Durham Instruments

Accelerometers

	4600 Accelerometer The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g.
	4602 Accelerometer The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g.
	52 Crash Test Accelerometer The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit has been designed for side impact crash applications. Available in ranges from ±50g to ±2000g.
	52M30 Crash Test Accelerometer The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit has been designed for side impact crash applications. Features an aluminum housing and jacketed cable. Available in ranges from ±50g to ±2000g.
	606M2 Accelerometer The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity.
	8102 Triaxial Piezoelectric Accelerometer The Model 8102 is a low cost, plug & play triaxial accelerometer. It incorporates full power and signal conditioning with a maximum current consumption of only 22 micro-amps. Available from ±25g to ±6000g ranges and provides a flat frequency response up to 6kHz.
	MiniSense 100 Accelerometer The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts.

Data Acquisition

Display & Panel Meters

	9320 Hand Held Digital Indicator The 9320 is a bipolar 7-digit hand held meter featuring two independently scalable ranges, peak and valley monitoring, display hold, mV/V calibration and a power save feature. Typical battery life exceeds 40 hours of continuous use. IEEE1451.4 TEDS Plug & Play compliant.
	9820 Digital Indicator Bipolar, 5-digit display featuring 2000Hz high-bandwidth, +/-10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal connector.
	9830 Digital Indicator Bipolar 5-digit display with 120 sample/second internal update rate, 2000Hz high bandwidth +/-10v and 4-20mA outputs, front panel shunt calibration and tare, RS232 and digital output setpoints and adjustable digital filter. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector.
	9834 Digital Indicator For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in AC power cord. Sensor connection via 9-pin connector.
	9860 Digital Indicator Similar to the 9830 indicator, but with TEDS functionality.
	MM40 Digital Indicator Features large 4 ½ digit LED display with full range from 19999 to 99999. The easy to use pushbutton zero adjustment and range configuration minimizes end-user setup time. Operating from 85 to 250VAC 50/60 Hz, with a rugged NEMA 4X/IP165, IP20 touch safe case perfect for laboratory and industrial environments.

Encoders

Humidity Sensors

	HM1500LF Humidity Sensor HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply.
	HM1520 Humidity Sensor HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply.
	HTM2500 Humidity and Temperature Sensor HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage output. Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc.
	HTU1X Series Humidity & Temperature Sensor Based on the rugged MEAS humidity sensor, the HTU1X(F) Series modules are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs.
	Humidity Sensors (overview) Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve control and output.

Joysticks

	JC Handles: Ergonomic Handles for JC Joysticks The Penny & Giles JC300, JC400, JC150, JC600, JC2000 and JC6000 range of single and multi-axis joystick controllers have a number of ergonomic handle designed to suit different functions.
	JC200 Multi-Axis Inductive Joystick The JC200 has been designed for use with a separate valve driver card or machine control unit. Safety features include a lever mechanism that returns to the centre position when released and internal fault monitoring circuits. Typical applications include the control of wheelchairs, fork lift trucks and agricultural machinery.
	JC2000 Multi-Axis Contactless Joystick The JC2000 is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions.

Lasers

	AR3000 Laser Distance Sensor AR3000 distance measurement sensors are Acuity's longest-range models. Ideal for measuring positions of cranes and trolleys, the pulse time-of-lfight sensor can reach 300 meters to normal surfaces and up to 3000 meters when using a reflective target. With sampling speeds to 2 KHz, the AR3000 sensors can monitor the speed of moving targets.
	AR500 Laser Position Sensor The AccuRange 500 Laser Position Sensors are fast and accurate measurement devices for integrated industrial measurement systems. Available up to ranges of 1000 mm, all models use a compact enclosure. These sensors are available with optional BLUE laser diodes.
	CCS Prima Confocal Sensor Acuity's most accurate and most resolute distance sensor employs a unique measuring principle, confocal chromatic sensing. Unlike our time-of-flight and triangulation sensors which use lasers, the CCS Prima Confocal sensors use a white light source to accurately measure the distance to surfaces. Some models are accurate to within 20 nanometers. Additionally, this technology permits measurement and profile of transparent materials like glass, lenses, liquids, etc.

Linear Position Sensor

Load Cells / Force Transducers

Mass Flow Sensors

Piezo Film

Pressure Sensors & Transmitters

Rotary Position Sensors

Signal Conditioning

	140 Inline Amplifier The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function.
	500 In-Line Signal Conditioner Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth.
	BSC4 4-Channel Bridge Amplifier Four channel bridge amplifier with voltage and current or USB output.
	CSC Inline Signal Conditioner Designed to be built into the load cell cable. Available with a range of voltage or current outputs.
	DMA Signal Conditioner Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration.
	INF-USB Universal Serial Bus Output Module The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. Included graphing and logging software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for later research.
	SGA Signal Conditioner User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings.

Software

Strain Gauges

TEDS - Plug & Measure

	HBM TEDS-Ready Amplifiers Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP
	TEDS Dongle The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle.
	TEDS Modules The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically.

Temperature

Tilt Sensors & Inclinometers

	AccuStar IP-66 Clinometer The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. Available in various ranges up to ±45°
	D-series Dual Axis Inclinometer The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals.
	DOG1 MEMS-Series USB Inclinometer The Single Axis Inclinometer is well suited for test and measurement purposes as well as for vehicle and off road applications. Easy to use software for Microsoft Windows is included. On the other hand, the sensor can be accessed using a virtual COM port for easy integration.
	DOG2 MEMS-Series USB Dual Axis Inclinometer The dual axis MEMS inclinometer has a measurement range of +/-90° inclination in both x-and y-axis. The rugged transducer design capable of functioning during and after severe shock loads and vibrations. This unit with USB interface is absolute plug & play functional and ideal for quick test and measurement jobs.
	P-Series Inclinometer The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage +/-1.5V or current output 4…20 mA signal. They feature an aluminum baseplate and IP65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°.
	V-Series Inclinometer The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.

Weighing