 & 671 (parallel) are ruggedized shaft absolute encoders that provides an parallel output. |  | 670 & 671 (Serial) Absolute Singleturn Encoder
The 670 & 671 (serial) are ruggedized shaft absolute encoders that provides an serial output. |  | 803 Heavy Duty Hollow Shaft Incremental Encoder
The model 803 is a hollow shaft encoder that features an extremely robust housing for harsh environments. |  | 850 Heavy Duty Shaft Incremental Encoder
The model 850 is a heavy duty incremental encoder that features a Ø 11 mm shaft with key nut. |  | 861 (Commutation) Heavy Duty Hollow Shaft Incremental Encoder
The model 841 is a heavy duty hollow shaft encoder that features commutation outputs. Built for harsh industrial environments. |  | 861 Heavy Duty Hollow Shaft Incremental Encoder
The model 861 is a hollow shaft encoder that features an extremely robust housing for harsh environments. |  | 862 Heavy Duty Hollow Shaft Incremental Encoder
The model 862 is a hollow shaft encoder that features an extremely robust housing for harsh environments. Also features electrical insulation up to 2.5kV. |  | 865 Double Heavy Duty Hollow Shaft Incremental Encoder
The model 865 is a hollow shaft encoder that features two galvanically separated encoders in one extremely robust housing. |  | MSI 303 Miniature Shaft Incremental Encoder
The MSI 303 encoder is a miniature unit intended for demanding industrial applications. With a 30 mm diameter, it has been designed for installation in applications where space is at a premium. |  | RHA 507 (BiLL) Ruggedized Hollow Shaft Absolute Encoder
The RHA 507 (BiLL) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit BiLL RS485 output, suitable for positioning applications, printing machines, and packaging machines. |  | RHA 507 (CANopen) Ruggedized Hollow Shaft Absolute Encoder
The RHA 507 (CANopen) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit CANopen output, suitable for positioning applications, printing machines, and packaging machines. |  | RHA 507 (Parallel) Ruggedized Hollow Shaft Absolute Encoder
The RHA 507 (Parallel) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit parallel output, suitable for positioning applications, printing machines, and packaging machines. |  | RHA 507 (SSI) Ruggedized Hollow Shaft Absolute Encoder
The RHA 507 (SSI) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit SSI output, suitable for positioning applications, printing machines, and packaging machines. |  | RHA 607 & 608 (CANopen) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (CANopen) encoders have a robust enclosure for harsh environments. They features a CANopen output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (DeviceNet) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (DeviceNet) encoders have a robust enclosure for harsh environments. They features a DeviceNet output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (Profibus) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (Profibus) encoders have a robust enclosure for harsh environments. They features a Profibus output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (PROFINET) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (PROFINET) encoders have a robust enclosure for harsh environments. They features a PROFINET output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (SSI EnDat) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (SSI/EnDat) encoders have a robust enclosure for harsh environments. They features a 13 or 25 bit SSI or EnDat output. Suitable for positioning applications, printing machines, and packaging machines. |  | RHI 503 Ruggedized Hollow Shaft Incremental Encoder
The RHI 503 encoder is a rugged unit intended for demanding industrial applications. |  | RHI 504 Ruggedized Hollow Shaft Incremental Encoder
The RHI 504 encoder is a rugged unit intended for demanding industrial applications where high temperature operation is required. |  | RSA 507 (BiLL) Ruggedized Shaft Absolute Encoder
The RSA 507 (BiLL) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit BiLL RS485 output, suitable for positioning applications, printing machines, and packaging machines. |  | RSA 507 (CANopen) Ruggedized Shaft Absolute Encoder
The RSA 507 (CANopen) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit CANopen output, suitable for positioning applications, printing machines, and packaging machines. |  | RSA 507 (Parallel) Ruggedized Shaft Absolute Encoder
The RSA 507 (Parallel) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit parallel output, suitable for positioning applications, printing machines, and packaging machines. |  | RSA 507 (SSI) Ruggedized Shaft Absolute Encoder
The RSA 507 (SSI) encoder is a rugged unit intended for demanding industrial applications. Features a 13 bit SSI output, suitable for positioning applications, printing machines, and packaging machines. |  | RSA 607 & 608 (CANopen) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (CANopen) encoders have a robust enclosure for harsh environments. They features a CANopen output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (DeviceNet) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (DeviceNet) encoders have a robust enclosure for harsh environments. They features a DeviceNet output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (Profibus) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (Profibus) encoders have a robust enclosure for harsh environments. They features a Profibus output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (PROFINET) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (PROFINET) encoders have a robust enclosure for harsh environments. They features a PROFINET output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (SSI EnDat) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (SSI/EnDat) encoders have a robust enclosure for harsh environments. They features a 13 or 25 bit SSI or EnDat output. Suitable for positioning applications, printing machines, and packaging machines. |  | RSD 525 Ruggedized Shaft Dual Encoder
The RSD 525 encoder is a rugged unit intended for demanding industrial applications, specifically for safety applications where redundant feedback is required. |  | RSI 501 Ruggedized Shaft Incremental Encoder
The RSI 501 encoder is a unit with an extra rugged design, intended for harsh environments. |  | RSI 503 Ruggedized Shaft Incremental Encoder
The RSI 503 encoder is a rugged unit intended for demanding industrial applications. |  | RSI 504 Ruggedized Shaft Incremental Encoder
The RHI 504 encoder is a rugged unit intended for demanding industrial applications where high temperature operation is required. |  | RSI 505 Ruggedized Shaft Incremental Encoder
The RSI 505 encoder is a rugged unit intended for demanding industrial applications. Features imperial measurements 2,5" flanges and 3/8" shaft. |  | RSI 593 Ruggedized Shaft Incremental Encoder
The RSI 593 encoder is a rugged unit intended for demanding industrial applications. Features electrical interfaces: Current Limited Source and PTC Protected Source. |
 | HTM2500 Humidity and Temperature Sensor
HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc. |
 | VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load. |  | VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance. |  | VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |  | VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |
 | JC Handles: Ergonomic Handles for JC Joysticks
The Penny & Giles JC300, JC400, JC150, JC600, JC2000 and JC6000 range of single and multi-axis joystick controllers have a number of ergonomic handle designed to suit different functions. |  | JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options. |  | JC400 Multi-Axis Fingertip Joystick
Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip control with sequential detent feel. |
| Linear Position Sensors - Hall Effect | |  | SLH100 Hall Effect Contactless Linear Sensor
Designed to provide precision cost effective position sensing using the proven contactless Hall effect principle. The sensing system has two parts; sensor and magnetic activator. | | Linear Position Sensors - In-Cylinder | |  | ICT050 Contactless In-Cylinder Linear Transducer
With a body diameter of only 5.4mm the ICT050 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT050 has a working life which is almost limitless. |  | ICT100 Contactless In-Cylinder Linear Transducer
With a body diameter of only 10.1mm the ICT100 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT100 has a working life which is almost limitless. | | Linear Position Sensors - Inductive | |  | SLT190 Contactless Linear Position Transducer
Designed to provide reliable, fit-and-forget position sensing (up to 500mm) within a compact transducer size for the most arduous operating environments. | | Linear Position Sensors - LVDT | |  | GCA Gauge Head
GCA Series gage head with stainless steel construction enables the performs in environments containing moisture, dirt and other contaminants. Electronic components are hermetically sealed for added protection against hostile conditions. These are heavy duty, long stroke units with ranges up to ±2.0" (50mm). Maximum spring force is typically 8 oz (226.8g), dependent upon probe position. |  | GCD Gauge Head
GCD Series gauge head with stainless steel construction enables the performs in environments containing moisture, dirt and other contaminants. Electronic components are hermetically sealed for added protection against hostile conditions. These are heavy duty, long stroke units with ranges up to ±2.0" (50mm). Maximum spring force is typically 8 oz (226.8g), dependent upon probe position. |  | GCD-SE Gauge Head
The GCD-SE Series is available in five uni-polar measurement ranges, with standard strokes from 0 to 0.1 inch to 0 to 2.0 inches. Operating on a single ended 8.5 to 28.0 volt dc. input, and minimal current draw, the GCD-SE is ideally suited to portable measurement applications. Hermetically sealed, the GCD-SE is also well suited to in-process wet grinding and machining applications. |  | HCT-IS Intrinsically Safe LVDT Transmitter
The HCT is a breakthrough position transmitter for use in hazardous locations. The two-wire loop configuration allows use with a single barrier and a minimum of wire or cable. True hermetic packaging of the coil assembly and electronics provides the maximum protection against adverse environments. |  | MP LVDT
The MP Series of LVDTs is suitable for heavy industrial use. Its coils are encapsulated in an anodized extruded aluminum housing, providing protection against electromagnetic and electrostatic interference. A heavy-duty terminal barrier strip replaces lead wires. A Teflon boreliner is standard equipment. |  | PTS-420 Position Transmitter System
The PTS 420 linear position transmitter consists of a one-piece linear position sensor and transmitter electronics. Configured for use in two-wire, current loops, the PTS 420 is compatible with most process controllers. Units are available in measurement ranges from 0.25" to 10". | | Linear Position Sensors - Magnetic Encoder | |  | ED-30 Magnetic Encoder
The ED-30 series incremental linear position sensors are designed for demanding OEM applications requiring low cost linear position feedback. The ED-30 series sensor provides resolutions from 0.08mm down to 0.02mm. Designed to operate in manufacturing environments, the sensor is unaffected by dust, dirt, oil and changing ambient light conditions. | | Linear Position Sensors - Potentiometers | |  | HLP190 Spring Loaded Linear Potentiometer
The HLP190 linear potentiometers has a body diameter of only 19mm with stroke lengths from 25mm to 150mm, and a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position. |  | SLS095 Linear Potentiometer
The SLS095 comes in an extremely compact, lightweight package in stroke lengths from 10 to 100mm. The miniature size of this new sensor makes it ideal for applications in robotics, animatronics, medical equipment and motorsport data acquisition. |  | SLS130 Linear Potentiometer
The SLS130 comes in an extremely compact, lightweight package in stroke lengths from 25 to 200mm. It is ideally suited to high volume OEM manufacturers, where high performance and reliability has paramount importance. |  | SLS190 Linear Potentiometer
The SLS190 is available in stroke lengths from 25 to 350mm. Using the proven benefits of Hybrid Track Technology, the SLS190 is ideally suited to high volume OEM manufacturers. |  | SLS220 Spring Loaded Linear Potentiometer
The SLS220 is available in stroke lengths of 10 and 20mm, with a spring loaded operating shaft. This unit has a mounting flange to allow easy installation. |  | SLS320 Linear Potentiometer
The SLS320 is available in stroke lengths from 250 to 1600mm in a compact, with a lightweight, easy to use design. This unit is ideally suited to high volume OEM manufacturers. | | Linear Position Sensors - Slide Gate Position | |  | SG1000B Linear Position Monitor
Housed in a rugged NEMA 4 enclosure, the SG1000B is typically used to measure the linear position of a process that has a repetitive linear movement, providing independent and accurate feedback via a 4-20mA signal. | | Linear Position Sensors - String (Draw Wire) Potentiometers | |  | P-series Position Transducer
AMETEK RayelcoTM Position Transducers offer precise monitoring of a traveling element from 0-2" through 0-2000". Accuracy is maintained on both extension and retraction, and the potentiometer can be excited with either AC or DC voltage up to 25 volts. Twenty seven (27) available models cover ranges of 0-2" through 0-2000". |  | PT-series Position Transmitter
These Position Transmitters combine the high accuracy of AMETEK RayelcoTM Position Transducers with a 4-20 mA electronic package, providing a two-wire, 4-20 mA transmitter which consistently delivers accuracy of +0.1% FS*. Ranges available up to 2000 inches. | | Linear Position Sensors - Ultrasonic Modules and Systems | |  | M300 Low Cost Liquid Level Sensor
The Massa Model M-300/150 Sensor measures target distances over a range of 4 inches (100 mm) to 8 feet (2.5 meters). |  | M5000 Ultrasonic Displacement Transducer
The MassaSonic™ M-5000/220 Smart Ultrasonic Sensor incorporates state-of-the-art ultrasonic and microprocessor technology to provide precision non-contact distance measurement for factory automation or industrial process control. The M-5000/220 stands out over all other systems because of its extraordinary ease of operation, genuinely
user-friendly software, versatility in user-controlled outputs, and the ability to be set up without using a target. |
| Load Cells / Force Transducers - Column / Rod End | |  | WMC Rod End Load Cell
The WMC rod end load cell is a tension & compression load cell with male threads on the top and bottom. Available in capacities from 20K lbf. to 50K lbf. | | Load Cells / Force Transducers - Load / Force Washers | |  | ELWF Load Washer
The ELWF is a compression load washer typically used in bolt loads, assembly forces, biomechanical force measurement, tool forces, thrust measurements, and robotics end effectors. Available in capacities from 5 lbf. to 2K lbf. |  | LW Load Washer Load Cell
The LW is a load washer or through hole load cell typically used for measuring tension on fasteners. Available in capacities from 5 lbf. to 100K lbf. | | Load Cells / Force Transducers - Load Buttons | |  | C9B Compression Force Transducer
The C9B force transducer is suitable for measuring static or dynamic compressive forces. The sensor is designed for applications where space is at a premium. Ranges are available from 50N to 50kN. |  | ELAF Compression Load Cell
The ELAF is a compression-only load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, material test, and hoist and winch loads. Available in capacities from 10 lbf. to 5K lbf. |  | LBS Miniature Compression Load Button
The LBS is a smaller less accurate version of the LBM. It is a compression only load button designed for very small spaces. Available in capacities from 5 lbf. to 1K lbf. |  | MSC Small Diameter High Capacity Load Button
The MSC is a very small compression only high capacity load button. Available in capacities from 15K lbf. to 30K lbf. | | Load Cells / Force Transducers - Low Profile Load Cells | |  | 1101 Ultra Precision Compression-Only Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities of 1K lbf. to 50K lbf. |  | 1200 Standard 3-Wire Amplified Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. With the electronics built into the load cell, there is no need for a separate signal conditioner. Available in capacities of 300 lbf. to 100K lbf. |  | 1200 Standard Load Cell
Higher output than most competitive load cells. For static, general purpose applications requiring a load cell compensated for eccentric loads. Comes in capacities of 300 lbf. to 100K lbf. |  | 1201 Standard Compression-Only Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. Available in capacities of 1K lbf. to 400K lbf. |  | 2400 Standard Stainless Steel Load Cell
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities from 100 lbf. to 5K lbf. |  | 2400 Standard Stainless Steel Load Cell (10K lbf & 20K lbf)
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 10K lbf. and 20K lbf. |  | 2404 Standard Stainless Steel 2-Wire Amplified Load Cell
The 2404 is an amplified version of 2400 which gives mA output. It is still a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 50 lbf. to 5K lbf. |  | 2451-2461 Stainless Steel Compression-Only Load Cell
Interface has developed the new compact compression only 2451/2461 for applications requiring a very small footprint. The 2451 comes in 3 capacities, 50, 75, and 100K, each only 4.5” in diameter. The 2461 comes in 2 capacities, 150 and 200K, each only 5.5” in diameter. |  | 3200 Standard Stainless Steel Load Cell
The 3200 has all the features of the Interface Model 1200 Low Profile only is stainless steel and hermetically sealed for harsh applications. Available in capacities from 2.5K lbf. to 100K lbf. | | Load Cells / Force Transducers - Miniature | | | ELAF Compression Load Cell
The ELAF is a compression-only load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, material test, and hoist and winch loads. Available in capacities from 10 lbf. to 5K lbf. |  | ELPF Load Cell
The ELPF is a compression or tension & compression load cell typically used for theatrical rigging loads, assembly forces, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, medical instruments, and hoist and winch loads. Available in capacities from 10 lbf. to 500 lbf. | | LBS Miniature Compression Load Button
The LBS is a smaller less accurate version of the LBM. It is a compression only load button designed for very small spaces. Available in capacities from 5 lbf. to 1K lbf. | | MSC Small Diameter High Capacity Load Button
The MSC is a very small compression only high capacity load button. Available in capacities from 15K lbf. to 30K lbf. |  | SMA Minature S-Type Load Cell
The SMC is miniature version of SM where height is a constraint. Available in capacities from 15 lbf. to 200 lbf. |  | SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |  | U2B Force Transducer
The U2B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive loads. Loading is applied utilizing the integral mounting studs. Ranges are available from 0.5kN to 200kN. |  | U9B Force Transducer
The U9B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive forces. It is designed for assembly and production applications where space is at a premium. Ranges are available from 50N to 50kN. |  | WMC Miniature Sealed Stainless Steel Load Cell (1K-10K lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 1K lbf. to 10K lbf. |  | WMC Miniature Sealed Stainless Steel Load Cell (5-500 lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 5 lbf. to 500 lbf. | | Load Cells / Force Transducers - OEM | |  | FC23 Compression Load Cell
The FC22 is a compression load cell that can measure ranges from 0 - 250 up to 0 - 2000 lbf. Typical applications include batch weighing, robotics end-effectors, variable force control, load and compression sensing, assembly line force measurement, pumps, hoist and winch loads, and weighing. | | Load Cells / Force Transducers - Piezoelectric | |  | PACEline Piezoelectric Force Transducers (overview)
Your fitting and assembly processes are fast and space is a constraint. But you still expect consistently reliable quality control for your production. It’s time for PACEline. Compact and highly dynamic force measurement technology from HBM that makes the difference – and brings fresh impulses to piezo technology. |  | PACEline CFT Piezoelectric Force Transducer
CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic press-fit and assembly processes with fast force variations. |  | PACEline CFW Piezoelectric Force Washer
Thanks to their compact design CFW force washers can be used in many different applications, including adverse industrial environments. Presently available with nominal (rated) forces of 50 kN and 140 kN. Since the output signal is not dependent on the measuring range but on the force applied, CFW force sensors withstand very high overloads. |  | PACEline CMA Charge Amplifier
The PACEline CMA charge amplifier (analog amplifier) ensures reliable transmission of data from piezoelectric force transducers. This is done by signal conditioning to +/-10 V analog standard signals. |  | PACEline CMC - The piezoelectric force measurement chain
CFT piezoelectric force transducers and CMA analog amplifiers are combined to form a calibrated unit. Even with the most challenging task in your process monitoring: The CMC measurement chain keeps pace at any time. |  | PACEline CMD Digital Charge Amplifier
The digital charge amplifier for piezoelectric sensors assures multiple uses in many applications in the laboratory and production. The CMD600 measures very fast force, torque and pressure signals at frequencies of up to 30 kHz and can be used with piezoelectric sensors up to max. 600,000 pC (Pico coulombs). | | Load Cells / Force Transducers - S-Type | | | SMA Minature S-Type Load Cell
The SMC is miniature version of SM where height is a constraint. Available in capacities from 15 lbf. to 200 lbf. | | SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |  | SSM Sealed S-Type Load Cell
The SSM is a sealed version of SM. Available in capacities of 50 lbf. to 5K lbf. |
| Pressure Sensors & Transmitters - Pressure Sensor Elements (Headers) | |  | 87N UltraStable Pressure Sensor
The Model 87N UltraStable™ is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 87N UltraStable™ is offered in a weldable package or with a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as well as custom process fittings. Available in 0 - 1000 up to 0 - 5000 PSI ranges, in absolute and sealed gage versions. |  | 89C UltraStable Pressure Sensor
The Model 89 UltraStable™ (compensated) is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 89 UltraStable™ features 5/16-32 UNEF threads and can be welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP. Available in 0 - 1000 up to 0 - 5000 PSI ranges, in absolute and sealed gage versions. |  | 89CV UltraStable Pressure Sensor
The Model 89 UltraStable™ (constant voltage) is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 89 UltraStable™ features 5/16-32 UNEF threads and can be welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP. Available in 0 - 1000 up to 0 - 5000 PSI ranges, in absolute and sealed gage versions. |  | 89U UltraStable Pressure Sensor
The Model 89 UltraStable™ (uncompensated) is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 89 UltraStable™ features 5/16-32 UNEF threads and can be welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP. Available in 0 - 1000 up to 0 - 5000 PSI ranges, in absolute and sealed gage versions. |  | DP86 Differential Pressure Sensor
The DP86 differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The DP86 is designed for O-ring mounting. Available in ranges from 0 - 1 up to 0 - 500 PSID. | | Pressure Sensors & Transmitters - Pressure Transducers | |  | M5100 MicroFused Pressure Transducer
The M5100 sets the price / performance standard for transducers used in demanding environments. The pressure port is machined from a solid piece of 17-4PH stainless steel. There are no O-rings, organics or welds exposed to the pressure media. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |  | MSP300 MicroFused Pressure Transducer
The MSP300 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. It is geared to the OEM customer using medium to high volumes. Available in ranges from 0 - 100 up to 0 - 10,000 PSIG. |  | MSP340 MicroFused Pressure Transducer
The MSP340 is similar to the MSP300, but features a smaller body diameter. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |
| Rotary Position Sensors - Hall Effect | |  | SRH220DR Contactless Rotary Sensor
SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur. It is housed in an all-new moulded housing with separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected. |  | SRH280P & SRH280DP Contactless Rotary Position Sensor
For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68. |  | TPS280DP Throttle Position Sensor
TPS280DP is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centers and is designed to interface with most common throttle body D type spindles. The sensor has a choice of 200 or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the FDR-25 sheathed spec 55A cable. With sealing to IP69K, it is also able to withstand high pressure wash-downs. | | Rotary Position Sensors - Inductive | |  | RSYN Rotary Position Sensor
RSYN angular position sensors are non-contact transducers that incorporate proprietary rotor and coil designs.The linear AC output represents the rotor shaft angle position providing the user with exceptional resolution even over very small angular ranges. | | Rotary Position Sensors - Magnetic Encoder | | | ED-18 Magnetic Encoder
The ED-18 Series magnetic encoder can be used as either a rotational feedback sensor or as a human machine interface (HMI) device. As a light duty feedback sensor it can provide rotation speed, direction or positioning information. The analog output provides absolute angular position information even when power is cycled on and off. As an HMI device it can be used as a rotary input control for use on instrumentation panels. | | ED-19 Magnetic Encoder
The ED-19 Series magnetic encoder is designed for medium duty feedback applications. Resolutions are available from 64 to 1024 counts per revolution. The magnetic technology used in the ED-19 series is plug-in compatible with existing encoder products, with the added advantages of an extended temperature range and fully sealed electronics. The ED-19 suffers no LED degradation, meaning it has a virtually unlimited life. | | ED-20 Magnetic Encoder
The ED-20 Series magnetic encoder is designed for medium duty industrial feedback applications with ball bearing supported shaft. Resolutions are available from 200 to 1024 counts per revolution. This encoder series also features line drivers with active termination for long cable runs and reverse voltage protection. The ED-20 also offers the option of high voltage differential, low voltage differential or open collector (NPN) outputs. | | ED-21 Magnetic Encoder
The ED-21 Series magnetic encoder is designed to replace traditional mechanical potentiometers. This product is offered with a ball bearing supported shaft. Five standard output ranges are available: 0.5 - 4.5v, 0 - 5v, 0 - 12v, 4 - 20mA and 0 - 20mA. The magnetic technology used in the ED-21 offers advantages over conventional electromechanical potentiometers with sealed electronics, extended temperature ranges, and virtually unlimited life. | | ED-22 Magnetic Encoder
The ED-22 Series magnetic potentiometer can be used to replace a conventional potentiometer. This product offers 270 degrees of electrical travel, integrated rotational stop system, 300 degrees of mechanical travel, utilizing a sleeve bearing and shaft fitted with an O-ring seal. The non-contact magnetic sensor design utilized in the ED-22 is well suited for industrial applications with temperature extremes, high vibration and shock, and contamination. | | Rotary Position Sensors - Slide Gate Position | |  | SG1000A Slide Gate Monitor
Electro-Sensors SG1000A Slide Gate Monitor is a complete monitoring system housed in a compact and rugged explosionproof enclosure. It provides independent, accurate feedback of slide gate position to a controller (PLC) or Electro-Sensors’ optional remote slide gate display. |  | SG1000C Rotary Position Monitor
Housed in a compact and rugged explosionproof NEMA 4 enclosure, the SG1000C is an encoder-based position sensor providing a 4-20 mA output and is used to measure processes that have a repetitive single turn clockwise or counter clockwise rotary movement. |  | SG1000D Valve-Damper Position Monitor
Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. For processes having a full-scale sweep from 15 to 359 degrees. |  | SG1000E Sub-Turn Shaft Monitor
Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. For processes having a full-scale sweep from 5.6 to 130 degrees. |
 | 500 In-Line Signal Conditioner
Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth. |  | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |  | DF30CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. |  | DF30DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. |  | DF31CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | digiCLIP Digital Amplifier (overview)
digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available. |  | DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration. |  | EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user. |  | INF-USB Universal Serial Bus Output Module
The INF-USB module allows measurements from load cells, torque sensors, or other sensors to be acquired by USB. System also includes graphing and logging software. |  | LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors. |  | MP60 Single Channel PME Amplifier
Single channel module for incremental transducers. |  | MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface. |  | PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories. |  | SCM100 Signal Conditioner
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals. |  | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. |  | SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors. |  | UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation. | | Signal Conditioning - Distributed IO | |  | ioPro Distributed IO
The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved performance. | | Signal Conditioning - Wireless | |  | EtherWave™ WE
The EtherWave WER allows you to build your own long-range, non-line-of-sight, point-to-point, or point-to
multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, IP Cameras, VoIP phones, digital signage, or access control / security systems. The EtherWave WER
offers the ideal combination of price, range, data rate, security, interference avoidance, quality-of-service, and
ease-of-use. |  | EtherWave™ WEB-900
The EtherWave WEB replaces costly wiring with a wireless Ethernet bridge that can enable remote Wi-Fi APs, Ethernet
pan/tilt/zoom security cameras, VoIP phones, or Internet kiosks. ioSelect’s product offers the ideal combination
of price, range, data rate, security, interference avoidance, quality-of-service, and ease-of-use. |  | EtherWave™ WER-900
The EtherWave WER allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | EtherWave™ WMR-900
The EtherWave WMR allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | ioPro™ WDL
The Wireless Data Link (WDL) adds seamless wireless capabilities to the ioPro Series. The WDL supports all the
ioPro operating modes, and more. With its industry leading 125Kbps over air data rate it can be used as a "Radio
Modem" for other demanding wireless serial applications. With its powerful radio (Up to 1 Watt) and high receiver
sensitivity the WDL can communicate effectively over long distances (up to 20 Miles with clear line of site), and has
the power to penetrate walls and other obstacles in shorter runs. |  | ReFlexIO™ Industrial Wireless Cable Replacement System
If you need to control or monitor a device or system at a distance, the ReFlexIO is the solution. It comes complete with 8 x onboard I/O that allow you to connect to almost any device. Use it monitor or control pumps, valves, PLC’s, dataloggers, rain gauges, tank levels, security systems, fire & evac systems, access control, irrigation systems, flow meters, emergency standby systems and more. | | Wireless Accessories
A complete set of accessories for creating a reliable and high performance wireless system. |
| Software - Measurement Software | |  | Catman Easy Software
With catman®Easy you can perform a large number of different measurement tasks quickly and simply... without wasting time or effort on programming. Thanks to the optimal interaction between hardware and software, you can configure your amplifier much faster. You can also quickly define your measurement parameters such as sampling rates, trigger settings, as well as select your preferred visualization mode. |  | Perception Software - advanced exports
For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular programs. Extensive built-in set-up options let you export the data of interest the way you want, and nothing more. In addition, these exports can be combined with the powerful automation and post processing features included as standard in Perception. |  | Perception Software - analysis
Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The formula results can be re-used in other formulas to get even more advanced answers. |  | Perception Software - basic FFT
The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore the user can obtain valuable information about the content of mixed signals like vibrations, shocks or noisy signals beyond what is visible in a time domain display. |  | Perception Software - HPHV automated analysis
The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate
reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately and in an automated manner. |
| Speed Measurement - Counters | | | AC-D-4M Large Display Event Counter
The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures. | | CT6000 Process Counter
The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application. | | Speed Measurement - DeviceNET SpeedTalker | |  | SpeedTalker-DN (UI) DeviceNet Shaft Speed Monitor
Electro-Sensors' SpeedTalker-DN (UI) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet. | | Speed Measurement - E-Z Mount Brackets & Disc Guards | |  | EZ-100 Easy Mount Bracket Assembly
The EZ-100 allows a Speed Switch or Speed Sensor to be mounted to a rotating shaft without the need of any additional brackets or hardware. |  | EZ-SCP Easy Mount Bracket Assembly
The EZ-SCP allows an SCP-Series Switch to be mounted to the end of a shaft without the need for any additional brackets or hardware. |  | Stainless Steel Disc Guards
Stainless Steel Disc Guards protect your critical disc and sensor or switch from from impact or shock damage. Disc-Guards also help minimize the effects of dust, dirt, grease, and grime. | | Speed Measurement - Encoders | | | 380 Quad Rotary Shaft Encoder
Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals. | | 380 Std Rotary Shaft Encoder
Model 380 Std Encoder is a standard industrial grade encoder available with single channel output - 50% duty cycle square wave output signal in either direction of rotation. | | 470 Heavy Duty Encoder
Model 470 Encoder has a size 25 heavy-duty industrial housing with rugged sealed ball bearings and an anti-backlash flexible shaft coupling to isolate the internal high precision encoder from both axial and radial shaft loading. It supplies a quadrature output with an index pulse, and optional line driver output. | | Speed Measurement - Pulser Discs & Magnet Wheels | |  | 198EM Magnet Wheel
The 60 Pole Pair Magnet Wheel is an end mount, ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. |  | 199SM Magnet Wheel
The 60 Pole Pair Magnet Wheel is a shaft mount, ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. |  | 232 Pulser Disc
Model 232 is a 4" PVC disc with 32 face-mounted magnets. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | 255 Pulser Disc
Model 255 is a 4" Nylon Pulser Disc with 16 face mounted magnets. The 255 Pulser Disc is the standard disc for most Electro-Sensors systems. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | 256 Pulser Disc
Model 256 is a 2.5" PVC disc with 8 face-mounted magnets. The 256 is standard with M5000 speed switch systems. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | 257 Pulser Disc
Model 257 is an 8" PVC disc with 32 face-mounted magnets. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | PD225 Pulser Disc
PD225 PVC Pulser Discs are 2.75" diameter discs with 20 face-mounted magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall-Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | PD455 Pulser Disc
PD455 PVC Pulser Discs are 4.75" in diameter and have 20 face-mount magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | PD725 Pulser Disc
PD725 Aluminum Pulser Discs are 7.5" in diameter and have 60 face-mount magnets. They are constructed of aluminum and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. |  | PDE450 Pulser Disc
PDE450 PVC Pulser Discs are 4" in diameter and have 20 edge-mount magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft. | | Speed Measurement - Pulser Wraps | |  | High Speed Pulser Wraps
High Speed Pulser Wraps are aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 2". |  | Miniature Pulser Wraps
Miniature Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.25" wide and have a minimum outside diameter of 4". |  | Narrow Pulser Wraps
Narrow Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. Narrow Wraps are 0.625" wide and have a minimum outside diameter of 7". |  | Slotted Pulser Wraps
Slotted Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 7". |  | Standard Pulser Wraps
Standard Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 4". | | Speed Measurement - Reverse Rotation Detectors | |  | TR400 Speed & Direction Indicator
The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and accurately. The ability to accurately detect and convert 0.01 to 10,000 Hz signal input makes the TR400 an inexpensive solution to many industrial applications. With the addition of optional relay outputs and/or 4-20 mA analog output, the TR400 becomes a complete process control and display system. |  | UDS1000 Reverse Rotation Detector
The UDS1000 Reverse Rotation Detector is a complete system, designed to detect shaft reversal. Standard system includes UDS1000, 906B Sensor and 255 Pulser Disc. | | Speed Measurement - Ring Kits | |  | DRK 143TC Digital Ring Kits
DRK 143TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 143TC, 145TC, 182C & 184C; 7/8" Bore. Standard DRK 143TC Ring Kit Comprises: 143TC Aluminum Ring, 7/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR). |  | DRK 182TC Digital Ring Kits
Electro-Sensors DRK 182TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 182TC, 184TC, 213C, 215C & 254C; 1-1/8" Bore. Standard DRK 182TC Ring Kit Comprises: 182TC Aluminum Ring, 1-1/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR). |  | DRK 213TC Digital Ring Kits
Electro-Sensors DRK 213TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 213TC, 215TC, 254UC & 256UC; 1-3/8" Bore. Standard DRK 213TC Ring Kit Comprises: 213TC Aluminum Ring, 1-3/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR). |  | DRK 254TC Digital Ring Kits
Electro-Sensors DRK 254TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 254TC & 256TC; 1-5/8" Bore. Standard DRK 254TC Ring Kit Comprises: 254TC Aluminum Ring, 1-5/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR). |  | DRK 56C Digital Ring Kits
Electro-Sensors DRK 56C Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame 56C: 5/8" Bore. Standard DRK 56C Ring Kit Comprises: 56C Aluminum Ring, 5/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR). |  | QDRK 143TC Quadrature Ring Kit
The QDRK 143TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 143TC, 145TC, 182C & 184C; 7/8" Bore. Standard QDRK 143TC Ring Kit Comprises: 143TC Aluminum Ring, 7/8" Magnet Wheel, 1201 Quadrature Hall Effect Sensor (60PPR). |  | QDRK 182TC Quadrature Ring Kit
The QDRK 182TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 182TC, 184TC, 213C, 215C & 254C; 1-1/8" Bore. Standard QDRK 182TC Ring Kit Comprises: 182TC Aluminum Ring, 1-1/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR). |  | QDRK 213TC Quadrature Ring Kit
The QDRK 213TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 213TC, 215TC, 254UC & 256UC; 1-3/8" Bore. Standard QDRK 213TC Ring Kit Comprises: 213TC Aluminum Ring, 1-3/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR). |  | QDRK 254TC Quadrature Ring Kit
The QDRK 254TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 254TC & 256TC; 1-5/8" Bore. Standard QDRK 254TC Ring Kit Comprises: 254TC Aluminum Ring, 1-5/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR). |  | QDRK 56C Quadrature Ring Kit
The QDRK 56C Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 56C; 5/8" Bore. Standard QDRK 56C Ring Kit Comprises: 56C Aluminum Ring, 5/8" Magnet Wheel, 1201 Quadrature Hall Effect Sensor (60PPR). | | Speed Measurement - Sensors - Analog | |  | 916A Analog Sensor
Electro-Sensors 916A passive analog sensors are designed for use with pulse generators that provide magnetic targets, such as Electro-Sensors Pulser Discs and Split Collar Pulser Wraps. 916A sensors have a 3/4" threaded aluminum body, are supplied with a mounting bracket and jam nuts, and are recommended for use with Pulser Discs and Split Collar Pulser Wraps. |  | 917A XP Analog Sensor
917A explosionproof sensors are mounted in a rugged cast aluminum enclosure, which is CSA approved and UL rated for Class I, Group D; Class II, Groups E, F, and G, and Class III environments. 917A XP sensors are also supplied with a mounting bracket and are recommended for use with Pulser Discs and Split Collar Pulser Wraps. | | Speed Measurement - Sensors - Hall Effect | |  | 1101 Hall Effect Sensors
1101 stainless steel Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as 60 Pole Pair Magnet Wheels, Pulser Wraps, or Pulser Discs. It is the recommended Hall-effect sensor for use with Electro-Sensors NEMA C Flange Ring Kits. |  | 1102 Magnetoresistive Sensor
Electro-Sensors 1102 magneto resistive sensors are used with magnetic targets such as 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is 7/16 inch in diameter, non-threaded stainless steel, and is 2 inches in length. It is the recommended Magneto Resistive Sensor for use with Electro-Sensors NEMA C Flange Ring Kits. |  | 906 Hall Effect Sensor
The 906 standard Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. The 906 Hall-effect Sensor is the standard sensor for most Electro-Sensors systems. |  | 906B (Bi-Directional) Hall Effect Sensor
The 906B is a quadrature Hall-effect sensor is designed for applications requiring both speed and direction information. It produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It is water-proof and suitable for most applications, including environments where dirt, dust, grease, or moisture are present. |  | 907 XP (explosion-proof) Hall-effect Sensor
The 907 XP (explosion-proof) Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It is the standard EXPLOSION PROOF sensor for most Electro-Sensors systems. It has a 1-inch NPT conduit opening, and is provided with a mounting bracket. |  | 907B XP (Bi-Directional) Hall Effect Sensor
The 907B XP Hall-effect quadrature sensor is designed for applications requiring both speed and direction information. Available in either the 907BV or 907BH configuration, it produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It has an XLB-3 enclosure which is C.S.A. approved and UL rated for Class I Group D; Class II Group E, F, G; Class III. It has a 1-inch NPT conduit opening, and is provided with a mounting bracket. |  | 931 XP Miniature Hall Effect Sensor
Electro-Sensors 931 XP (explosion-proof) Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs. It is mounted in a cast aluminum enclosure which is C.S.A. approved and UL rated for Class I Groups C, D; Class II Groups E, F, and G; Class III environments. The conduit opening is 1/2 inch NPT. |  | 932 Magnetoresistive Sensor
Electro-Sensors 932 Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is 3/4 inch in diameter, with 3/4-16 UNF threads, and is 2-1/2 inches in length. It is also used in applications where only one magnet is present for counting, function start/stop, or orientation alignment of mechanical or electronic indexing equipment. |  | 933 XP Magnetoresistive Sensor
Electro-Sensors 933 XP (explosion proof) Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is mounted in a cast aluminum enclosure which is C.S.A. approved and UL rated for Class I Groups C, D; Class II Groups E,F, G; Class III environments. The conduit opening is 1/2 inch NPT. |  | HE950 Proximity Sensor
HE950 sensors monitor gear-teeth, spokes, or keyways and produce a digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners, or as a direct pulse input into PLCs. The HE950 sensor is a “one size fits all” sensor capable of operating across broad range of target sizes and offering flexible gap distance set up (up to 3mm). | | Speed Measurement - Sensors - Proximity | |  | 608 Proximity Sensor
Electro-Sensors Model 608 is an 8mm unshielded proximity sensor. It has a maximum sensing range of 0.080" and maximum switching frequency of 800 Hz. |  | 608-1 Proximity Sensor
Electro-Sensors Model 608-1 is an 8mm shielded proximity sensor. It has a maximum sensing range of 0.060" and maximum switching frequency of 2 kHz. |  | 612 Proximity Sensor
Electro-Sensors Model 612 is a 12mm unshielded proximity sensor. It has a maximum sensing range of 0.200" and maximum switching frequency of 400 Hz. |  | 612-1 Proximity Sensor
Electro-Sensors Model 612-1 is an 12mm shielded proximity sensor. It has a maximum sensing range of 0.080" and maximum switching frequency of 1.5 kHz. |  | 618 Proximity Sensor
Electro-Sensors Model 618 is an 18mm unshielded proximity sensor. It has a maximum sensing range of 0.390" and maximum switching frequency of 200 Hz. |  | 618-1 Proximity Sensor
Electro-Sensors Model 618-1 is an 18mm shielded proximity sensor. It has a maximum sensing range of 0.200" and maximum switching frequency of 600 Hz. |  | 630 Proximity Sensor
Electro-Sensors Model 630 is a 30mm unshielded proximity sensor. It has a maximum sensing range of 0.710" and maximum switching frequency of 100 Hz. |  | 630-1 Proximity Sensor
Electro-Sensors Model 630-1 is a 30mm shielded proximity sensor. It has a maximum sensing range of 0.390" and maximum switching frequency of 400 Hz. | | Speed Measurement - Shaft Speed Switches | |  | ASiSA AS-Interface Speed Alarm
Electro-Sensors’ ASiSA is an AS-Interface speed sensor with underspeed alarm designed to operate in demanding, hazardous and industrial environments. The ASiSA continuously monitors rotating shaft speed, comparing it to a trip-point setting and alarming when less than the trip-point. |  | DR1000 Digital Speed Switch
The DR1000 features precise set point capability over a broad range of speeds starting at 0.5 rpm, making it ideal for super slow speed applications. The DR1000 monitors shaft speeds, detecting shaft slowdown to within 1% of the set point. A DPDT control relay rated at 5A at 30 Vdc/l20Vac resistive, serves as the output. |  | FB420 Shaft Speed Sensor
Electro-Sensor’s FB420 is an integral part of the Electro-Sentry™ Hazard Monitoring System but is also available as a stand alone shaft speed sensor. It provides a 4-20mA signal directly proportional to the rotational speed of a monitored shaft and has a 4 digit LCD display capable of displaying from 0.000 to 9999. RPM or from 04.00 to 20.00 mA. |  | LRB-1000 Speed Switch
LRB-1000 Speed Switches are complete systems with one individually adjustable set point for monitoring a single rotating shaft. The LRB-Series System is an efficient way to continuously track proper machine RPM, and provide a relay protection upon detection of an unwanted change in speed or stoppage of the monitored shaft. |  | LRB-2000 Speed Switch
LRB-2000 Speed Switches are complete systems with two individually adjustable set points for monitoring a single rotating shaft. The LRB-Series System is an efficient way to continuously track proper machine RPM, and provide a relay protection upon detection of an unwanted change in speed or stoppage of the monitored shaft. |  | M100 & M5000 Miniature Speed Switches
M-Series Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. The M100 has a relay setpoint range of between 10RPM and 100RPM. The M5000 has a relay setpoint range of between 100RPM and 5000RPM. This range is where the relay can be set to trip - both switches have the same operating range. |  | M100T & M5000T Miniature Speed Switches
The M100T and M5000T Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. These switches have a terminal block inside the housing for easy wiring connection and installation. The M100T has a relay setpoint range of between 5RPM and 100RPM. The M5000T has a relay setpoint range of between 100RPM and 5000RPM. |  | PVC100 & PVC5000 Miniature Speed Switches
The PVC-Series of corrosion-resistant speed switches are self-contained rotation monitoring systems that are ideal for detecting the unwanted slow down or stoppage of process equipment. The PVC-Series of switches are ideal for use in fertilizer, salt, and chemical processing plants - or anywhere that there is a corrosive environment. |  | SCP1000 Presettable Speed Switch
SCP1000 Presettable Machine Speed Switches are complete systems providing one individually adjustable relay set point, while monitoring a single rotating shaft. Also features visual set point adjustment for dial in ease and accuracy of set point settings. SCP-Series Switches can be completely adjusted with the machinery at rest, there is no need to run the shaft. |  | SCP2000 Presettable Speed Switch
SCP2000 Presettable Machine Speed Switches are complete systems providing two individually adjustable relay set points, while monitoring a single rotating shaft. SCP-Series Switches can be completely adjusted with the machinery at rest, there is no need to run the shaft. |  | SpeedTalker DN-BH Devicenet Shaft Speed Sensor
Electro-Sensors SpeedTalker DN-BH is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, stainless steel enclosure, the SpeedTalker DN-BH is designed to operate in demanding industrial environments. It features a round M12 micro connector, and operates in any DeviceNet network. |  | SpeedTalker DN-XP Devicenet Shaft Speed Sensor
Electro-Sensors SpeedTalker DN-XP is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, explosion-proof enclosure, the SpeedTalker DN-XP is designed to operate in demanding, hazardous and industrial environments. It features an open style connector, and operates in any DeviceNet network. |  | SS110 Slow Speed Switch
The SS-110 Slow Speed Switch is a complete system that has one adjustable set point for monitoring a single rotating shaft. It is an efficient way to continuously track proper machine RPM, and provide a relay output upon detection of an unwanted change in speed or stoppage of the monitored shaft. |  | ST420 Shaft Tachometer Sensor
The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency (rotating shaft speed). | | Speed Measurement - Speed to Analog Signal Conditioners | |  | AIFO-200 Analog to Frequency Conversion Module
The AIFO-200 is an interface device used between an analog signal and a frequency-input device typically used in applications where a process is monitored by a transducer, PLC, PC, or some other device that provides a 0–10 Vdc or 4–20 mA signal. |  | SA420 Digital Signal Conditioner
The Electro-Sensors SA420 Signal Conditioner is a complete system which provides an analog signal directly proportional to the speed of a monitored shaft. | | ST420 Shaft Tachometer Sensor
The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency (rotating shaft speed). | | Speed Measurement - Tachometers | |  | AP1000 Digital Tachometer
The AP1000 Series Digital Tachometer is a complete rate monitoring system that combines accuracy and reliability in a rugged, compact housing. The AP1000 can take a variety of pulse inputs. The meter translates the input pulses to display RPM, or any specified user unit such as Feet Per Minute, Parts Per Hour, or Gallons Per Minute. |  | H100T Analog Tachometer
The H100T Series Analog Tachometer is a complete system capable of providing the user with a linear, visual indication of rates as low as 25 rpm full scale. The H100T utilizes the latest in solid state circuitry, has three switch selectable speed ranges, 0-50 rpm, 0-500 rpm, and 0-5000 rpm, and an accuracy of +/- 2%. |  | HH100 Hand-Held Digital Tachometer
The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and length. The HH100's rugged construction, portability and outstanding features make it an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications. | | TR400 Speed & Direction Indicator
The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and accurately. The ability to accurately detect and convert 0.01 to 10,000 Hz signal input makes the TR400 an inexpensive solution to many industrial applications. With the addition of optional relay outputs and/or 4-20 mA analog output, the TR400 becomes a complete process control and display system. |  | TR5000 Ratemeter Tachometer
The TR5000 is a Full Logic Control Process Ratemeter that can display up to three separate values of rate (from up to 2 different shafts) and compare them to programmable set points. |
| Temperature - Temperature Transmitters | |  | TT-420 Temperature Sensors
TT420 temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs. |  | TT-420-LT Temperature Sensors
TT420-LT temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs |
 | AccuStar Electronic Clinometer
The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. Designed for easy integration, with a choice of analog, ratiometric, digital or serial models, the clinometer produces an output signal corresponding to direction and magnitude of angular displacement. Features a linear range of ±45°. |  | LCI Inclinometer
The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis. |  | LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies. |  | LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series. |  | NS-P Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. They feature an aluminum baseplate and IP 65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. | | Tilt Sensors & Inclinometers - Industrial Tilt Swtches | |  | MTS-20H Standard Probe With Hanger
Electro-Sensors MTS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. It is a standard-duty steel probe with a steel hanger and 8 feet of cable attached |  | MTS-30H Heavy-Duty Probe With Hanger
Electro-Sensors MTS-30H heavy-duty probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. The MTS-30H is a heavy-duty steel probe with hanger and 8 feet of cable attached. |  | MTSS-20H Standard Stainless Steel Probe With Hanger
Electro-Sensors MTSS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. It is a standard-duty stainless steel probe with hanger and 8 feet of cable attached. |  | MTSS-30H Heavy-Duty Stainless Steel Probe With Hanger
Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. It is a heavy-duty stainless steel probe with hanger and 8 feet of cable attached. |  | SCU-200 Tilt Switch Control Unit
Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection of transfer chute plug-up, control of material depth in crusher bowls, and the sensing of alarm conditions in rock box, screen classifier, etc. |
| Weighing - Digital Load Cells | |  | HBM Digital Load Cells
Digital load cells on the basis of the strain gage technology provide new impetus for the areas of dynamic weighing, sorting, filling, and dosing. | | Weighing - Electronics | |  | 9300 Weight Indicator
6-digit unipolar display in a rugged NEMA 4X stainless steel washdown enclosure. Able to power up to 8 load cells, the 9300 is an excellent choice for scales and weighing use. Featuring front panel tare and Net/Gross buttons, 3-stage digital filtering, swivel stand and available 4-20 mA output. |  | 9390 Battery Powered Weight Indicator
6-digit Unipolar display in a rugged NEMA 4X Stainless Steel washdown enclosure. Powers up to 4 load cells for portable and remote weighing applications. Standby mode for extended batter life. |  | HBM Weighing Electronics
HBM supplies weighing electronics for all industrial platform scales, truck or container scales. In addition HBM offers electronic systems for process automation, e.g. for checkweigher and dosing process. |  | UMC 600 Weight Indicator-Controller
The UMC600's rugged stainless steel design includes Batching and Weighing functions such as setpoints, preact and dribble control. Powers up to 8 350-ohm load cells. | | Weighing - Load Cells | |  | HBM Weighing Load Cells
Industrial production and scales constructions, production of building materials, food and consumer goods industries, pharmacy, and medical engineering... In almost all sectors where goods are produced, processed or controlled, HBM weighing technology components can be found. For the majority of HBM load cells official approval certificates are available. Appropriate certificates are also available for their worldwide use. All our standard load cells are also available for the various zone areas in accordance with the valid ATEX directive. | | Weighing - Single Point | |  | HBM Single Point Load Cells
The term platform scale nowadays covers a wide field of application in the industrial weighing technology. It covers the design and configuration of equipment such as high-precision laboratory balances, shop-counter scales and personal weighing machines right through to post office weighers, medical scales etc. Platform scales are characterised by one or more load cells, usually arranged under a platform (scale pan) on which the goods intended for weighing are placed. | | Weighing - Weigh Modules | |  | A4200 & A4600 Weighcheck Load Cells
Low profile load cell specifically designed for tank weighing where it is necessary to accommodate expansion and contraction of the tank. |  | HBM Weighing Modules
HBM offers solutions for weighing and level measurement in process industry applications and for in batching processes in the chemical, pharmaceutical, food and construction materials industry. In all these sectors our products are used continuously on a daily basis, in the harshest of environments. |
|
|
|
|
|
|
|