|
|
|
 |
|
|
|
Transport or transportation is the movement of people and goods from one location to another. Transport is performed by modes, such as air, rail, road, water, cable, pipeline and space. Sensor technology can be utilized in the production and control of the operations, infrastructure or vehicles. |
|
|
 Products |
| |
 | 1201 Crash Test Accelerometer
The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g. |  | 1201F Crash Test Accelerometer
The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Available in ranges from 50 g to 1000g. |  | 1203 Triaxial Crash Test Accelerometer
The Model 1203 Accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Available in ranges from 50g to 1000g. |  | 1207 Crash Test Accelerometer
The Model 1207 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. This device features a rugged strain relief. Available in ranges from 50g to 1000g. |  | 1207F Crash Test Accelerometer
The Model 1207F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. This device features a rugged strain relief. Available in ranges from 50g to 1000g. |  | 201 Accelerometer
The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g. |  | 203 Accelerometer
The Model 203 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g. |  | 3700 Shock Accelerometer
The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. Available in ranges from ±50g to ±6000g. |  | 3801A Accelerometer
The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. Available in ranges from ±2g to ±2000g. |  | 4000A Accelerometer
Economical, signal conditioned with integral temperature compensation. Rugged aluminum housing ideal for transportation and instrumentation testing. Available in ±2g to ±200g. |  | 4001A Accelerometer
The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates an integral 5-pin connector at the end of the cable assembly. Available in ranges from ±2g to ±200g. |  | 4002 Accelerometer
The Model 4002 is a low frequency DC response accelerometer with exceptional resolution. The accelerometer is designed for optimum signal-to-noise ratio and offers an amplified signal conditioned output. Available in ranges from ±2g to ±200g. |  | 4202 Biaxial Accelerometer
The Model 4202 Biaxial Accelerometer is designed with performance and reliability in mind. A heavy-duty shielded cable and an EMI/RFI module protects the accelerometer from the harsh operating environments. Available in ranges from ±6g to ±30g. |  | 4203 Triaxial Accelerometer
The Model 4203 Triaxial Accelerometer is designed with performance and reliability in mind. A heavy-duty shielded cable and an EMI/RFI module protects the accelerometer from the harsh operating environments. Available in ranges from ±6g to ±30g. |  | 4600 Accelerometer
The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4602 Accelerometer
The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4604 Accelerometer
The Model 4604 is a rugged, low-profile MEMS accelerometer designed for both static and dynamic applications. The device offers outstanding thermal performance and features a robust strain relief and cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4605 Accelerometer
The Model 4605 is designed for both static and dynamic measurements in critical and demanding applications. The device offers outstanding thermal performance and features a detachable cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4610 Accelerometer
The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4620 Accelerometer
The Model 4620 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device incorporates a Teflon insulated cable with a rugged strain relief designed for demanding applications. Provides an amplified output. Available in ranges from ±2 to ±250g. |  | 4623 Accelerometer
The Model 4623 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device features EMI/EMC protection circuitry and a rugged strain relief for harsh installations. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4630 Triaxial Accelerometer
Low noise; static & dynamic response. The 3 circuit assemblies are hermetically sealed. Operates on common or separate power supplies. Ranges from ±2 to ±500g. |  | 4632 Triaxial Accelerometer
The Model 4632 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing. Provides amplified outputs for each axis. Available in ranges from ±2 to ±200g. |  | 4801A Accelerometer
The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output, enhanced temperature compensation, and shock protection up to 10,000g. Available in ranges from ±2 to ±500g. |  | 4803A Triaxial Accelerometer
The Model 4803A is a low noise triaxial accelerometer in a rugged, welded stainless steel package. The silicon MEMS accelerometer incorporates integral temperature compensation and provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4810A Accelerometer
The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package. It features a detachable cable, temperature compensation, and a signal conditioned output. Available in ranges from ±2 to ±500g. |  | 52 Crash Test Accelerometer
The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit has been designed for side impact crash applications. Available in ranges from ±50g to ±2000g. |  | 52M30 Crash Test Accelerometer
The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit has been designed for side impact crash applications. Features an aluminum housing and jacketed cable. Available in ranges from ±50g to ±2000g. |  | 53 Triaxial Crash Test Accelerometer
The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Available in ranges from ±50g to ±2000g. |  | 61 Crash Test Accelerometer
The Model 61 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. Designed for in-dummy crash tests. Available in ranges of ±750g and ±2000g. |  | 62 Crash Test Accelerometer
The Model 62 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. Available in ranges from ±50g to ±6000g. |  | 63 Triaxial Crash Test Accelerometer
The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 500g to 2000g and frequency response to 3000 Hz, this sensor is easily mounted in hard to reach places. |  | 64 Crash Test Accelerometer
The Model 64 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. Available in ranges from ±50g to ±6000g. |  | 64B Crash Test Accelerometer
The Model 64B accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit is compliant with SAE J211 standards for anthropomorphic dummy instrumentation. Available in ranges from ±50g to ±6000g. |  | 64C Crash Test Accelerometer
The Model 64C accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit is compliant with SAE J211 standards for anthropomorphic dummy instrumentation. Available in ranges from ±50g to ±6000g. |  | 68C Crash Test Accelerometer
The Model 68C accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. This unit is compliant with J211 specifications for anthropomorphic dummy applications. Available in ranges of ±50g and ±2000g. |  | 7204A IEPE Accelerometer
A case isolated high temperature IEPE accelerometer with internal shielding. Has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. Available in ±50 to ±500g ranges. |  | EGAS Accelerometer
The Model EGAS is a miniature, uniaxial accelerometer featuring ranges from ± 5 g’s through 2500 g's. |  | EGAS3 Triaxial Accelerometer
The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g. |  | EGAX & EGAXT Accelerometers
The Model EGAX/EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGAXT3 Triaxial Accelerometer
The Model EGAXT3 miniature triaxial accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGCS-A2 & EGCS-B2 Accelerometers
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±5000g. |  | EGCS-D0 Accelerometer
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overange stops that are set to protect the unit against 10,000 g shocks. It is a screw mount, stainless steel device. Available in ranges from ±5g to ±5000g. |  | EGCS-D1S Accelerometer
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overange stops that are set to protect the unit against 10,000 g shocks. It is a screw mount, stainless steel device. Available in ranges from ±5g to ±5000g. |  | EGCS-L High Amplitude Shock Accelerometer
The Model EGHS-L is a high amplitude piezoresistive shock accelerometer designed for transient shock testing. Available in ±30,000g and ±60,000g ranges, it is packaged in a rugged welded stainless steel housing. |  | EGCS-S425 Accelerometer
The Model EGCS-S425 is a small, ISO 6487 and SAE J211 compliant piezoresistive accelerometer. Available in ranges from ±50g to ±2000g. |  | EGCS3-D Triaxial Accelerometer
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5g through ±5000g. This rugged device is ideal for offshore, downhole and shock testing applications. |  | EGPE-1A IEPE Accelerometer
The model EGPE-1A is a high performance IEPE type accelerometer with an operating temperature range up to +150°C. It is available in ±10g to ±500g ranges and provides a flat frequency response up to 15kHz. |  | EGPE-2A Charge Accelerometer
The model EGPE-2A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It provides stable thermal response up to +260°C, and features the popular through hole mount installation. Available in ±50g to ±2000g dynamic range. |  | LCA-100 Accelerometer
The Jewell LCA Series Accelerometer is a general-purpose ±0.5G to ±5G device designed for industrial, commercial and aerospace sensing requirements. |  | LCM-100 Accelerometer
The Jewell LCM accelerometer is a general-purpose acceleration sensor for industrial, commercial and aerospace applications. |  | LSM Accelerometer
The Jewell LSM offers equivalent features to the LCA in a smaller package — approximately 1" cube. |  | LSXH Accelerometer
The JEWELL LSXH is the most rugged of all of our accelerometers. The JEWELL LSXH is a compact high-performance, high-accuracy accelerometer with a range of 0.017G to 10G full scale. |  | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. | | Accelerometers - Angular Accelerometers |  |  | ASB Angular Accelerometer
The JEWELL ASB Series Angular Accelerometer is a general purpose devise made for industrial, commercial, and aerospace sensing requirements. Its many applications include antennae stabilization, torque measurement, flight control systems, automotive testing, and optical system stabilization. | | Accelerometers - Board Level / OEM | |  | 3022 Accelerometer
The Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3028 Accelerometer
The Model 3028 is a piezoresistive silicon accelerometer packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. Available in ranges from ±2g to ±200g. |  | 3031 Accelerometer
The Model 3031 is a piezoresistive SMD accelerometer designed for demanding high volume applications. Available in ranges of ±50g and ±100g. |  | 3038 Accelerometer
The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. Available in ranges from ±50g to ±6000g. |  | 3052 Accelerometer
The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3058 Accelerometer
The Model 3058 is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3255 Accelerometer
The Model 3255 is a two-chip accelerometer designed for surface mount applications. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±25g to ±100g. |  | 4503 Accelerometer
The Model 4503 is an economical board mountable accelerometer. The output is signal conditioned and temperature compensated. Available in ranges from ±2g to ±200g. |  | 4655 Accelerometer
The Model 4655 is a signal conditioned, hermetically sealed, board mountable MEMS accelerometer. The accelerometer incorporates integral temperature compensation and a frequency response from DC to 2000Hz. Provides an amplified output. Available in ranges from ±2 to ±200g. |  | ACH-01 Accelerometer
The ACH-01 is a low cost, robust, general purpose accelerometer with outstanding performance characteristics. It is specifically designed for high volume applications that require the permanent installation of an accelerometer. | | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. |
 | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. |  | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. |  | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. |  | 1800 Platinum Standard™ Calibration Load Cell
The 1800 Platinum Standard is the ultimate in calibration grade load cells and has a 2% lower limit per ASTM E74 and an integral stud. |  | BN100A Bridge Calibration Unit
The BN100A bridge calibration unit is a highly precise calibrator to calibrate measuring equipment and measurement chains which function with a carrier frequency of 225Hz. The BN100A bridge calibration unit is inserted in the measuring system to be calibrated in place of the transducer (full bridge), or is connected directly with the measuring instrument, and simulates with the aid of switchable inductive dividers the output signals of the transducer in a range of ±100mV/V. |  | Gold Standard Load Calibration System
PC-based system for calibration of load cells and torque transducers. Normally used with hydraulic load frame. Separate software available for calibration of load cells in a deadweight system. |  | Gold Standard™ Load Frames
Available in capacities 3K, 10K, and 55K. |  | K148 Calibration Unit for full bridge amplifiers
The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with measuring ranges from ±0.2 mV/V up to ±100 mV/V to be calibrated. |  | K3607 Calibration Unit
The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement chain. For this purpose the calibration instrument is equipped with a high-precision resistance network in star configuration, designed to simulate 350-ohm strain gauge full-bridge transducers. |  | K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy. |
| Data Acquisition - High Speed - Dimension | |  | Dimension4i High Speed DAQ & Transient Recorder
Can be used both as a data recorder and a transient recorder. Combines all essential instruments in one device. Easy to understand and operate. |  | Accelerometer Digitizer
The Accelerometer Digitizer is a very versatile and high performing amplifier, ideal for powering ICP transducers, or accommodating AC and DC signals. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, analog anti-aliasing filters. |  | Data Recorder Dimension4i (specifications)
Dimension4i can be used both as a data recorder and as a transient recorder – meeting the highest of demands. Dimension4i therefore combines all essential instruments in one device. Because Dimension4i was developed in cooperation with users as a professional tool for daily use, operation of the Dimension4i is intuitive and oriented towards the requirements of use: easy to understand, easy to operate. Routine tasks are quickly completed with Dimension4i so that you can concentrate fully on your tasks as a professional. |  | Isolated Digitizer
The Dimension Isolated Digitizer was designed for the extreme testing conditions and accuracy requirements of high voltage measurement applications. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, isolation circuitry and analog anti-aliasing filters. | | Data Acquisition - High Speed - Genesis | |  | GEN7t & GEN16t High Speed - High Channel Count DAQ
With GEN7t/16t, you can configure up to 1,080 synchronized channels according to your requirements. Your system grows from the first channel onwards exactly as your project changes. Stay on top, rapidly, reliably, flexibly and always with perfect precision. Up to 8 GEN "slaves" can be connected to a GEN7t/16t master, each of these 9 devices can contain between 4 and 120 channels, and all 1,080 channels can measure in synchronization with each other. |  | GEN7t & GEN16t - mainframes & option
The GEN series Data Acquisition System is one of the most sophisticated and powerful systems in the marketplace and demonstrates the quality HBM has to offer. |  | Basic 1M Digitizer
8 Channel, 1MS/s, Basic Card, 256MB RAM (16 MS/ch) |  | Basic 1M ISO Digitizer
8 Channel, 1MS/s, Basic Card, 512MB RAM (32 MS/ch) - isolated, unbalanced-diff |  | Basic 1M XT ISO Digitizer
8 Channel, 1MS/s, Basic XT Card, 512MB RAM (32 MS/ch) - isolated, with extended input range |  | Basic 200K Digitizer
8 Channel, 200kS/s, Basic Card, 128MB RAM (8 MS/ch) |  | Binary Marker CT
The Binary Marker CT board CT is a dedicated binary input option for GEN DAQ products. It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of counter/timer functionality. Each channel can have its own function. |  | Bridge 1M ISO Digitizer
4 Channel, 1MS/s Bridge Card, 512MB RAM (64 MS/ch) - isolated |  | Bridge 200K ISO Digitizer
4 Channel, 200kS/s Bridge Card, 128MB RAM (16 MS/ch) - isolated |  | Fast Differential Digitizers
For ultra fast signals, the 25 MS/s and 100 MS/s high speed digitizer boards are equipped with four channels sampling at incredible high speed. With selectable anti-aliasing filtering and 14-bit (100 MS/s) or 15-bit resolution (25 MS/s), these inputs turn the GEN series into an extremely fast transient recorder. |  | GEN2i High Speed - Portable Data Recorder
GEN2i is a revolutionary new portable data recorder, offering incomparably powerful features and an exciting touchscreen user interface. With up to 16 input channels, fully configurable to your needs, it provides both continuous direct-to-disk as well as fast transient recording. |  | Genesis GEN5i Portable High Speed DAQ
The complete, portable test laboratory. Up to 40 channels available simultaneously. With integrated PC, you can measure directly at the event location & analyze the results. |  | Universal 1M ISO Digitizer
4 Channel, 1MS/s Universal Card, 512MB RAM (64 MS/ch) - isolated |  | Universal 200K ISO Digitizer
4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) - isolated | | Data Acquisition - Laboratory Universal Data Acquisition | |  | MGCplus Data Acquisition System (overview)
With more than 100,000 channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. Supports a wide spectrum of transducers, fieldbus connections and standard PC interfaces. It is the choice for almost all industrial, laboratory and R&D measurement applications. Capable to measure force, displacement, pressure, temperature, torque, acceleration, strain, stress, voltage, current, frequency or resistance - at low or high speeds. |  | APxx Connection Boards for MGCplus
Connection boards for single channel or multi-channel amplifiers. Also connection boards for special-function modules. |  | Cpxx Communication Processors for MGCplus
Outstanding performance and use of standard PC interfaces distinguish the communication processors CP22 and CP42 for MGCplus. Both allow the assembly of networks: An important condition if data acquisition systems with more than 1,000 active channels should assembled. |  | ML38 High-precision Single-channel Amplifier Module for MGCplus
The ML38B precision amplifier provides a high resolution of 1,000,000, an accuracy of 0.0025% and an excellent long-term stability. |  | MLxx Amplifier & Communication Modules for MGCplus
Single-channel and multi-channel amplifer modules, and special-function modules for the MGCplus system. | | Data Acquisition - Rugged/Mobile - eDAQ | |  | eDAQ-lite Rugged Mobile DAQ
The eDAQlite is the go anywhere, test anything compact version of the SoMat eDAQ. Engineered using the same technology, the eDAQlite has similar leading-edge signal conditioning and a capacity to perform a broad range of on-board data processing, triggering, intelligent data storage, and complex computations. There is no learning curve, new software, or file formats; and systems can be seamlessly networked together. |  | EBRG eDAQ Bridge Layer
The SoMat eDAQ Bridge Layer (EBRG) offers 16 simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including: strain gauges, accelerometers, pressure transducers, load cells, and other general analog signals. |  | ECOM eDAQ Vehicle Network Communications Layer
The SoMat eDAQ Vehicle Network Communications Layer (ECOM) offers (3) CAN device interfaces, (1) Vehicle Bus Module (VBM) interface and a GPS communications port. It is an extremely versatile layer providing a direct correlation between vehicle bus channels with physical data (analog, thermocouple and frequency) as well as GPS. |  | ECPU-PLUS Main Processor for eDAQ
For the system that defines Rugged, Mobile Data Acquisition, it all starts here. The SoMat eDAQ Base Processor (ECPU-PLUS) is the foundation eDAQ systems are built from. Specifically designed for these applications; input power for the system operates in a wide range from 10-60 VDC. Internal back-up batteries also protect the eDAQ from unplanned power losses or low voltage events. |  | EDIO eDAQ Digital Input-Output Layer
The SoMat eDAQ Digital Input/Output Layer (EDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The EDIO offers twenty four channels that can be used as digital inputs/outputs with twelve additional channels for wide range inputs. |  | EHLS eDAQ Simultaneous High Level Layer
The SoMat eDAQ Simultaneous High Level Layer (EHLS) offers 16 simultaneously sampled high-level differential analog inputs through independent connectors. Up to four EHLS layers can be added to a single eDAQ system enabling up to 64-channels. Networking multiple eDAQ’s make synchronous EHLS channel counts virtually limitless. |  | EITB eDAQ Isolated Thermocouple Layer
The SoMat eDAQ Isolated Thermocouple Layer (EITB) measures temperatures on 8-channels of isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the EITB is available in the four most common calibration types (J, K, T and E). Each channel has individual cold junction compensation with isolation to 500V. |  | ENTB eDAQ Non-Isolated Thermocouple Layer
The SoMat eDAQ Non-Isolated Thermocouple Layer (ENTB) measures temperatures on 32-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with the four most common calibration types (J, K, T and E). Each channel is individually software-selectable between these calibrations. |  | eDAQ Rugged Mobile DAQ
Sets the standard for rugged, mobile data acquisition; a stand-alone sealed system designed for testing in the harshest of environments. |  | ELBAT-2 eDAQ-lite Battery Layer
The SoMat eDAQ-lite Battery Layer (ELBAT-2) is located below the eDAQ-lite in a machined aluminum enclosure. It attaches with four 8-32 screws to the base plate of the eDAQ-lite replacing the rubber feet. The feet can be relocated to the battery layer for mounting purposes. A short cable, with the eDAQ D-Sub power connector, connects to the eDAQ-lite and is also utilized for charging purposes. |  | ELBRG eDAQ-lite Bridge Layer
The SoMat eDAQ-lite Bridge Layer (ELBRG) offers four simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including: strain gauges, accelerometers, pressure transducers, load cells, and other general analog signals. |  | ELCPU eDAQ-lite Base Processor
The SoMat eDAQ-lite Base Processor (ELCPU) is the foundation eDAQ-lite systems are built from. Specifically designed for rugged, mobile applications; input power for the system operates in a wide range from 10-60 VDC (with ELCPU-PLUS option). Internal back-up batteries also protect the eDAQ-lite from unplanned power losses or low voltage events. |  | ELDIO eDAQ-lite Digital Input-Output Layer
The SoMat eDAQ-lite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The ELDIO offers eight channels that can be used as digital inputs/outputs with four additional channels for wide range inputs. |  | ELHLS eDAQ-lite Simultaneous High Level Layer
The SoMat eDAQ-lite Simultaneous High Level Layer (ELHLS) offers 4 simultaneously sampled high-level differential analog inputs through independent connectors. Up to eight ELHLS layers can be added to a single eDAQ-lite system enabling up to 32 channels. Networking multiple eDAQ’s make synchronous ELHLS channel counts virtually limitless. |  | ELNTB eDAQ-lite Non-Isolated Thermocouple Layer
The SoMat eDAQ-lite Non-Isolated Thermocouple Layer (ELNTB) measures temperatures on 16-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with the four most common calibration types (J, K, T and E). | | Data Acquisition - Rugged/Mobile - Liberty | |  | Liberty Rugged Portable High Speed DAQ
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Liberty Rugged Portable High Speed DAQ (data sheet)
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Accelerometer Digitizer
Each module contains a 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. Integrated programmable excitation of 1 mA to 15 mA @ 28 V nominal. |  | Bridge Plus Digitizer
Each module contains a 16-bit digitizer on each channel with 2mV-10V full scale ranges, 6-pole Butterworth 20kHz Anti-alias filter, and a selectable Bessel or Butterworth FIR digital filter. Integrated excitation is 0 to 10V bipolar, 30mA. Includes bipolar shunt and monitor output. |  | CANbus Digital Input Card
Each module has one or two CAN nodes plus 32 digital inputs including counter/timer, frequency, RPM and quadrature encoder channels. |  | DC-32 and TC Digitizer
The DC-32 module contains a 10kS/s, 16-bit digitizer on each of 32 channels with 1V to 5V ranges F.S. |  | General Purpose Digitizer
Each module contains a 100kS/s, 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. | | Data Acquisition - Rugged/Mobile Thermocouple Module - cDAQ | |  | cDAQ Rugged Mobile Thermocouple Module
Engineered to operate within severe temperatures ranges of -40 to 125 °C with an IP 67 degree of protection, rating; the compact cDAQ modules allow users to take measurements directly in the most difficult test objects. It is available in 16-channel configurations for K-, J- or T-type thermocouples. | | Data Acquisition - Universal Data Acquisition | |  | QuantumX (overview)
QuantumX is a universal data acquisition system. "Universal" means that QuantumX can be used with all types of transducers. Its universal flexibility also means that you can use it to conduct all kinds of test and measurement tasks as well as for verification of results in any type of industrial environment. |  | QuantumX CX27 Ethernet-EtherCAT Gateway
CX27 allows integration of several QuantumX modules for real-time data acquisition of up to 199 signals via EtherCAT. Selected signals can simultaneously be monitored via Ethernet TCP/IP. |  | QuantumX MX1609 16-channel Thermocouple Amplifier
MX1609 is part of the QuantumX family and offers many excellent qualities: Reliable temperature measurement using the proven and widely used type K thermocouple – at the same time opening up fascinating new opportunities for your day-to-day measurement tasks. |  | QuantumX MX410 4-channel High-Dynamic Universal Amplifier
The MX410 provides both sampling rates of up to 96 kHz/channel and a high resolution of 24 bits. Results are highly accurate as required when capturing highly dynamic forces and accelerations. Compatible with strain gage transducers in half and full bridge configuration (DC, 4.89 kHz CF) as well as with inductive half and full bridges and current-fed piezoelectric sensors (IEPE). |  | QuantumX MX440A 4-channel Universal Amplifier
4 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX460 4-channel Frequency Measuring Amplifier
Capture digital rotational speed signals or evaluate pulse width modulation signals (PWM). Or integrate the worldwide leading HBM torque transducers into the QuantumX universal data acquisition system. Features sampling rates of up to 96 kHz/channel and a bandwidth of up to 38 kHz. An ideal choice for applications in motor and drivetrain development. |  | QuantumX MX840A 8-channel Universal Amplifier
8 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX878 Transmitter with 8 analog voltage outputs
The MX878 transmitter enables scaled measurement signals to be monitored in a standardized unit of measurement or transmitted to other systems to allow flexible and efficient data analysis. In addition, signals can be set off against each other using algebraic operations. The module also features functions for peak value analysis. |  | Spider8 Multi-Channel Electronic PC Measurement Unit
Spider8 is a multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer. The Spider8 offers a congenial and economic alternative to systems consisting of a number of components. These are usually accommodated partly in the computer and partly externally and must first be wired and configured to form a measurement system. |
 | 9320 Hand Held Digital Indicator
The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant. |  | 9820 Digital Indicator
Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector. |  | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9840 Intelligent Digital Indicator
The 9840 is suitable for use in calibration labs, field service, or anywhere high accuracy is important. Features include a bipolar 6-digit 2-line display, remote sense, low noise, 22-bit resolution, USB port with RS232 communication, mV/V calibration and the ability to store up to 25 different sensors. 6-point linearization, unit conversion, front-panel tare. Self calibration via TEDS Plug & Play ready IEEE1451.4 compliance. |  | 9850 Multi-Channel Digital Indicator
The model 9850's modular design allows the use of 7 different types of channel cards in 2 available channels. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging. |  | 9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality. |  | CVT Analog Vacuum Controller
CVT Vacuum Controllers are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers operate in the same standard ranges as the VT meters with the addition of single or double user selectable control limits. Includes durable 10A SPDT control points. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |  | Digital CVT Vacuum Controller
The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | Digital VT Vacuum Indicator
The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges. |  | HPM 4-6 Portable Vacuum Indicator
The Model HPM 4/6 is a compact, hand-held, digital display, battery operated control unit. When combined with the Teledyne Hastings Instruments (THI) rugged thermopile sensors it becomes a vacuum instrument designed for portability and ease of use in applications where AC power is not readily available. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | MP2000 Digital Indicator
This microprocessor based LVDT indicator and set-point controller is designed for industrial and process control applications utilizing any LVDT/RVDT-based measurement device. In addition to displaying real-time readings of LVDTs, RVDTs and gage heads, the MP2000 also displays MIN, MAX, TIR, A+B and A-B values. |  | Scout55 4.8kHz Carrier-Frequency Amplifier
The SCOUT55 measuring amplifier is suitable for recording and processing measured values from passive transducers. Transducers that can be connected are: strain-gauge half and full bridges, inductive half and full bridges, LVDTs, piezoresistive transducers, potentiometers. |  | THPS-760 Plus Digital Vacuum Controller
The THPS 760 Plus Vacuum Controller is an exceptionally stable, accurate and repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 41/2 digit meter indicates in 0.1 Torr units from 0.1 to 1000.0 Torr. Designed for use with the HPM-760S vacuum sensor. |  | VT Analog Vacuum Indicator
VT-Series Vacuum Gauges are available in three standard ranges: 0-100 mTorr, 0-1000 mTorr, and 0-20 Torr. A self-contained gauge circuit is attached to the rear of the direct reading meter. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |
| Encoders - Magnetic Encoders | |  | ED-18 Magnetic Encoder
The ED-18 Series magnetic encoder can be used as either a rotational feedback sensor or as a human machine interface (HMI) device. As a light duty feedback sensor it can provide rotation speed, direction or positioning information. The analog output provides absolute angular position information even when power is cycled on and off. As an HMI device it can be used as a rotary input control for use on instrumentation panels. |  | ED-19 Magnetic Encoder
The ED-19 Series magnetic encoder is designed for medium duty feedback applications. Resolutions are available from 64 to 1024 counts per revolution. The magnetic technology used in the ED-19 series is plug-in compatible with existing encoder products, with the added advantages of an extended temperature range and fully sealed electronics. The ED-19 suffers no LED degradation, meaning it has a virtually unlimited life. |  | ED-20 Magnetic Encoder
The ED-20 Series magnetic encoder is designed for medium duty industrial feedback applications with ball bearing supported shaft. Resolutions are available from 200 to 1024 counts per revolution. This encoder series also features line drivers with active termination for long cable runs and reverse voltage protection. The ED-20 also offers the option of high voltage differential, low voltage differential or open collector (NPN) outputs. |  | ED-21 Magnetic Encoder
The ED-21 Series magnetic encoder is designed to replace traditional mechanical potentiometers. This product is offered with a ball bearing supported shaft. Five standard output ranges are available: 0.5 - 4.5v, 0 - 5v, 0 - 12v, 4 - 20mA and 0 - 20mA. The magnetic technology used in the ED-21 offers advantages over conventional electromechanical potentiometers with sealed electronics, extended temperature ranges, and virtually unlimited life. |  | ED-22 Magnetic Encoder
The ED-22 Series magnetic potentiometer can be used to replace a conventional potentiometer. This product offers 270 degrees of electrical travel, integrated rotational stop system, 300 degrees of mechanical travel, utilizing a sleeve bearing and shaft fitted with an O-ring seal. The non-contact magnetic sensor design utilized in the ED-22 is well suited for industrial applications with temperature extremes, high vibration and shock, and contamination. | | Encoders - Optical Encoders | |  | 380 Quad Rotary Shaft Encoder
Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals. |  | 670 & 671 (Analog) Ruggedized Shaft Absolute Encoders
The 670 & 671 (Analog) are ruggedized shaft absolute encoders that provides an analog output of 0-20 mA or 4-20 mA. |  | 803 Heavy Duty Hollow Shaft Incremental Encoder
The model 803 is a hollow shaft encoder that features an extremely robust housing for harsh environments. |  | 841 Heavy Duty Hollow Shaft Incremental Encoder - Explosionproof
The model 841 is a heavy duty hollow shaft encoder, that features a flameproof enclosure. ATEX certified. |  | 850 Heavy Duty Shaft Incremental Encoder
The model 850 is a heavy duty incremental encoder that features a Ø 11 mm shaft with key nut. |  | 861 (Commutation) Heavy Duty Hollow Shaft Incremental Encoder
The model 841 is a heavy duty hollow shaft encoder that features commutation outputs. Built for harsh industrial environments. |  | 861 Heavy Duty Hollow Shaft Incremental Encoder
The model 861 is a hollow shaft encoder that features an extremely robust housing for harsh environments. |  | 862 Heavy Duty Hollow Shaft Incremental Encoder
The model 862 is a hollow shaft encoder that features an extremely robust housing for harsh environments. Also features electrical insulation up to 2.5kV. |  | 865 Double Heavy Duty Hollow Shaft Incremental Encoder
The model 865 is a hollow shaft encoder that features two galvanically separated encoders in one extremely robust housing. |  | ESA 1608 Extreme Shaft Absolute Encoder
The model ESI 1504 is a shaft encoder with extreme resistance to mechanical loads, vibrations and shock, and a SSI or EnDat output. Has exceptional durability in tough environments of high temperatures and dust. Specially designed for heavy industries such as steel, crane and oil. |  | ESI 1503 Extreme Shaft Incremental Encoder
The model ESI 1503 is a shaft encoder with extreme resistance to mechanical loads, vibrations and shock. Specially designed for heavy industries such as steel, crane and oil. |  | ESI 1504 Extreme Shaft Incremental Encoder
The model ESI 1504 is a shaft encoder with extreme resistance to mechanical loads, vibrations and shock. Has exceptional durability in tough environments of high temperatures and dust. Specially designed for heavy industries such as steel, crane and oil. |  | RHA 607 & 608 (CANopen) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (CANopen) encoders have a robust enclosure for harsh environments. They features a CANopen output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (DeviceNet) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (DeviceNet) encoders have a robust enclosure for harsh environments. They features a DeviceNet output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (Profibus) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (Profibus) encoders have a robust enclosure for harsh environments. They features a Profibus output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RHA 607 & 608 (PROFINET) Ruggedized Hollow Shaft Absolute Encoders
The RHA 607 and 608 (PROFINET) encoders have a robust enclosure for harsh environments. They features a PROFINET output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (CANopen) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (CANopen) encoders have a robust enclosure for harsh environments. They features a CANopen output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (DeviceNet) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (DeviceNet) encoders have a robust enclosure for harsh environments. They features a DeviceNet output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (Profibus) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (Profibus) encoders have a robust enclosure for harsh environments. They features a Profibus output. Suitable for the automation industry, packaging machines, cranes, and elevators. |  | RSA 607 & 608 (PROFINET) Ruggedized Shaft Absolute Encoders
The RSA 607 and 608 (PROFINET) encoders have a robust enclosure for harsh environments. They features a PROFINET output. Suitable for the automation industry, packaging machines, cranes, and elevators. |
| Fluid Properties Sensors - Fluid Property Analyzers | |  | FPA4200BST Fluid Property Analyzer
The fluid property analyzer (FPA) is designed to provide customers with an industrial robust and flexible platform for monitoring applications that may include distillation and chemical process streams, machinery lubricants, and gear oils. | | Fluid Properties Sensors - Fluid Property Sensors | |  | FPS2800 Fluid Properties Sensor
The FPS2800B12C4 measures the viscosity, density, dielectric constant and temperature of fluids. From these measurements it can determine the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic and gear oils, refrigerants and solvents. |  | FPS2851ULC4 Fluid Properties Sensor
The FPS2851ULC4 is a sensor that directly and simultaneously measures all the critical parameters of aqueous urea solution. Relying on patented tuning fork technology, the measurements of urea concentration, temperature enable users to determine if the quality of the employed reducing fluid will enable Selective Catalytic Reduction systems to achieve optimal performance. |
 | HM1500LF Humidity Sensor
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply. |  | HM1520 Humidity Sensor
HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply. |  | HTM2500 Humidity and Temperature Sensor
HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc. |  | Humidity Sensors (overview)
Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve control and output. |
 | VS-1 Vibration Monitor
The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-1XP Vibration Monitor
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. |  | VS-2 Vibration Monitor
Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load. |  | VS-2XP Vibration Monitor
Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance. |  | VUM-800 Control Unit
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |  | VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. |
 | JC Handles: Ergonomic Handles for JC Joysticks
The Penny & Giles JC300, JC400, JC150, JC600, JC2000 and JC6000 range of single and multi-axis joystick controllers have a number of ergonomic handle designed to suit different functions. |  | JC100 Single Axis Fingertip Joystick
Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystick that provides smooth, precise fingertip control in one axis. |  | JC120 Single Axis Fingertip Joystick
Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths. |  | JC150 Rugged Single-Axis Joystick
The JC150 was designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are important. |  | JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options. |  | JC200 Multi-Axis Inductive Joystick
The JC200 has been designed for use with a separate valve driver card or machine control unit. Safety features include a lever mechanism that returns to the centre position when released and internal fault monitoring circuits. Typical applications include the control of wheelchairs, fork lift trucks and agricultural machinery. |  | JC2000 Multi-Axis Contactless Joystick
The JC2000 is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions. |  | JC300 Multi-Axis Fingertip Joystick
Designed for use with an electronic controller, the JC300 can be specified to generate up to five switched outputs per half axis, or analogue and switched reference signals. Available in single, dual, or three axis. |  | JC3000 Single and Dual axis Fingertip Joystick
For applications requiring a simplistic approach to fingertip control where strength and reliability are important. Comes in single or dual axis & various user defined features. |  | JC400 Multi-Axis Fingertip Joystick
Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip control with sequential detent feel. |  | JC6000 Rugged Multi-Axis Joystick
The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks. |
| Linear Position Sensors - Hall Effect | |  | VPT210 Valve Position Transducer
The VPT210 spool feedback sensor has been designed for the hydraulic spool valve market - particularly for new generation hydraulics fitted to on- and off-highway vehicles. | | Linear Position Sensors - Inductive | |  | SLT190 Contactless Linear Position Transducer
Designed to provide reliable, fit-and-forget position sensing (up to 500mm) within a compact transducer size for the most arduous operating environments. | | Linear Position Sensors - LVDT | |  | HCA Hermetically Sealed LVDT
The HCA Series LVDTs are tungsten-inert gas (TIG) welded to form a hermetic seal that is impervious to dirt, water, steam and corrosive liquids and vapors. They feature a glass-sealed, MS-type connector, but do not permit through bore operation. All exposed surfaces are stainless steel, including the boreliner and connector shell. |  | HCA-RA Hermetically Sealed LVDT
HCA-RA right angle series LVDTs are tungsten-inert gas (TIG) welded for hermetic sealing with an easy to install radial connector termination. A design improvement to the standard HCA series, the HCA-RA has a through bore design and a right angle connection for applications where product length is an issue. The HCA-RA series can withstand up to 1000psi of external pressure. |  | MHR Miniature LVDT
The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation assembly. High sensitivity results from close electrical coupling between coil and core. A magnetic stainless steel housing provides electromagnetic and electrostatic shielding. | | Linear Position Sensors - Magnetic Encoder | |  | ED-30 Magnetic Encoder
The ED-30 series incremental linear position sensors are designed for demanding OEM applications requiring low cost linear position feedback. The ED-30 series sensor provides resolutions from 0.08mm down to 0.02mm. Designed to operate in manufacturing environments, the sensor is unaffected by dust, dirt, oil and changing ambient light conditions. | | Linear Position Sensors - Potentiometers | |  | MLS130 Linear Potentiometer
The MLS130 is a competitively priced linear position sensor for the motorsport industry. Available in eight stroke lengths from 25 to 200mm, the MLS130 is sealed to IP66, and is supplied with a DR25 sheathed, 3-core cable. |  | SLS095 Linear Potentiometer
The SLS095 comes in an extremely compact, lightweight package in stroke lengths from 10 to 100mm. The miniature size of this new sensor makes it ideal for applications in robotics, animatronics, medical equipment and motorsport data acquisition. |  | SLS130 Linear Potentiometer
The SLS130 comes in an extremely compact, lightweight package in stroke lengths from 25 to 200mm. It is ideally suited to high volume OEM manufacturers, where high performance and reliability has paramount importance. |  | SLS190 Linear Potentiometer
The SLS190 is available in stroke lengths from 25 to 350mm. Using the proven benefits of Hybrid Track Technology, the SLS190 is ideally suited to high volume OEM manufacturers. |  | SLS320 Linear Potentiometer
The SLS320 is available in stroke lengths from 250 to 1600mm in a compact, with a lightweight, easy to use design. This unit is ideally suited to high volume OEM manufacturers. | | Linear Position Sensors - String (Draw Wire) Potentiometers | |  | DLS Draw Wire Linear Sensor
The DLS series of draw-wire linear position sensors are a cost effective way to measure linear displacements up to 5000mm in the most demanding industrial environments. |  | DP-series Digital Position Transducer
AMETEK RayelcoTM Digital Position Transducers (Optical Encoder Type) are designed to provide a digital output signal with an accuracy of 0.05% (+1 pulse) FS. The transducer operates from a variable voltage source of 4.75 Vdc to 30 Vdc @ 50 mA maximum. The three output channels "A", "B" & Index are TTL/CMOS compatible, single ended (Open Collector). The output signal current is +20 mA maximum, thereby eliminating line drivers for long electrical connections. |  | MP-series Miniature Position Transducer
AMETEK RayelcoTM Miniature Position Transducer has been designed to provide maximum user flexibility. This unit can be mounted in confined areas and by simply loosening a single bolt, direct the cable in any direction by turning the transducer body 360 degrees and the mounting swivel 180 degrees. Slotted cable entry allows the cable to be out of alignment by as much as ±10 degrees in one axis. Available in ranges up to 20 inches. |  | PS-series Submersible Position Transducer
AMETEK RayelcoTM Submersible Transducers are designed for use in fluids or in hostile environments to pressures up to 150 psi. Materials used in body construction are anodized aluminum, stainless steel or brass. Standard position transducers, with “A” circuit, can be excited with up to 25 volts, AC or DC. The “B” circuit option (simulated Wheatstone bridge) can be field adjusted for mechanical zero offset and output voltage. |
| Load Cells / Force Transducers - Calibration Grade Low Profile Load Cells | | | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. | | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. | | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. | | 1800 Platinum Standard™ Calibration Load Cell
The 1800 Platinum Standard is the ultimate in calibration grade load cells and has a 2% lower limit per ASTM E74 and an integral stud. | | Load Cells / Force Transducers - Column / Rod End | |  | 2100 High Capacity Column Load Cell
The 2100 is a column load cell typically used in higher force applications. Available in capacities from 300K lbf. to 1000K lbf. |  | 2120 Rod End
The 2120 rod end load cell is typically used with actuators where sensitivity to side loads is not important. |  | 2200 Calibration Column Load Cell
Many customers perform 100 and 200K E4 calibrations of material test machines in the field. Interface has developed the relatively lightweight portable 2200 series column load cells to use for field testing applications. These are very accurate column cells and come with handles to facilitate transportation from the vehicle to the job site. They also come standard with 16 gages as well as E74 calibration. | | Load Cells / Force Transducers - Load / Force Pins | |  | LP Loadpin Load Cell
The LP load pin is a custom product designed to replace pins or bolts that carry a load. Please consult us for a custom solution. | | Load Cells / Force Transducers - Load Buttons | |  | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. |  | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. | | Load Cells / Force Transducers - Low Profile Load Cells | |  | 1000 Fatigue Rated High Capacity Load Cell
The 1000 series is a fatigue rated load cell with 300% overload protection, an extremely low moment sensitivity of .1%/in, low zero float(toggle) and a higher fatigue life than competitive Stainless Steel load cells. Available in capacities from 100K lbf. to 1000K lbf. |  | 1000 Fatigue Rated Load Cell
The 1000 series is a fatigue rated load cell with 300% overload protection, an extremely low moment sensitivity of .1%/in, low zero float (toggle) and a higher fatigue life than competitive stainless steel load cells. Available in capacities from 250 lbf. to 50K lbf. |  | 1100 Ultra Precision Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities from 300 lbf. to 200K lbf. |  | 1101 Ultra Precision Compression-Only Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities of 1K lbf. to 50K lbf. |  | 1200 Standard 3-Wire Amplified Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. With the electronics built into the load cell, there is no need for a separate signal conditioner. Available in capacities of 300 lbf. to 100K lbf. |  | 1200 Standard High Capacity Load Cell
The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. Available in capacities from 200K lbf. to 2000K lbf. |  | 1200 Standard Load Cell
Higher output than most competitive load cells. For static, general purpose applications requiring a load cell compensated for eccentric loads. Comes in capacities of 300 lbf. to 100K lbf. |  | 2400 Standard Stainless Steel Load Cell
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities from 100 lbf. to 5K lbf. |  | 2400 Standard Stainless Steel Load Cell (10K lbf & 20K lbf)
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 10K lbf. and 20K lbf. |  | 2404 Standard Stainless Steel 2-Wire Amplified Load Cell
The 2404 is an amplified version of 2400 which gives mA output. It is still a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 50 lbf. to 5K lbf. |  | 2451-2461 Stainless Steel Compression-Only Load Cell
Interface has developed the new compact compression only 2451/2461 for applications requiring a very small footprint. The 2451 comes in 3 capacities, 50, 75, and 100K, each only 4.5” in diameter. The 2461 comes in 2 capacities, 150 and 200K, each only 5.5” in diameter. |  | 3200 Standard Stainless Steel Load Cell
The 3200 has all the features of the Interface Model 1200 Low Profile only is stainless steel and hermetically sealed for harsh applications. Available in capacities from 2.5K lbf. to 100K lbf. | | Load Cells / Force Transducers - Miniature | | | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. | | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. |  | U2B Force Transducer
The U2B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive loads. Loading is applied utilizing the integral mounting studs. Ranges are available from 0.5kN to 200kN. | | Load Cells / Force Transducers - Piezoelectric | |  | PACEline Piezoelectric Force Transducers (overview)
Your fitting and assembly processes are fast and space is a constraint. But you still expect consistently reliable quality control for your production. It’s time for PACEline. Compact and highly dynamic force measurement technology from HBM that makes the difference – and brings fresh impulses to piezo technology. |  | PACEline CFT Piezoelectric Force Transducer
CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic press-fit and assembly processes with fast force variations. |  | PACEline CFW Piezoelectric Force Washer
Thanks to their compact design CFW force washers can be used in many different applications, including adverse industrial environments. Presently available with nominal (rated) forces of 50 kN and 140 kN. Since the output signal is not dependent on the measuring range but on the force applied, CFW force sensors withstand very high overloads. |  | PACEline CMA Charge Amplifier
The PACEline CMA charge amplifier (analog amplifier) ensures reliable transmission of data from piezoelectric force transducers. This is done by signal conditioning to +/-10 V analog standard signals. |  | PACEline CMC - The piezoelectric force measurement chain
CFT piezoelectric force transducers and CMA analog amplifiers are combined to form a calibrated unit. Even with the most challenging task in your process monitoring: The CMC measurement chain keeps pace at any time. |  | PACEline CMD Digital Charge Amplifier
The digital charge amplifier for piezoelectric sensors assures multiple uses in many applications in the laboratory and production. The CMD600 measures very fast force, torque and pressure signals at frequencies of up to 30 kHz and can be used with piezoelectric sensors up to max. 600,000 pC (Pico coulombs). | | Load Cells / Force Transducers - S-Type | |  | SSM Sealed S-Type Load Cell
The SSM is a sealed version of SM. Available in capacities of 50 lbf. to 5K lbf. | | Load Cells / Force Transducers - Specialty | |  | EL20-S458 Belt Tension Load Cell
The EL20-S458 is a seat belt tension load cell, typically used for automotive crash test, military payload delivery, sport and military parachute tether loads, and automatic reserve chute deployment systems. Available in capacities of 1K lbf. to 3.2K lbf. | | Load Cells / Force Transducers - Strain Transducers | |  | SLB-700A Strain Transducer
The SLB-700A/06 strain transducer is designed to attach directly to the plane surface and enables the strain of the test object to be measured directly. Range of strain measured is 500 um/m. |
| Mass Flow Sensors - Digital Mass Flow Meters & Controllers | |  | HFC-D-302 Digital Mass Flow Controller
The model HFC-D-302 digital mass flow controller features a fast response and a low pressure drop. It has RS232/485 communication and self-diagnostics, and a normally closed valve for flow control. Available in ranges from 0 - 5 to 0 - 25,000 sccm (N2 Equivalent). |  | HFM-D-300 Digital Mass Flow Meter
The model HFM-D-300 digital mass flow meter features a fast response and a low pressure drop. It has RS232/485 communication and self-diagnostics. Available in ranges from 0 - 5 to 0 - 25,000 sccm (N2 Equivalent). | | Mass Flow Sensors - Mass Flow Meters & Controllers | |  | HFM-306 Mass Flow Meter
The model HFM-306 mass flow meter features a fast response and a low pressure drop. Available in ranges from 0 - 2,500 to 0 - 8,000 slm (N2 Equivalent). | | Mass Flow Sensors - Mass Flow Meters for Hazardous Locations | |  | HFM-I-401 Mass Flow Meter
For harsh industrial environments. Has an IP65 enclosure & is approved for Class I, Div 2, Groups A, B, C & D. Comes in 0-10 slm to 0-350 slm (N2 equivalent). |  | HFM-I-405 Mass Flow Meter
For harsh industrial environments. Has an IP65 enclosure & is approved for Class I, Div 2, Groups A, B, C & D. Comes in 0-100 slm to 0-2500 slm (N2 equivalent). |
| Piezo Film - Piezo Cable | |  | Piezo Polymer Coaxial Cable
Piezo cable is another form for piezo polymer sensors. Designed as a coax cable, the piezo polymer is the "dielectric" between the center core and the outer braid. When the cable is compressed or stretched, a charge or voltage is generated proportional to the stress. | | Piezo Film - Piezo Film Elements | |  | LDT Series
The LDT series has a 0.005" (125µm) polyester layer is laminated to a 28 µm or 52µm piezo film element. When used in a 'bending' mode, laminated film elements develop much higher voltage output when flexed than a non-laminated DT elements series. |  | LDT1-028K with Lead Attachments
The LDT1-028K is a multi-purpose, piezoelectric sensor for detecting physical phenomena such as vibration or impact. The piezo film element is laminate to a sheet of polyester (Mylar), and produces a useable electrical signal output when forces are applied to the sensing area. |  | MiniSense 100
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. It has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. |  | MiniSense 100 Analog PCB
The LDTC MiniSense 100 Analog PCB provides a simple way to evaluate the LDTC MiniSense 100. The unit consists of LDTC MiniSense 100, a low-power operation amplifier, comparator, and DC/DC converter, and passive components used in signal conditioning. |  | MiniSense 100NM (no mass)
The MiniSense 100NM is a low-cost cantilever-type vibration sensor offering moderate sensitivity over a useful frequency band up to 200 Hz. |
| Pressure Sensors & Transmitters - Board Mountable / OEM | |  | 1451 Pressure Sensor
The Model 1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gauge or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. |  | 1471 Pressure Sensor
The Model 1471 is a piezoresistive silicon pressure sensor, calibrated at room temperature. Packaged in a surface mount configuration, it is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gauge or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. |  | 4425 Pressure Sensor
The 4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. The pressure sensor is available in absolute or differential pressure ranges from 0-1 psi to 0-100 psi. |  | 50 Pressure Sensor
The Model 50 is a piezoresistive silicon pressure sensor packaged in a T0-5 configuration. This is offered in a nickel can without a tube. Absolute pressure ranges from 0-5psi to 0-500psi are available. The pressure media is applied to the circuit side of the chip. This design is intended for non-corrosive gases and is not recommended for liquids. |  | MS5401 Pressure Sensor
The MS5401 SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micro-machined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier protected by a metal cap. |  | MS5407 Pressure Sensor
The MS5407 SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micro-machined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier protected by a metal cap. |  | MS5412 Pressure Sensor
The MS5412 SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micro-machined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier protected by a metal cap. | | Pressure Sensors & Transmitters - Pressure Transducers | |  | EPB Pressure Sensor Probe
EPB is a small pressure probe sensor, small profile, stainless steel, flush mount transducer designed for general media. EPB is offered in pressure ranges from 0-5 to 5000 psi (0-0.35 to 350 bar), vented, sealed, and absolute pressure. |  | EPIH Subminiature Pressure Sensor
The EPIH is a subminiature pressure sensor, specifically designed for Dynamic and High Frequency measurements with resonant frequency up to 1.7 MHz. Available with many various housings, EPIH is one of the smallest pressure sensors in the world. |  | EPL Miniature Surface Mount Pressure Sensor
The EPL is a surface mount pressure sensor with a stainless steel diaphragm. Available in ranges from 5 to 5000 psi (0.35 to 350 bar), EPL is easy to install on flat surfaces using elastomer or epoxy. |  | EPRB-1 Ultra Miniature Pressure Transducer
Ultra Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 50 up to 0 - 5,000 PSI. |  | EPRB-2 Miniature Pressure Transducer
Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 5 up to 0 - 5,000 PSI. |  | EPRB-3 Ultra Miniature Pressure Transducer
Ultra Miniature Pressure Transducer with platinum RTD to sense media temperature, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 50 up to 0 - 5,000 PSI. |  | EPX Miniature Pressure Sensor
The EPX is a miniature threaded pressure sensor with stainless steel flush diaphragm compatible with general media. Threads M5x0.8 or 10-32 UNF are available with built-in 0-ring seal for an easy installation. The EPX is offered in many pressure ranges from 0.35 to 350 bar (5 to 5000 psi) with gage, sealed gage, or absolute pressure reference. |  | EPXN Pressure Sensor
The EPXN is a high performance small pressure sensor using silicon chip for clean media (non corrosive). With it's recessed port, it is best recommended for static applications or low frequency. Offered in pressure ranges from 0 - 5 up to 0 - 150 PSI. |  | EPXO Pressure Sensor
The EPXO is a high performance unit with a stainless steel flush diaphragm. It is designed for high temperature, high stability, and high sensitivity applications. The EPXO is offered in pressure ranges from 0 - 150 up to 0 - 7500 PSI in gage (vented), sealed gage, and absolute pressure. |  | M5100 MicroFused Pressure Transducer
The M5100 sets the price / performance standard for transducers used in demanding environments. The pressure port is machined from a solid piece of 17-4PH stainless steel. There are no O-rings, organics or welds exposed to the pressure media. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |  | MSP300 MicroFused Pressure Transducer
The MSP300 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. It is geared to the OEM customer using medium to high volumes. Available in ranges from 0 - 100 up to 0 - 10,000 PSIG. |  | MSP340 MicroFused Pressure Transducer
The MSP340 is similar to the MSP300, but features a smaller body diameter. Available in ranges from 0 - 50 up to 0 - 10,000 PSIG. |  | P1200 Pressure Transducer
The P1200 provides high accuracy pressure measurement of liquids and gases. It combines hybrid electronics with highly reliable strain gauge sensing technology to offer superior performance in rugged applications. Available in ranges from 0 - 75 up to 0 - 10,000 PSIG. |  | P900 Pressure Transducer
The P900 uses a 17-4 PH stainless steel diaphragm to sense pressure. The deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod, where the strain is measured by four foil strain gauges. Capable of sensing extremely small changes of applied pressure, it is relatively insensitive to vibration, attitude, and shock. Available in ranges from 0 - 75 up to 0 - 10,000 PSIG, with optional intrinsic safety. |  | U5100 UltraStable Pressure Transducer
The UltraStable™ technology employs a silicon-based strain gauge isolated by an oil-filled capsule and a stainless steel diaphragm. The U5100 features 100% 316L media isolation, excellent long term stability, and 0.1% FS combined accuracy. Available in ranges from 0 - 15 up to 0 - 10,000 PSI, in gage and absolute pressure. |  | US10000 UltraStable Pressure Transducer
The US10000 Series from MEAS is the first choice for applications requiring high accuracy in a rugged environment. The 0.05% accuracy and typical total error band of 0.25% provides a stable platform for test stands and high accuracy industrial pressure applications. Available in ranges from 0 - 5 up to 0 - 10,000 PSI, in gage and absolute pressure. |  | US300 UltraStable Pressure Transducer
The UltraStable™ technology employs a silicon-based strain gauge isolated by an oil-filled capsule and a stainless steel diaphragm. The US300 incorporates stainless steel isolation, and a wide range of standard pressure ranges and electrical outputs in a very compact package. Available in ranges from 0 - 15 up to 0 - 5,000 PSI, in gage and absolute pressure. |
| Rotary Position Sensors - Hall Effect | |  | NRH280 Noncontact Rotary Hall Sensor
Rotary position sensor that features a 2-piece unit - fully sealed sensor assembly and magnetized bolt. Single or dual outputs available. |  | SRH220DR Contactless Rotary Sensor
SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur. It is housed in an all-new moulded housing with separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected. |  | SRH280P & SRH280DP Contactless Rotary Position Sensor
For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68. |  | SRH500P Contactless Rotary Sensor
The SRH500P can meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, steelworks, marine equipment and power generating plants. This model has an option for environmental protection to IP69K. |  | SRH880P Submersible Contactless Rotary Sensor
The SRH880P has been specially developed to meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks and power generating plants. |  | TPS280DP Throttle Position Sensor
TPS280DP is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centers and is designed to interface with most common throttle body D type spindles. The sensor has a choice of 200 or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the FDR-25 sheathed spec 55A cable. With sealing to IP69K, it is also able to withstand high pressure wash-downs. | | Rotary Position Sensors - Inductive | |  | RSYN Rotary Position Sensor
RSYN angular position sensors are non-contact transducers that incorporate proprietary rotor and coil designs.The linear AC output represents the rotor shaft angle position providing the user with exceptional resolution even over very small angular ranges. |  | RVIT-Z Rotary Position Sensor
The unique design of the RVIT-Z incorporates the proprietary RVIT (Rotary Variable Inductive Transformer) technology and signal conditioning circuitry on a single PCB. The RVIT-Z provides an ultra low profile, high accuracy solution for rotary and angular measurements in OEM applications. | | Rotary Position Sensors - Magnetic Encoder | | | ED-18 Magnetic Encoder
The ED-18 Series magnetic encoder can be used as either a rotational feedback sensor or as a human machine interface (HMI) device. As a light duty feedback sensor it can provide rotation speed, direction or positioning information. The analog output provides absolute angular position information even when power is cycled on and off. As an HMI device it can be used as a rotary input control for use on instrumentation panels. | | ED-19 Magnetic Encoder
The ED-19 Series magnetic encoder is designed for medium duty feedback applications. Resolutions are available from 64 to 1024 counts per revolution. The magnetic technology used in the ED-19 series is plug-in compatible with existing encoder products, with the added advantages of an extended temperature range and fully sealed electronics. The ED-19 suffers no LED degradation, meaning it has a virtually unlimited life. | | ED-20 Magnetic Encoder
The ED-20 Series magnetic encoder is designed for medium duty industrial feedback applications with ball bearing supported shaft. Resolutions are available from 200 to 1024 counts per revolution. This encoder series also features line drivers with active termination for long cable runs and reverse voltage protection. The ED-20 also offers the option of high voltage differential, low voltage differential or open collector (NPN) outputs. | | ED-21 Magnetic Encoder
The ED-21 Series magnetic encoder is designed to replace traditional mechanical potentiometers. This product is offered with a ball bearing supported shaft. Five standard output ranges are available: 0.5 - 4.5v, 0 - 5v, 0 - 12v, 4 - 20mA and 0 - 20mA. The magnetic technology used in the ED-21 offers advantages over conventional electromechanical potentiometers with sealed electronics, extended temperature ranges, and virtually unlimited life. | | ED-22 Magnetic Encoder
The ED-22 Series magnetic potentiometer can be used to replace a conventional potentiometer. This product offers 270 degrees of electrical travel, integrated rotational stop system, 300 degrees of mechanical travel, utilizing a sleeve bearing and shaft fitted with an O-ring seal. The non-contact magnetic sensor design utilized in the ED-22 is well suited for industrial applications with temperature extremes, high vibration and shock, and contamination. | | Rotary Position Sensors - Potentiometers | |  | SRS280 Sealed Rotary Potentiometer
The SRS280 was developed to meet the harsh operating requirements of today´s automotive and motorsport markets. It uses hybrid potentiometer track technology, providing high stability under extremes of temperature and humidity |  | SRS880 Submersible Rotary Potentiometer
The SRS880 can meet the harsh operating requirements of applications such as construction, agricultural, military and utility vehicles, steelworks and power generating plants. This model can operate at a submerged depth of 2m (6.5 feet). |
 | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |  | DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration. |  | EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user. |  | LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors. |  | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. |  | SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors. |  | UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation. | | Signal Conditioning - Distributed IO | |  | ioPro Distributed IO
The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved performance. | | Signal Conditioning - Wireless | |  | EtherWave™ WE
The EtherWave WER allows you to build your own long-range, non-line-of-sight, point-to-point, or point-to
multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, IP Cameras, VoIP phones, digital signage, or access control / security systems. The EtherWave WER
offers the ideal combination of price, range, data rate, security, interference avoidance, quality-of-service, and
ease-of-use. |  | EtherWave™ WEB-900
The EtherWave WEB replaces costly wiring with a wireless Ethernet bridge that can enable remote Wi-Fi APs, Ethernet
pan/tilt/zoom security cameras, VoIP phones, or Internet kiosks. ioSelect’s product offers the ideal combination
of price, range, data rate, security, interference avoidance, quality-of-service, and ease-of-use. |  | EtherWave™ WER-900
The EtherWave WER allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | EtherWave™ WMR-900
The EtherWave WMR allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | ioPro™ WDL
The Wireless Data Link (WDL) adds seamless wireless capabilities to the ioPro Series. The WDL supports all the
ioPro operating modes, and more. With its industry leading 125Kbps over air data rate it can be used as a "Radio
Modem" for other demanding wireless serial applications. With its powerful radio (Up to 1 Watt) and high receiver
sensitivity the WDL can communicate effectively over long distances (up to 20 Miles with clear line of site), and has
the power to penetrate walls and other obstacles in shorter runs. |  | ReFlexIO™ Industrial Wireless Cable Replacement System
If you need to control or monitor a device or system at a distance, the ReFlexIO is the solution. It comes complete with 8 x onboard I/O that allow you to connect to almost any device. Use it monitor or control pumps, valves, PLC’s, dataloggers, rain gauges, tank levels, security systems, fire & evac systems, access control, irrigation systems, flow meters, emergency standby systems and more. | | Wireless Accessories
A complete set of accessories for creating a reliable and high performance wireless system. |
| Software - Data Analysis Software | |  | GlyphXE Analysis Software
Integrated and powerful analysis methods for post-processing of your measured data make GlyphXE the technically mature, professional tool for your test projects. At the same time, GlyphXE convinces through maximum ease of use - even for occasional users. GlyphXE provides a graphical user interface that enables you to develop individual analyses and computations step by step. No programming knowledge or learning of a special script language is required. |  | InField Software
InField is a versatile field analysis software program optimized for use with SoMat hardware. It is designed to enhance the field test collection and data visualization process by making sure you never leave the field without the numbers you need. | | Software - Fatigue & Durability Software | |  | Automation Software
nCode Automation captures, manages, distributes, and performs in depth-analyses of time-dependent data within a common, collaborative environment. It is a web-based system - simple to deploy, configure and use. No software coding is required and nCode Automation is hardware independent. Complex analysis process can be developed using GlyphWorks on the desktop and uploaded to the nCode Automation server. Queries and reports can be readily based on all the analysis results. Detailed bespoke web reports are now possible on all engineering data, without having to move large data files around IT networks. |  | GlyphWorks
nCode GlyphWorks is the leading data processing system for engineering test data analysis. Designed to handle huge amounts of data, GlyphWorks provides a graphical, process-oriented environment. Users can simply create an analysis workflow by ‘drag and dropping’ analysis building blocks. | | Software - Measurement Software | |  | Catman AP Software
Benefit from the new generation of data acquisition software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP. |  | Catman Easy Software
With catman®Easy you can perform a large number of different measurement tasks quickly and simply... without wasting time or effort on programming. Thanks to the optimal interaction between hardware and software, you can configure your amplifier much faster. You can also quickly define your measurement parameters such as sampling rates, trigger settings, as well as select your preferred visualization mode. |  | Catman Enterprise Software
The catman®Enterprise software suite was specifically developed for high channel-count measurement using the MGCplus DAQ system. A dedicated measurement-data server (MDS) performs the actual measurement. You can connect a number of client PCs to simultaneously access data on the MDS server. This enables you to monitor and evaluate your high channel-count measurement processes in real time. |  | Catman Professional Software
Catman®Professional enables you to easily configure connected amplifiers and intuitively define, run and automate your measurement sequences without any programming knowledge. Measured values can be visualized in real time or after measurement has been concluded for reporting purposes. Recurring measurement tasks are greatly simplified as catman® can be used to automate each sequence. |  | Perception Software
Perception is a modularly structured software package for high speed measurement data acquisition and it accomplishes all tasks in the measurement sequence: Parameterization of sensors and control of measurement instruments, Real-time display of measured values, Storage and playback, and Analysis and report generation. The special features in Perception enable rapid setup times, rapid familiarization and therefore the immediate start of the measurement campaign. |  | Perception Software - advanced exports
For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular programs. Extensive built-in set-up options let you export the data of interest the way you want, and nothing more. In addition, these exports can be combined with the powerful automation and post processing features included as standard in Perception. |  | Perception Software - analysis
Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The formula results can be re-used in other formulas to get even more advanced answers. |  | Perception Software - basic FFT
The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore the user can obtain valuable information about the content of mixed signals like vibrations, shocks or noisy signals beyond what is visible in a time domain display. |  | Perception Software - HPHV automated analysis
The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate
reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately and in an automated manner. |  | Test Control Environment (TCE) Software
SoMat Test Control Environment (TCE) is the Microsoft Windows-based® test control and setup interface software that is supplied with every eDAQ and eDAQ-lite data acquisition system. |
| Speed Measurement - Encoders | | | 380 Quad Rotary Shaft Encoder
Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals. | | Speed Measurement - Speed to Analog Signal Conditioners | |  | AIFO-200 Analog to Frequency Conversion Module
The AIFO-200 is an interface device used between an analog signal and a frequency-input device typically used in applications where a process is monitored by a transducer, PLC, PC, or some other device that provides a 0–10 Vdc or 4–20 mA signal. |  | SA420 Digital Signal Conditioner
The Electro-Sensors SA420 Signal Conditioner is a complete system which provides an analog signal directly proportional to the speed of a monitored shaft. |
| Strain Gauges - Accessories | |  | LS Solder Terminals
Terminal strips for mounting the strain gauge leads and connecting cabling. |  | RMS1 Cleaning Solvent
Satisfactory bonding joints are only achieved if the adhesive covers the bonded surfaces well. Therefore, the application surfaces must be cleaned prior to bonding with a chemically pure solvent and a clean cleaning pad. RMS1 is an environmentally friendly mixture of Isopropanol and Acetone which dissolves all normal contamination. | | Strain Gauges - Adhesives | |  | EP150 Hot-Curing Single Component Adhesive
Epoxy resin adhesive that can be used with all types of strain gauges. Storage time(dry): 12 months in refrigerator (+7°C). Application temperature range: -70°C ... +150°C with zero-point related measurements (static) and with non zero-point related measurements (dynamic). |  | X60 Cold-Curing Two Component Adhesive
X60 is a 2-component fast curing adhesive, consisting of a liquid component (B) and a powder (component A). Typical application fields are: low temperature, porous materials as well as for securing the cables. | | Strain Gauges - Optical Strain Gauges | |  | Optical Strain Gauges
Benefit from the many new advantages of measuring with light - without having to abandon the ruggedness and convenience of the classical strain gauge. HBM's optical strain gauges are made from fibers of glass with a very small core diameter of no more than 5 micrometers. In comparison, the diameter of human hair ranges from 60 to 80 micrometers. The fiber core is surrounded by a cladding layer from purest glass with a diameter of 125 micrometers. | | Strain Gauges - Protective Coatings | |  | ABM75 Aluminum Foil c/w Kneading Compound
ABM75 is an aluminum foil c/w kneading compound for sealing. Recommended to use in conjunction with AK22. Supplied in 11 pcs of 205mm x 100mm. |  | AK22 Viscous Putty
AK22 is a tough, kneadable putty, strongly adhering on nearly every material. At very high accelerations (e.g. stroke or fast rotation) the AK22 may move its position because of its high mass. AK22 does not harden so there is no question of its hindering movement at the gauge area. An optimum protection can be reached by putting a layer of ABM75 on top of the AK22. | | Strain Gauges - Strain Gauges | |  | C Series Strain Gauges
The specialist for extreme temperatures. |  | LE11 Encapsulated Strain Gauge
Encapsulated strain gauge with stranded wire - moisture proof and resistant against chemicals. |  | V Series Strain Gauges
Encapsulated strain gauges with 3m stranded connection wire. |
 | HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP |  | TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle. |  | TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically. |
| Temperature - Temperature Transmitters | |  | TT-420 Temperature Sensors
TT420 temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs. |  | TT-420-LT Temperature Sensors
TT420-LT temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs | | Temperature - Thermopiles | |  | TS105-1 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 1000±4 Ohms @ 0°C. |  | TS105-10 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter and resistance 100 kOhm ±5% @ 25°C |  | TS105-2 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 43±8 kOhm @ 25°C |  | TS105-3 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 8-14µm wide band pass filter, and resistance 1000±4 Ohm @ 0°C |  | TS105-4 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 8-14µm wide band pass filter, and resistance 43±8 kOhm @ 25°C. |  | TS105-6 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 100 kOhm ±3% @ 25°C. |  | TS105-8 Thermopile Sensor
Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. The TS105-8 has a linear array with 8 pixels. Features silicon lens f=3.9mm, and resistance 5 to 40 kOhm @ 25°C. |
 | AAL2 Dual Axis Inclinometer
The AAL2-Series conductive inclination sensor offers a full calibrated inclination sensor module on a PCB. The sensor provides voltage output depending on the inclination angle and related to the specific axis, as well as a voltage based temperature output signal. An optional integrated e2-prom contains data on the characteristic curve resp. calibration data. Available in various ranges up to ±30° |  | AccuStar Electronic Clinometer
The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. Designed for easy integration, with a choice of analog, ratiometric, digital or serial models, the clinometer produces an output signal corresponding to direction and magnitude of angular displacement. Features a linear range of ±45°. |  | AccuStar II - DAS20 Dual Axis Clinometer
AccuStar® II/DAS-20 combines the function of two clinometers in one package. The unique dome shaped design features a capacitance based sensor which produces output signals directly proportional to the relative tilt in two axes. There are four output connections providing a choice of ratiometric, pulse width modulation (PWM) digital output. Features a range of ±20° |  | AccuStar IP-66 Clinometer
The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. Available in various ranges up to ±45° |  | D-series Dual Axis Inclinometer
The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals. |  | DPL2 - DPN2 Dual Axis Inclinometer
The DPL2/DPN2-Series Inclinometer offers a dual axis conductive inclinometer as a PCB level. This inclinometer provides the user modern microprocessor technology with an active linearization and temperature compensation. Available in various ranges up to ±30° |  | LCF-2000 Inclinometer
The JEWELL LCF 2000 Series Inclinometer is a two axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | LCF-3000 Inclinometer
The JEWELL LCF 3000 Series Inclinometer is a three axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | LCI Inclinometer
The Jewell LCI Series Inclinometer is a ±14.5º to ±90º device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis. |  | LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies. |  | LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series. |  | NS-10E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±10° and a voltage output. |  | NS-10G Inclinometer Switch
This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°. |  | NS-15CAN Dual Axis Inclinometer
The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. Available with digital output signals via CANopen, and a range of ±15°. |  | NS-15DPG2-RXG Dual Axis Inclinometer
The DPG Series dual axis conductive inclinometer in aluminum housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. Features a range of ±15° |  | NS-15E Inclinometer
The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±15° |  | NS-15E Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±15° and a voltage output. |  | NS-25DQG2-XUA Dual Axis Inclinometer
A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°. |  | NS-25DQL2-IXA Dual Axis Inclinometer
The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25° |  | NS-45E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±45° and a voltage output. |  | NS-5E Inclinometer
The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±5° |  | NS-5E2 Inclinometer
This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±5° and a voltage output. |  | NS-P Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. They feature an aluminum baseplate and IP 65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. |  | NS-V Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°. |  | STT280 Sealed Tilt Sensor
The STT280 is provided in an extremely compact housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems. |  | STT500 Sealed Tilt Sensor
The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems. | | Tilt Sensors & Inclinometers - Digital Protractors | |  | AngleStar Electronic Protractor System
The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable. There are three systems to choose from: ±19.99 degrees with a 0.01 degree resolution, ±45°, or a +90° with 0.1 degree resolution. |  | DP-45 AngleStar Digital Protractor
The AngleStar® Digital Protractor Model DP-45 provides instant digital display of level, angle and tilt. Consists of a rugged electronic sensor, custom circuitry and liquid crystal display in an easy-to-use, hand held battery powered package. Features a range of ±45°. |
| Torque Sensors - Non-Contacting / Torque Flanges | |  | CS-T-08 Flexplate Torque Transducer
Special Torque Transducer which replaces the original flexplate |  | T10F Torque Flange
The T10F torque flange is the first torque flange representative. The T10F uses shear stress as a measure of torque for the first time, a measurement principle for which HBM applied for patent. Available in ranges from 50 N·m up to 10 kN·m. |  | T10FH Torque Flange
The T10FH is a torque flange that can measure torques from 100 kN·m up to 300 kN·m – with the proven accuracy and reliability of the successful T10F product family. To achieve the goal of improved productivity and efficiency the T10FH is the ideal solution for power test benches for ship’s main engines or tests in the off-shore industry. |  | T10FM Torque Flange
The T10FM torque flange can measure torques up to 80 kN·m. It is based on a modified T10F measuring body and also uses the shear stress principle of measurement. The measuring body and the torque introduction part are made from one piece. Its extremely short design takes up less space in the test rig and thus saves money. The high permissible transverse forces allow projecting machine elements to be directly connected. |  | T10FS Torque Flange
The T10FS torque flange adds to the outstanding market reputation of the T10F torque flange, extending the range covered to greater accuracy, higher speeds and smaller outside diameters. It is based on a modified T10F measuring body and also uses the shear stress principle of measurement. Available in ranges from 100 N•m up to 10 kN•m. |  | T12 Digital Torque Flange
Uses modern fieldbus systems (CANopen, PROFIBUS DPV1) for connecting directly to PLC automation systems. Provides a frequency & analog output. Fit for use with conventional technologies. |  | T40 Torque Flange
Saves space & costs due to its short design. Allows high parasitic loads enabling machine elements to be directly mounted. Has no slip rings or bearings. Available from 200 N·m to 10 kN·m. |
| Vacuum Pressure Sensors - Piezo Resistive Vacuum Sensors | |  | HPM-760S Piezo Vacuum Transducer Module
The HPM-760S is an accurate vaccum sensor with a range of 0.1 to 999 Torr. It has a fast response and provides repeatable measurements. | | THPS-760 Plus Digital Vacuum Controller
The THPS 760 Plus Vacuum Controller is an exceptionally stable, accurate and repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 41/2 digit meter indicates in 0.1 Torr units from 0.1 to 1000.0 Torr. Designed for use with the HPM-760S vacuum sensor. | | Vacuum Pressure Sensors - Thermocouple Vacuum Gauge Tubes | | | CVT Analog Vacuum Controller
CVT Vacuum Controllers are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers operate in the same standard ranges as the VT meters with the addition of single or double user selectable control limits. Includes durable 10A SPDT control points. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |  | Digital AVC Vacuum Controller
The Teledyne Hastings Instruments (THI) Digital AVC (DAVC) is a microprocessor controlled vacuum gauge meter without readout. In addition to the analog output (0-1 VDC), pressure measurements can be accessed by an RS232 serial port using Torr, mbar or Pa. Operates with DV-4 and DV-6 series vacuum gauge tubes. | | Digital CVT Vacuum Controller
The Digital CVT instrument is a fully automatic, continuous-reading instrument for vacuum applications. These controllers operate in the same standard ranges as the Digital VT meters with the addition of two user selectable control limits. Includes durable 10A SPDT control points. and a (0-1 volt) nonlinear analog output signal & a digital RS232 port as standard. Operates with DV-4 and DV-6 series vacuum gauge tubes. | | Digital VT Vacuum Indicator
The Digital VT instrument is a fully automatic, continuous reading instrument for basic vacuum measurement applications. Packaged in 1/8 DIN panel mounted case with 3 digit green LED display. Operates with DV-4 and DV-6 series vacuum gauge tubes. | | HPM 4-6 Portable Vacuum Indicator
The Model HPM 4/6 is a compact, hand-held, digital display, battery operated control unit. When combined with the Teledyne Hastings Instruments (THI) rugged thermopile sensors it becomes a vacuum instrument designed for portability and ease of use in applications where AC power is not readily available. Operates with DV-4 and DV-6 series vacuum gauge tubes. |  | Thermocouple Vacuum Gauge Tubes
Teledyne Hastings, manufacturer of the original DV-4 and DV-6 thermocouple vacuum gauge tubes, produces vacuum measurement equipment with exceptional stability, accuracy and reliability under the most demanding conditions. These vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available from the factory. |  | Vacuum Reference Tubes
The Teledyne Hastings Instruments (THI) Reference Tube is an evacuated, sealed vacuum gauge tube accurately calibrated to precisely simulate a gauge tube at a given operating pressure. It is electrically equivalent to the metal and glass gauge tubes used with THI instruments. It permits quick and easy recalibration of THI Vacuum Gauge Indicators. | | VT Analog Vacuum Indicator
VT-Series Vacuum Gauges are available in three standard ranges: 0-100 mTorr, 0-1000 mTorr, and 0-20 Torr. A self-contained gauge circuit is attached to the rear of the direct reading meter. Supplied as panel mount device with optional cabinet enclosue. Operates with DV-4, DV-5, and DV-6 series vacuum gauge tubes. |
| Weighing - Electronics | |  | HBM Weighing Electronics
HBM supplies weighing electronics for all industrial platform scales, truck or container scales. In addition HBM offers electronic systems for process automation, e.g. for checkweigher and dosing process. |
|
|
|
|
|
|
|