|
|
|
 |
|
|
| MEASUREMENT SPECIALTIES / ENTRAN |
Entran is a designer and manufacturer of acceleration, pressure, and force sensors which are primarily sold to the automotive crash test and motorsport racing markets. Their primary products include piezo-resistive accelerometers sold to various customers for use in destructive automotive crash testing, both on crash dummies and on the car.
|
|
|
 Products |
| |
 | 53 Triaxial Crash Test Accelerometer
The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Available in ranges from ±50g to ±2000g. |  | EGAS Accelerometer
The Model EGAS is a miniature, uniaxial accelerometer featuring ranges from ± 5 g’s through 2500 g's. |  | EGAS3 Triaxial Accelerometer
The Model EGAS3 is a cube-shaped, triaxial accelerometer with frequency response to 3500 Hz. These units are well-suited for Robotics, Machine Control, Maintenance, Inspection and Vibration applications. Available in ranges from ±5g to ±2500g. |  | EGAXT Accelerometer
The Model EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGAXT3 Triaxial Accelerometer
The Model EGAXT3 miniature triaxial accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±2500g. |  | EGCS-A2 & EGCS-B2 Accelerometers
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overrange stops that are set to protect the unit against 10,000g shocks. Available in ranges from ±5g to ±5000g. |  | EGCS-D0 Accelerometer
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overange stops that are set to protect the unit against 10,000 g shocks. It is a screw mount, stainless steel device. Available in ranges from ±5g to ±5000g. |  | EGCS-D1S Accelerometer
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overange stops that are set to protect the unit against 10,000 g shocks. It is a screw mount, stainless steel device. Available in ranges from ±5g to ±5000g. |  | EGCS-L High Amplitude Shock Accelerometer
The Model EGHS-L is a high amplitude piezoresistive shock accelerometer designed for transient shock testing. Available in ±30,000g and ±60,000g ranges, it is packaged in a rugged welded stainless steel housing. |  | EGCS-S425 Accelerometer
The Model EGCS-S425 is a small, ISO 6487 and SAE J211 compliant piezoresistive accelerometer. Available in ranges from ±50g to ±2000g. |  | EGCS3-D Triaxial Accelerometer
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5g through ±5000g. This rugged device is ideal for offshore, downhole and shock testing applications. | | Accelerometers - Board Level / OEM |  |  | EGHS-M High Amplitude Shock Accelerometer
The Model EGHS-M is a high amplitude piezoresistive shock accelerometer designed for embedded applications. The accelerometer is available in ±30,000g and ±60,000g ranges. |
| Load Cells / Force Transducers - Load / Force Washers | |  | ELWF Load Washer
The ELWF is a compression load washer typically used in bolt loads, assembly forces, biomechanical force measurement, tool forces, thrust measurements, and robotics end effectors. Available in capacities from 5 lbf. to 2K lbf. | | Load Cells / Force Transducers - Load Buttons | |  | ELAF Compression Load Cell
The ELAF is a compression-only load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, material test, and hoist and winch loads. Available in capacities from 10 lbf. to 5K lbf. |  | ELFF Load Cell
The ELFF is a compression or tension & compression load cell typically used in surface mount assembly system force feedback, robotics end effectors, weighing, dental and biomechanical parameter measurements, satellite and aerospace force feedback, and ultra low deflection applications. Available in capacities from 10 lbf. to 100 lbf. |  | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. |  | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. | | Load Cells / Force Transducers - Miniature | | | ELAF Compression Load Cell
The ELAF is a compression-only load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, material test, and hoist and winch loads. Available in capacities from 10 lbf. to 5K lbf. | | ELFF Load Cell
The ELFF is a compression or tension & compression load cell typically used in surface mount assembly system force feedback, robotics end effectors, weighing, dental and biomechanical parameter measurements, satellite and aerospace force feedback, and ultra low deflection applications. Available in capacities from 10 lbf. to 100 lbf. | | ELHM Load Cell
The ELHM is a compression or tension & compression load cell, typically used in theatrical rigging loads, assembly forces, weighing, tool forces, thrust measurements, demanding longer term measurements, product validation testing, material test, and hoist and winch loads. Available in capacities from 500 lbf. to 10K lbf. | | ELHS Load Cell
The ELHS is a compression or tension & compression load cell typically used for assembly forces, applications requiring ultra fast response, tool forces, thrust measurements, measurements requiring low sensor deflection and high resolution, and product validation testing. Available in capacities from 20 lbf. to 10K lbf. |  | ELPF Load Cell
The ELPF is a compression or tension & compression load cell typically used for theatrical rigging loads, assembly forces, tool forces, thrust measurements, batch weighing, robotics end effectors, product validation testing, medical instruments, and hoist and winch loads. Available in capacities from 10 lbf. to 500 lbf. | | Load Cells / Force Transducers - Specialty | |  | EL20-S458 Belt Tension Load Cell
The EL20-S458 is a seat belt tension load cell, typically used for automotive crash test, military payload delivery, sport and military parachute tether loads, and automatic reserve chute deployment systems. Available in capacities of 1K lbf. to 3.2K lbf. |
| Pressure Sensors & Transmitters - Pressure Transducers | |  | EPB Pressure Sensor Probe
EPB is a small pressure probe sensor, small profile, stainless steel, flush mount transducer designed for general media. EPB is offered in pressure ranges from 0-5 to 5000 psi (0-0.35 to 350 bar), vented, sealed, and absolute pressure. |  | EPIH Subminiature Pressure Sensor
The EPIH is a subminiature pressure sensor, specifically designed for Dynamic and High Frequency measurements with resonant frequency up to 1.7 MHz. Available with many various housings, EPIH is one of the smallest pressure sensors in the world. |  | EPL Miniature Surface Mount Pressure Sensor
The EPL is a surface mount pressure sensor with a stainless steel diaphragm. Available in ranges from 5 to 5000 psi (0.35 to 350 bar), EPL is easy to install on flat surfaces using elastomer or epoxy. |  | EPRB-1 Ultra Miniature Pressure Transducer
Ultra Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 50 up to 0 - 5,000 PSI. |  | EPRB-2 Miniature Pressure Transducer
Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 5 up to 0 - 5,000 PSI. |  | EPRB-3 Ultra Miniature Pressure Transducer
Ultra Miniature Pressure Transducer with platinum RTD to sense media temperature, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. Available in ranges from 0 - 50 up to 0 - 5,000 PSI. |  | EPX Miniature Pressure Sensor
The EPX is a miniature threaded pressure sensor with stainless steel flush diaphragm compatible with general media. Threads M5x0.8 or 10-32 UNF are available with built-in 0-ring seal for an easy installation. The EPX is offered in many pressure ranges from 0.35 to 350 bar (5 to 5000 psi) with gage, sealed gage, or absolute pressure reference. |  | EPXN Pressure Sensor
The EPXN is a high performance small pressure sensor using silicon chip for clean media (non corrosive). With it's recessed port, it is best recommended for static applications or low frequency. Offered in pressure ranges from 0 - 5 up to 0 - 150 PSI. |  | EPXO Pressure Sensor
The EPXO is a high performance unit with a stainless steel flush diaphragm. It is designed for high temperature, high stability, and high sensitivity applications. The EPXO is offered in pressure ranges from 0 - 150 up to 0 - 7500 PSI in gage (vented), sealed gage, and absolute pressure. |
|
|
|
|
|
|
|