|
|
|
 |
|
|
|
Military applications for sensor technology include the development of transportation systems (eg. tanks and aircraft), weaponry and communication and monitoring systems. |
|
|
 Products |
| |
 | 3700 Shock Accelerometer
The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. Available in ranges from ±50g to ±6000g. |  | 3801A Accelerometer
The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. Available in ranges from ±2g to ±2000g. |  | 4600 Accelerometer
The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4602 Accelerometer
The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4604 Accelerometer
The Model 4604 is a rugged, low-profile MEMS accelerometer designed for both static and dynamic applications. The device offers outstanding thermal performance and features a robust strain relief and cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4605 Accelerometer
The Model 4605 is designed for both static and dynamic measurements in critical and demanding applications. The device offers outstanding thermal performance and features a detachable cable. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4610 Accelerometer
The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4620 Accelerometer
The Model 4620 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device incorporates a Teflon insulated cable with a rugged strain relief designed for demanding applications. Provides an amplified output. Available in ranges from ±2 to ±250g. |  | 4623 Accelerometer
The Model 4623 is a low frequency DC response accelerometer offering outstanding performance over a wide operating temperature range. The device features EMI/EMC protection circuitry and a rugged strain relief for harsh installations. Provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4801A Accelerometer
The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output, enhanced temperature compensation, and shock protection up to 10,000g. Available in ranges from ±2 to ±500g. |  | 4803A Triaxial Accelerometer
The Model 4803A is a low noise triaxial accelerometer in a rugged, welded stainless steel package. The silicon MEMS accelerometer incorporates integral temperature compensation and provides an amplified output. Available in ranges from ±2 to ±500g. |  | 4810A Accelerometer
The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package. It features a detachable cable, temperature compensation, and a signal conditioned output. Available in ranges from ±2 to ±500g. |  | 7100A IEPE Accelerometer
The Model 7100A is a high performance IEPE accelerometer with an operating temperature range of -55°C to +150°C. It is hermetically sealed and features the popular through hole mount installation. Available in ranges from ±50 to ±500g. |  | 7101A IEPE Accelerometer
The Model 7101A is a miniature, high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz. |  | 7104A IEPE Accelerometer
The Model 7104A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a side mount 10-32 coaxial connector. |  | 7105A IEPE Accelerometer
The Model 7105A is a high performance IEPE accelerometer available in ±50g to ±500g dynamic ranges. The stud mounted accelerometer features a welded hermetic construction with a top mount 10-32 coaxial connector. |  | 7108A IEPE Accelerometer
The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a coaxial 10-32 top connector. |  | 7132A Triaxial IEPE Accelerometer
The Model 7132A is a miniature triaxial IEPE accelerometer available in ±50g to ±2000g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. |  | 7204A IEPE Accelerometer
A case isolated high temperature IEPE accelerometer with internal shielding. Has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. Available in ±50 to ±500g ranges. |  | 7500A Charge Accelerometer
The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has charge output of 20pC/g, and provides stable thermal response up to +260°C. Available in ±250g up to ±2000g dynamic range. |  | 7501A Charge Accelerometer
The Model 7501A is a miniature piezoelectric charge mode accelerometer with an operating temperature range to +260°C. It is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >15kHz with 5.6pC/g nominal output. Available in ±2000g dynamic range. |  | 7502A Charge Accelerometer
The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It has a charge output of 1.6pC/g, and provides stable thermal response up to +200°C. Available in ±2000g dynamic range. |  | 7508A Charge Accelerometer
The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. With a nominal charge output of 5.6pC/g the model 7508A offers a high signal to noise ratio in a miniature package. Available in ±2000g dynamic range. |  | 7514A Charge Accelerometer
The Model 7514A is a stud mounted piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g. Available in dynamic ranges of ±500g to ±2000g. |  | EGAX & EGAXT Accelerometers
The Model EGAX/EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGCS-L High Amplitude Shock Accelerometer
The Model EGHS-L is a high amplitude piezoresistive shock accelerometer designed for transient shock testing. Available in ±30,000g and ±60,000g ranges, it is packaged in a rugged welded stainless steel housing. |  | EGPE-1A IEPE Accelerometer
The model EGPE-1A is a high performance IEPE type accelerometer with an operating temperature range up to +150°C. It is available in ±10g to ±500g ranges and provides a flat frequency response up to 15kHz. |  | EGPE-2A Charge Accelerometer
The model EGPE-2A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. It provides stable thermal response up to +260°C, and features the popular through hole mount installation. Available in ±50g to ±2000g dynamic range. |  | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. | | Accelerometers - Angular Accelerometers |  |  | ASB Angular Accelerometer
The JEWELL ASB Series Angular Accelerometer is a general purpose devise made for industrial, commercial, and aerospace sensing requirements. Its many applications include antennae stabilization, torque measurement, flight control systems, automotive testing, and optical system stabilization. |  | ASXC Angular Accelerometer
The Jewell ASXC Series Fluid Rotor Angular Accelerometer is a force balamnce servo accelerometer that uses a fluid-filled ring chamber to measure angular acceleration. The ASXC Angular Accelerometers are designed to be small and lightweight, are extremely repeatable, and offer a very high output with excellent accuracy and stability. | | Accelerometers - Board Level / OEM | |  | 3022 Accelerometer
The Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3028 Accelerometer
The Model 3028 is a piezoresistive silicon accelerometer packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. Available in ranges from ±2g to ±200g. |  | 3031 Accelerometer
The Model 3031 is a piezoresistive SMD accelerometer designed for demanding high volume applications. Available in ranges of ±50g and ±100g. |  | 3038 Accelerometer
The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. Available in ranges from ±50g to ±6000g. |  | 3052 Accelerometer
The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3058 Accelerometer
The Model 3058 is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g. |  | 3255 Accelerometer
The Model 3255 is a two-chip accelerometer designed for surface mount applications. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±25g to ±100g. |  | 4503 Accelerometer
The Model 4503 is an economical board mountable accelerometer. The output is signal conditioned and temperature compensated. Available in ranges from ±2g to ±200g. |  | 4655 Accelerometer
The Model 4655 is a signal conditioned, hermetically sealed, board mountable MEMS accelerometer. The accelerometer incorporates integral temperature compensation and a frequency response from DC to 2000Hz. Provides an amplified output. Available in ranges from ±2 to ±200g. |  | ACH-01 Accelerometer
The ACH-01 is a low cost, robust, general purpose accelerometer with outstanding performance characteristics. It is specifically designed for high volume applications that require the permanent installation of an accelerometer. |  | EGHS-M High Amplitude Shock Accelerometer
The Model EGHS-M is a high amplitude piezoresistive shock accelerometer designed for embedded applications. The accelerometer is available in ±30,000g and ±60,000g ranges. | | MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. |
 | K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy. |
| Data Acquisition - Genesis HighSpeed - Power and Isolation products | |  | BE3200 Test Sequencer
The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. It replaces traditional electromechanical systems with microprocessor precision. Up to 32 optically-isolated outputs are available, with extensive interlocking and safety features. Windows software provides control in milliseconds, cycles or degrees of phase via an optically-isolated serial port. | | Data Acquisition - High Speed - Genesis | | | BE3200 Test Sequencer
The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. It replaces traditional electromechanical systems with microprocessor precision. Up to 32 optically-isolated outputs are available, with extensive interlocking and safety features. Windows software provides control in milliseconds, cycles or degrees of phase via an optically-isolated serial port. |  | GEN2i High Speed - Portable Data Recorder
GEN2i is a revolutionary new portable data recorder, offering incomparably powerful features and an exciting touchscreen user interface. With up to 16 input channels, fully configurable to your needs, it provides both continuous direct-to-disk as well as fast transient recording. | | Data Acquisition - Laboratory Universal Data Acquisition | |  | MGCplus Data Acquisition System (overview)
With more than 100,000 channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. Supports a wide spectrum of transducers, fieldbus connections and standard PC interfaces. It is the choice for almost all industrial, laboratory and R&D measurement applications. Capable to measure force, displacement, pressure, temperature, torque, acceleration, strain, stress, voltage, current, frequency or resistance - at low or high speeds. |  | APxx Connection Boards for MGCplus
Connection boards for single channel or multi-channel amplifiers. Also connection boards for special-function modules. |  | Cpxx Communication Processors for MGCplus
Outstanding performance and use of standard PC interfaces distinguish the communication processors CP22 and CP42 for MGCplus. Both allow the assembly of networks: An important condition if data acquisition systems with more than 1,000 active channels should assembled. |  | ML38 High-precision Single-channel Amplifier Module for MGCplus
The ML38B precision amplifier provides a high resolution of 1,000,000, an accuracy of 0.0025% and an excellent long-term stability. |  | MLxx Amplifier & Communication Modules for MGCplus
Single-channel and multi-channel amplifer modules, and special-function modules for the MGCplus system. | | Data Acquisition - Rugged/Mobile - eDAQ | |  | eDAQ-lite Rugged Mobile DAQ
The eDAQlite is the go anywhere, test anything compact version of the SoMat eDAQ. Engineered using the same technology, the eDAQlite has similar leading-edge signal conditioning and a capacity to perform a broad range of on-board data processing, triggering, intelligent data storage, and complex computations. There is no learning curve, new software, or file formats; and systems can be seamlessly networked together. |  | EBRG eDAQ Bridge Layer
The SoMat eDAQ Bridge Layer (EBRG) offers 16 simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including: strain gauges, accelerometers, pressure transducers, load cells, and other general analog signals. |  | ECOM eDAQ Vehicle Network Communications Layer
The SoMat eDAQ Vehicle Network Communications Layer (ECOM) offers (3) CAN device interfaces, (1) Vehicle Bus Module (VBM) interface and a GPS communications port. It is an extremely versatile layer providing a direct correlation between vehicle bus channels with physical data (analog, thermocouple and frequency) as well as GPS. |  | ECPU-PLUS Main Processor for eDAQ
For the system that defines Rugged, Mobile Data Acquisition, it all starts here. The SoMat eDAQ Base Processor (ECPU-PLUS) is the foundation eDAQ systems are built from. Specifically designed for these applications; input power for the system operates in a wide range from 10-60 VDC. Internal back-up batteries also protect the eDAQ from unplanned power losses or low voltage events. |  | EDIO eDAQ Digital Input-Output Layer
The SoMat eDAQ Digital Input/Output Layer (EDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The EDIO offers twenty four channels that can be used as digital inputs/outputs with twelve additional channels for wide range inputs. |  | EHLS eDAQ Simultaneous High Level Layer
The SoMat eDAQ Simultaneous High Level Layer (EHLS) offers 16 simultaneously sampled high-level differential analog inputs through independent connectors. Up to four EHLS layers can be added to a single eDAQ system enabling up to 64-channels. Networking multiple eDAQ’s make synchronous EHLS channel counts virtually limitless. |  | EITB eDAQ Isolated Thermocouple Layer
The SoMat eDAQ Isolated Thermocouple Layer (EITB) measures temperatures on 8-channels of isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the EITB is available in the four most common calibration types (J, K, T and E). Each channel has individual cold junction compensation with isolation to 500V. |  | ENTB eDAQ Non-Isolated Thermocouple Layer
The SoMat eDAQ Non-Isolated Thermocouple Layer (ENTB) measures temperatures on 32-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with the four most common calibration types (J, K, T and E). Each channel is individually software-selectable between these calibrations. |  | eDAQ Rugged Mobile DAQ
Sets the standard for rugged, mobile data acquisition; a stand-alone sealed system designed for testing in the harshest of environments. |  | ELBAT-2 eDAQ-lite Battery Layer
The SoMat eDAQ-lite Battery Layer (ELBAT-2) is located below the eDAQ-lite in a machined aluminum enclosure. It attaches with four 8-32 screws to the base plate of the eDAQ-lite replacing the rubber feet. The feet can be relocated to the battery layer for mounting purposes. A short cable, with the eDAQ D-Sub power connector, connects to the eDAQ-lite and is also utilized for charging purposes. |  | ELBRG eDAQ-lite Bridge Layer
The SoMat eDAQ-lite Bridge Layer (ELBRG) offers four simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including: strain gauges, accelerometers, pressure transducers, load cells, and other general analog signals. |  | ELCPU eDAQ-lite Base Processor
The SoMat eDAQ-lite Base Processor (ELCPU) is the foundation eDAQ-lite systems are built from. Specifically designed for rugged, mobile applications; input power for the system operates in a wide range from 10-60 VDC (with ELCPU-PLUS option). Internal back-up batteries also protect the eDAQ-lite from unplanned power losses or low voltage events. |  | ELDIO eDAQ-lite Digital Input-Output Layer
The SoMat eDAQ-lite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The ELDIO offers eight channels that can be used as digital inputs/outputs with four additional channels for wide range inputs. |  | ELHLS eDAQ-lite Simultaneous High Level Layer
The SoMat eDAQ-lite Simultaneous High Level Layer (ELHLS) offers 4 simultaneously sampled high-level differential analog inputs through independent connectors. Up to eight ELHLS layers can be added to a single eDAQ-lite system enabling up to 32 channels. Networking multiple eDAQ’s make synchronous ELHLS channel counts virtually limitless. |  | ELNTB eDAQ-lite Non-Isolated Thermocouple Layer
The SoMat eDAQ-lite Non-Isolated Thermocouple Layer (ELNTB) measures temperatures on 16-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with the four most common calibration types (J, K, T and E). | | Data Acquisition - Rugged/Mobile - Liberty | |  | Liberty Rugged Portable High Speed DAQ
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Liberty Rugged Portable High Speed DAQ (data sheet)
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Accelerometer Digitizer
Each module contains a 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. Integrated programmable excitation of 1 mA to 15 mA @ 28 V nominal. |  | Bridge Plus Digitizer
Each module contains a 16-bit digitizer on each channel with 2mV-10V full scale ranges, 6-pole Butterworth 20kHz Anti-alias filter, and a selectable Bessel or Butterworth FIR digital filter. Integrated excitation is 0 to 10V bipolar, 30mA. Includes bipolar shunt and monitor output. |  | CANbus Digital Input Card
Each module has one or two CAN nodes plus 32 digital inputs including counter/timer, frequency, RPM and quadrature encoder channels. |  | DC-32 and TC Digitizer
The DC-32 module contains a 10kS/s, 16-bit digitizer on each of 32 channels with 1V to 5V ranges F.S. |  | General Purpose Digitizer
Each module contains a 100kS/s, 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. | | Data Acquisition - Rugged/Mobile Thermocouple Module - cDAQ | |  | cDAQ Rugged Mobile Thermocouple Module
Engineered to operate within severe temperatures ranges of -40 to 125 °C with an IP 67 degree of protection, rating; the compact cDAQ modules allow users to take measurements directly in the most difficult test objects. It is available in 16-channel configurations for K-, J- or T-type thermocouples. | | Data Acquisition - Universal Data Acquisition | |  | QuantumX MX440A 4-channel Universal Amplifier
4 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX878 Transmitter with 8 analog voltage outputs
The MX878 transmitter enables scaled measurement signals to be monitored in a standardized unit of measurement or transmitted to other systems to allow flexible and efficient data analysis. In addition, signals can be set off against each other using algebraic operations. The module also features functions for peak value analysis. |
 | 9830 Digital Indicator
Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9834 Digital Indicator
For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector. |  | 9840 Intelligent Digital Indicator
The 9840 is suitable for use in calibration labs, field service, or anywhere high accuracy is important. Features include a bipolar 6-digit 2-line display, remote sense, low noise, 22-bit resolution, USB port with RS232 communication, mV/V calibration and the ability to store up to 25 different sensors. 6-point linearization, unit conversion, front-panel tare. Self calibration via TEDS Plug & Play ready IEEE1451.4 compliance. |  | 9850 Multi-Channel Digital Indicator
The model 9850's modular design allows the use of 7 different types of channel cards in 2 available channels. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging. |  | 9860 Digital Indicator
Similar to the 9830 indicator, but with TEDS functionality. |
 | HM1500LF Humidity Sensor
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply. |  | HM1520 Humidity Sensor
HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply. |  | Humidity Sensors (overview)
Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve control and output. |
 | JC1500 Rugged Single Axis Contactless Joystick
The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options. |
| Linear Position Sensors - Hall Effect | |  | VPT210 Valve Position Transducer
The VPT210 spool feedback sensor has been designed for the hydraulic spool valve market - particularly for new generation hydraulics fitted to on- and off-highway vehicles. | | Linear Position Sensors - LVDT | |  | AF111 LVDT Displacement Transducer
Suitable for clamp mounting, the AF111 has a threaded, unguided core assembly to simplify installation. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy. |  | AF145 LVDT Displacement Transducer
The AF145 features self-aligning rod end bearings for mounting. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy ratiometric operation. |  | M-12 LVDT
The new M-12 series coil design has been optimized to provide the best possible temperature coefficient of sensitivity, while maintaining suitability for operation with extended cable lengths. A seamless 400 series stainless steel case provides magnetic shielding for the noisiest electrical environments. Available ranges are from ± 5 mm to ± 150 mm. |  | MHR Miniature LVDT
The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation assembly. High sensitivity results from close electrical coupling between coil and core. A magnetic stainless steel housing provides electromagnetic and electrostatic shielding. |  | XS-ZTR Nuclear Radiation Resistant LVDT
The XS-ZTR Series LVDT is designed for measuring displacement at very high and cryogenic temperatures. The XS-ZTR operates continuously at 550°C and will survive 650°C for several hours. The XSZTR is also designed to perform within specification after exposure to a total integrated flux of 1011 rads gamma or 3 x 1020 NVT. |
| Load Cells / Force Transducers - Load Buttons | |  | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. | | Load Cells / Force Transducers - Low Profile Load Cells | |  | 2451-2461 Stainless Steel Compression-Only Load Cell
Interface has developed the new compact compression only 2451/2461 for applications requiring a very small footprint. The 2451 comes in 3 capacities, 50, 75, and 100K, each only 4.5” in diameter. The 2461 comes in 2 capacities, 150 and 200K, each only 5.5” in diameter. |  | 3200 Standard Stainless Steel Load Cell
The 3200 has all the features of the Interface Model 1200 Low Profile only is stainless steel and hermetically sealed for harsh applications. Available in capacities from 2.5K lbf. to 100K lbf. | | Load Cells / Force Transducers - Miniature | | | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. | | Load Cells / Force Transducers - OEM | |  | FC23 Compression Load Cell
The FC22 is a compression load cell that can measure ranges from 0 - 250 up to 0 - 2000 lbf. Typical applications include batch weighing, robotics end-effectors, variable force control, load and compression sensing, assembly line force measurement, pumps, hoist and winch loads, and weighing. | | Load Cells / Force Transducers - Piezoelectric | |  | PACEline Piezoelectric Force Transducers (overview)
Your fitting and assembly processes are fast and space is a constraint. But you still expect consistently reliable quality control for your production. It’s time for PACEline. Compact and highly dynamic force measurement technology from HBM that makes the difference – and brings fresh impulses to piezo technology. |  | PACEline CFT Piezoelectric Force Transducer
CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic press-fit and assembly processes with fast force variations. |  | PACEline CFW Piezoelectric Force Washer
Thanks to their compact design CFW force washers can be used in many different applications, including adverse industrial environments. Presently available with nominal (rated) forces of 50 kN and 140 kN. Since the output signal is not dependent on the measuring range but on the force applied, CFW force sensors withstand very high overloads. |  | PACEline CMA Charge Amplifier
The PACEline CMA charge amplifier (analog amplifier) ensures reliable transmission of data from piezoelectric force transducers. This is done by signal conditioning to +/-10 V analog standard signals. |  | PACEline CMC - The piezoelectric force measurement chain
CFT piezoelectric force transducers and CMA analog amplifiers are combined to form a calibrated unit. Even with the most challenging task in your process monitoring: The CMC measurement chain keeps pace at any time. |  | PACEline CMD Digital Charge Amplifier
The digital charge amplifier for piezoelectric sensors assures multiple uses in many applications in the laboratory and production. The CMD600 measures very fast force, torque and pressure signals at frequencies of up to 30 kHz and can be used with piezoelectric sensors up to max. 600,000 pC (Pico coulombs). | | Load Cells / Force Transducers - Specialty | |  | EL20-S458 Belt Tension Load Cell
The EL20-S458 is a seat belt tension load cell, typically used for automotive crash test, military payload delivery, sport and military parachute tether loads, and automatic reserve chute deployment systems. Available in capacities of 1K lbf. to 3.2K lbf. |
| Piezo Film - Piezo Film Elements | |  | DT Series
The DT Series of piezo film sensors elements are rectangular elements of piezo film with silver ink screen printed electrodes. They are available in a variety of different sizes and thicknesses. |  | DT Series with Lead Attachments
The DT Series of piezo film sensors elements are rectangular elements of piezo film with silver ink screen printed electrodes, and leads attached. They are available in a variety of different sizes and thicknesses. | | Piezo Film - Piezo Switches and Ultrasonic Sensors | |  | NDT1-220K Ultrasonic Transducer
The NDT1-220K element offers outstanding ultrasonic transducer performance in a low-cost, flexible format for general-purpose use. The transducer is robust, and conforms perfectly to cylindrical surfaces such as pipe or tank walls. |
| Pressure Sensors & Transmitters - Board Mountable / OEM | |  | 17 UltraStable Pressure Sensor
The Model 17 Ultrastable is a high performance, temperature compensated, piezoresistive silicon pressure sensor packaged in TO-8 configurations. It uses Measurement Specialties’ proprietary ultrastable die to provide excellent performance and long-term stability over wide temperatures. Gage and absolute pressure ranges from 0-15psi to 0-250psi are available. |  | 27 UltraStable Pressure Sensor
The Model 27 is a high performance, temperature compensated, piezoresistive silicon pressure sensor packaged in a bottom tube TO-8 configuration. It provides excellent performance and long-term stability. Gage pressure ranges from 0-15psi to 0-250psi are available. |  | 37 UltraStable Pressure Sensor
The Model 37 is a high performance, temperature compensated, piezoresistive silicon pressure sensor packaged in a differential TO-8 configuration. It provides excellent performance and long-term stability. Differential pressure ranges from 0-15psi to 0-250psi are available. |  | 4415 Pressure Sensor
The 4415 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance at low pressure ranges is required. The pressure sensor is available in differential pressure ranges 0- 5” H20 and 0-10” H20. |  | 4416 Pressure Sensor
The 4416 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance at low pressure ranges is required. The pressure sensor is available in gauge pressure ranges in 0-5” H20 and 0-10 H20. |  | 4425 Pressure Sensor
The 4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. The pressure sensor is available in absolute or differential pressure ranges from 0-1 psi to 0-100 psi. |  | 4426 Pressure Sensor
The 4426 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. The pressure sensor is available in absolute or gauge pressure ranges from 0-1 psi to 0-100 psi. |  | 47 UltraStable Pressure Sensor
The Model 47 is a temperature compensated, piezoresistive silicon pressure sensor packaged in TO-8 configurations. It provides excellent performance and long-term stability. Gage and absolute pressure ranges from 0-2psi to 0-250psi are available. |  | MS5540C Pressure Sensor
The MS5540C is a SMD-hybrid device including a precision piezoresistive pressure sensor and an ADC Interface IC. It is a miniature version of the MS5534C barometer/altimeter module and provides a 16-bit data word from a pressure and temperature dependent voltage. MS5540C is a low power, low voltage device with automatic power down (ON/OFF) switching. | | Pressure Sensors & Transmitters - Pressure Transducers | |  | EPIH Subminiature Pressure Sensor
The EPIH is a subminiature pressure sensor, specifically designed for Dynamic and High Frequency measurements with resonant frequency up to 1.7 MHz. Available with many various housings, EPIH is one of the smallest pressure sensors in the world. |  | EPL Miniature Surface Mount Pressure Sensor
The EPL is a surface mount pressure sensor with a stainless steel diaphragm. Available in ranges from 5 to 5000 psi (0.35 to 350 bar), EPL is easy to install on flat surfaces using elastomer or epoxy. |  | EPX Miniature Pressure Sensor
The EPX is a miniature threaded pressure sensor with stainless steel flush diaphragm compatible with general media. Threads M5x0.8 or 10-32 UNF are available with built-in 0-ring seal for an easy installation. The EPX is offered in many pressure ranges from 0.35 to 350 bar (5 to 5000 psi) with gage, sealed gage, or absolute pressure reference. |  | EPXN Pressure Sensor
The EPXN is a high performance small pressure sensor using silicon chip for clean media (non corrosive). With it's recessed port, it is best recommended for static applications or low frequency. Offered in pressure ranges from 0 - 5 up to 0 - 150 PSI. |  | EPXO Pressure Sensor
The EPXO is a high performance unit with a stainless steel flush diaphragm. It is designed for high temperature, high stability, and high sensitivity applications. The EPXO is offered in pressure ranges from 0 - 150 up to 0 - 7500 PSI in gage (vented), sealed gage, and absolute pressure. |  | P900 Pressure Transducer
The P900 uses a 17-4 PH stainless steel diaphragm to sense pressure. The deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod, where the strain is measured by four foil strain gauges. Capable of sensing extremely small changes of applied pressure, it is relatively insensitive to vibration, attitude, and shock. Available in ranges from 0 - 75 up to 0 - 10,000 PSIG, with optional intrinsic safety. |  | P9000 Pressure Transducer
The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. The synergy of these technologies results in an instrument grade pressure transducer. Available in ranges from 0 - 75 up to 0 - 10,000 PSIG. |  | US10000 UltraStable Pressure Transducer
The US10000 Series from MEAS is the first choice for applications requiring high accuracy in a rugged environment. The 0.05% accuracy and typical total error band of 0.25% provides a stable platform for test stands and high accuracy industrial pressure applications. Available in ranges from 0 - 5 up to 0 - 10,000 PSI, in gage and absolute pressure. |
| Rotary Position Sensors - Hall Effect | |  | NRH280 Noncontact Rotary Hall Sensor
Rotary position sensor that features a 2-piece unit - fully sealed sensor assembly and magnetized bolt. Single or dual outputs available. |  | SRH220DR Contactless Rotary Sensor
SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur. It is housed in an all-new moulded housing with separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected. |  | SRH280P & SRH280DP Contactless Rotary Position Sensor
For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68. |  | SRH500P Contactless Rotary Sensor
The SRH500P can meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, steelworks, marine equipment and power generating plants. This model has an option for environmental protection to IP69K. |  | SRH880P Submersible Contactless Rotary Sensor
The SRH880P has been specially developed to meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks and power generating plants. |  | TPS280DP Throttle Position Sensor
TPS280DP is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centers and is designed to interface with most common throttle body D type spindles. The sensor has a choice of 200 or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the FDR-25 sheathed spec 55A cable. With sealing to IP69K, it is also able to withstand high pressure wash-downs. | | Rotary Position Sensors - Inductive | |  | RSYN Rotary Position Sensor
RSYN angular position sensors are non-contact transducers that incorporate proprietary rotor and coil designs.The linear AC output represents the rotor shaft angle position providing the user with exceptional resolution even over very small angular ranges. |
 | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |  | INF-USB Universal Serial Bus Output Module
The INF-USB module allows measurements from load cells, torque sensors, or other sensors to be acquired by USB. System also includes graphing and logging software. |  | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. | | Signal Conditioning - Distributed IO | |  | ioPro Distributed IO
The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved performance. | | Signal Conditioning - Wireless | |  | EtherWave™ WE
The EtherWave WER allows you to build your own long-range, non-line-of-sight, point-to-point, or point-to
multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, IP Cameras, VoIP phones, digital signage, or access control / security systems. The EtherWave WER
offers the ideal combination of price, range, data rate, security, interference avoidance, quality-of-service, and
ease-of-use. |  | EtherWave™ WEB-900
The EtherWave WEB replaces costly wiring with a wireless Ethernet bridge that can enable remote Wi-Fi APs, Ethernet
pan/tilt/zoom security cameras, VoIP phones, or Internet kiosks. ioSelect’s product offers the ideal combination
of price, range, data rate, security, interference avoidance, quality-of-service, and ease-of-use. |  | EtherWave™ WER-900
The EtherWave WER allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | EtherWave™ WMR-900
The EtherWave WMR allow you to build your own long-range, non-line-of-sight, point-to-point or point-to-multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, remote
instruments, bio-scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. |  | ioPro™ WDL
The Wireless Data Link (WDL) adds seamless wireless capabilities to the ioPro Series. The WDL supports all the
ioPro operating modes, and more. With its industry leading 125Kbps over air data rate it can be used as a "Radio
Modem" for other demanding wireless serial applications. With its powerful radio (Up to 1 Watt) and high receiver
sensitivity the WDL can communicate effectively over long distances (up to 20 Miles with clear line of site), and has
the power to penetrate walls and other obstacles in shorter runs. |  | ReFlexIO™ Industrial Wireless Cable Replacement System
If you need to control or monitor a device or system at a distance, the ReFlexIO is the solution. It comes complete with 8 x onboard I/O that allow you to connect to almost any device. Use it monitor or control pumps, valves, PLC’s, dataloggers, rain gauges, tank levels, security systems, fire & evac systems, access control, irrigation systems, flow meters, emergency standby systems and more. | | Wireless Accessories
A complete set of accessories for creating a reliable and high performance wireless system. |
| Software - Data Analysis Software | |  | GlyphXE Analysis Software
Integrated and powerful analysis methods for post-processing of your measured data make GlyphXE the technically mature, professional tool for your test projects. At the same time, GlyphXE convinces through maximum ease of use - even for occasional users. GlyphXE provides a graphical user interface that enables you to develop individual analyses and computations step by step. No programming knowledge or learning of a special script language is required. |  | InField Software
InField is a versatile field analysis software program optimized for use with SoMat hardware. It is designed to enhance the field test collection and data visualization process by making sure you never leave the field without the numbers you need. | | Software - Fatigue & Durability Software | |  | Automation Software
nCode Automation captures, manages, distributes, and performs in depth-analyses of time-dependent data within a common, collaborative environment. It is a web-based system - simple to deploy, configure and use. No software coding is required and nCode Automation is hardware independent. Complex analysis process can be developed using GlyphWorks on the desktop and uploaded to the nCode Automation server. Queries and reports can be readily based on all the analysis results. Detailed bespoke web reports are now possible on all engineering data, without having to move large data files around IT networks. |  | GlyphWorks
nCode GlyphWorks is the leading data processing system for engineering test data analysis. Designed to handle huge amounts of data, GlyphWorks provides a graphical, process-oriented environment. Users can simply create an analysis workflow by ‘drag and dropping’ analysis building blocks. | | Software - Measurement Software | |  | Catman AP Software
Benefit from the new generation of data acquisition software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP. |  | Catman Enterprise Software
The catman®Enterprise software suite was specifically developed for high channel-count measurement using the MGCplus DAQ system. A dedicated measurement-data server (MDS) performs the actual measurement. You can connect a number of client PCs to simultaneously access data on the MDS server. This enables you to monitor and evaluate your high channel-count measurement processes in real time. |  | Catman Professional Software
Catman®Professional enables you to easily configure connected amplifiers and intuitively define, run and automate your measurement sequences without any programming knowledge. Measured values can be visualized in real time or after measurement has been concluded for reporting purposes. Recurring measurement tasks are greatly simplified as catman® can be used to automate each sequence. |  | Perception Software
Perception is a modularly structured software package for high speed measurement data acquisition and it accomplishes all tasks in the measurement sequence: Parameterization of sensors and control of measurement instruments, Real-time display of measured values, Storage and playback, and Analysis and report generation. The special features in Perception enable rapid setup times, rapid familiarization and therefore the immediate start of the measurement campaign. |  | Perception Software - advanced exports
For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular programs. Extensive built-in set-up options let you export the data of interest the way you want, and nothing more. In addition, these exports can be combined with the powerful automation and post processing features included as standard in Perception. |  | Perception Software - analysis
Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The formula results can be re-used in other formulas to get even more advanced answers. |  | Perception Software - basic FFT
The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore the user can obtain valuable information about the content of mixed signals like vibrations, shocks or noisy signals beyond what is visible in a time domain display. |  | Perception Software - HPHV automated analysis
The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate
reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately and in an automated manner. |  | Test Control Environment (TCE) Software
SoMat Test Control Environment (TCE) is the Microsoft Windows-based® test control and setup interface software that is supplied with every eDAQ and eDAQ-lite data acquisition system. |
| Strain Gauges - Accessories | |  | LS Solder Terminals
Terminal strips for mounting the strain gauge leads and connecting cabling. |  | RMS1 Cleaning Solvent
Satisfactory bonding joints are only achieved if the adhesive covers the bonded surfaces well. Therefore, the application surfaces must be cleaned prior to bonding with a chemically pure solvent and a clean cleaning pad. RMS1 is an environmentally friendly mixture of Isopropanol and Acetone which dissolves all normal contamination. | | Strain Gauges - Strain Gauges | |  | C Series Strain Gauges
The specialist for extreme temperatures. |
 | HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP |  | TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle. |  | TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically. |
 | D-series Dual Axis Inclinometer
The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals. |  | LCF-196 Inclinometer
The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF-196 is a two-axis unit housed in a 22mm diameter cylindrical package. |  | LCF-2000 Inclinometer
The JEWELL LCF 2000 Series Inclinometer is a two axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | LCF-3000 Inclinometer
The JEWELL LCF 3000 Series Inclinometer is a three axis version of the rugged, high accuracy LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA output. |  | LSO Inclinometer
Our most rugged general-purpose inclinometer. Our JEWELL LSO inertial sensors meet the needs of a variety of commercial and industrial applications. They offer precise readings with high outputs at lower range frequencies. |  | LSR Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSR inclinometer offers the same precise readings with high outputs at lower range frequencies as our LSO Series. |  | NS-10G Inclinometer Switch
This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°. |  | NS-P Inclinometer
The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. They feature an aluminum baseplate and IP 65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°. |  | STT500 Sealed Tilt Sensor
The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems. |
|
|
|
|
|
|
|