|
|
|
 |
|
|
|
Since 1950, HBM has built a globally-respected reputation in the Test and Measurement industry, based on the supply of reliable precision transducers and measurement solutions across a broad range of industries. As a technology and market leader worldwide, the company today offers products and services across the entire measurement spectrum, from virtual to physical testing. Products comprise sensors (load cells, torque cells, pressure transducers, displacement sensors, and strain gauges), instrumentation and data acquisition systems as well as durability, test and analysis software. In addition, HBM has dedicated resources worldwide for the design, development and production of customized sensors.
|
|
|
 Products |
| |
 | BN100A Bridge Calibration Unit
The BN100A bridge calibration unit is a highly precise calibrator to calibrate measuring equipment and measurement chains which function with a carrier frequency of 225Hz. The BN100A bridge calibration unit is inserted in the measuring system to be calibrated in place of the transducer (full bridge), or is connected directly with the measuring instrument, and simulates with the aid of switchable inductive dividers the output signals of the transducer in a range of ±100mV/V. |  | DMP40 Digital Precision Measuring Amplifier
The DMP40 is especially suitable for high precision comparative measurements of mechanical quantities such as force, mass, torque and pressure. One example of this is the measurements performed by the National Metrological Organizations like the PTB (German Metrology Institute). In this field of application the preceding model (DMP39) has already been employed as a reference instrument throughout the world. |  | K148 Calibration Unit for full bridge amplifiers
The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with measuring ranges from ±0.2 mV/V up to ±100 mV/V to be calibrated. |  | K3607 Calibration Unit
The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement chain. For this purpose the calibration instrument is equipped with a high-precision resistance network in star configuration, designed to simulate 350-ohm strain gauge full-bridge transducers. |  | K800 Calibration Unit for 8-channel quarter-bridge amplifiers
The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated regularly to ensure accuracy. |
| Data Acquisition - Genesis HighSpeed - Power and Isolation products |  |  | BE3200 Test Sequencer
The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. It replaces traditional electromechanical systems with microprocessor precision. Up to 32 optically-isolated outputs are available, with extensive interlocking and safety features. Windows software provides control in milliseconds, cycles or degrees of phase via an optically-isolated serial port. |  | BE560 Isolation Amplifier
The Isolation Amplifier BE560 is a complete stand-alone isolated amplifier of modular construction for professional low and medium voltage measurement applications. The instrument is an ideal solution to protect your measurement system and yourself against hazardous voltages. |  | ISOBE5600 Isolated Probe System
The ISOBE5600 is a fiber optic isolated probe system designed for remote measurements in high or low voltage environments, for current shunt measurements or just to provide safe isolation. With a DC to 20MHz bandwidth and carefully shielded transmitter, the Isobe5600 is versatile enough to be used for many applications in motor controls, power distribution, power supply testing, high voltage/high current, ballistics, ordnance and physiology. |  | MV-HV 6600 Isolated Digitizer
The 6600 Isolated Digitizer from HBM is a remote, fiber optic front end for the Genesis HighSpeed (GEN5i, GEN7t/14t) transient recorder. Each channel is completely remote programmable. The 6600 Isolated Digitizer is designed to be used in the harshest environments including the strongest electric and magnetic fields. The fiber optic link eliminates ground loops and guarantees a safe isolation between the device under test and the control room in short circuit, high voltage, and high power labs. | | Data Acquisition - High Speed - Dimension | |  | Dimension4i High Speed DAQ & Transient Recorder
Can be used both as a data recorder and a transient recorder. Combines all essential instruments in one device. Easy to understand and operate. |  | Accelerometer Digitizer
The Accelerometer Digitizer is a very versatile and high performing amplifier, ideal for powering ICP transducers, or accommodating AC and DC signals. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, analog anti-aliasing filters. |  | Data Recorder Dimension4i (specifications)
Dimension4i can be used both as a data recorder and as a transient recorder – meeting the highest of demands. Dimension4i therefore combines all essential instruments in one device. Because Dimension4i was developed in cooperation with users as a professional tool for daily use, operation of the Dimension4i is intuitive and oriented towards the requirements of use: easy to understand, easy to operate. Routine tasks are quickly completed with Dimension4i so that you can concentrate fully on your tasks as a professional. |  | Isolated Digitizer
The Dimension Isolated Digitizer was designed for the extreme testing conditions and accuracy requirements of high voltage measurement applications. This module is outfitted with state of the art components including 24-bit analog to digital converters (one per channel), dual 32 bit floating point digital signal processors, isolation circuitry and analog anti-aliasing filters. | | Data Acquisition - High Speed - Genesis | |  | GEN7t & GEN16t High Speed - High Channel Count DAQ
With GEN7t/16t, you can configure up to 1,080 synchronized channels according to your requirements. Your system grows from the first channel onwards exactly as your project changes. Stay on top, rapidly, reliably, flexibly and always with perfect precision. Up to 8 GEN "slaves" can be connected to a GEN7t/16t master, each of these 9 devices can contain between 4 and 120 channels, and all 1,080 channels can measure in synchronization with each other. |  | GEN7t & GEN16t - mainframes & option
The GEN series Data Acquisition System is one of the most sophisticated and powerful systems in the marketplace and demonstrates the quality HBM has to offer. |  | Basic 1M Digitizer
8 Channel, 1MS/s, Basic Card, 256MB RAM (16 MS/ch) |  | Basic 1M ISO Digitizer
8 Channel, 1MS/s, Basic Card, 512MB RAM (32 MS/ch) - isolated, unbalanced-diff |  | Basic 1M XT ISO Digitizer
8 Channel, 1MS/s, Basic XT Card, 512MB RAM (32 MS/ch) - isolated, with extended input range |  | Basic 200K Digitizer
8 Channel, 200kS/s, Basic Card, 128MB RAM (8 MS/ch) | | BE3200 Test Sequencer
The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. It replaces traditional electromechanical systems with microprocessor precision. Up to 32 optically-isolated outputs are available, with extensive interlocking and safety features. Windows software provides control in milliseconds, cycles or degrees of phase via an optically-isolated serial port. |  | Binary Marker CT
The Binary Marker CT board CT is a dedicated binary input option for GEN DAQ products. It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of counter/timer functionality. Each channel can have its own function. |  | Binary Marker HV ISO
The Binary Marker HV board is a dedicated input option for GEN DAQ products. It enables to record up to 32 binary input channels (marker channels) as well as 8 digital event signals that are optically isolated with up to 1 MS/s per channel. |  | Bridge 1M ISO Digitizer
4 Channel, 1MS/s Bridge Card, 512MB RAM (64 MS/ch) - isolated |  | Bridge 200K ISO Digitizer
4 Channel, 200kS/s Bridge Card, 128MB RAM (16 MS/ch) - isolated |  | Fast Differential Digitizers
For ultra fast signals, the 25 MS/s and 100 MS/s high speed digitizer boards are equipped with four channels sampling at incredible high speed. With selectable anti-aliasing filtering and 14-bit (100 MS/s) or 15-bit resolution (25 MS/s), these inputs turn the GEN series into an extremely fast transient recorder. |  | GEN2i High Speed - Portable Data Recorder
GEN2i is a revolutionary new portable data recorder, offering incomparably powerful features and an exciting touchscreen user interface. With up to 16 input channels, fully configurable to your needs, it provides both continuous direct-to-disk as well as fast transient recording. |  | Genesis GEN5i Portable High Speed DAQ
The complete, portable test laboratory. Up to 40 channels available simultaneously. With integrated PC, you can measure directly at the event location & analyze the results. |  | Isolated Digitizer 7600 Subsystem
The Isolated Digitizer 7600 Subsystem is used in the most demanding test applications requiring high voltage isolation and safe and accurate measurements in harsh electrical and physical environments. It offers enhanced temperature range and increased mechanical robustness. It is a DC powered subsystem to be integrated on site into the final system solution. | | MV-HV 6600 Isolated Digitizer
The 6600 Isolated Digitizer from HBM is a remote, fiber optic front end for the Genesis HighSpeed (GEN5i, GEN7t/14t) transient recorder. Each channel is completely remote programmable. The 6600 Isolated Digitizer is designed to be used in the harshest environments including the strongest electric and magnetic fields. The fiber optic link eliminates ground loops and guarantees a safe isolation between the device under test and the control room in short circuit, high voltage, and high power labs. |  | Universal 1M ISO Digitizer
4 Channel, 1MS/s Universal Card, 512MB RAM (64 MS/ch) - isolated |  | Universal 200K ISO Digitizer
4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) - isolated | | Data Acquisition - Laboratory Universal Data Acquisition | |  | MGCplus Data Acquisition System (overview)
With more than 100,000 channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. Supports a wide spectrum of transducers, fieldbus connections and standard PC interfaces. It is the choice for almost all industrial, laboratory and R&D measurement applications. Capable to measure force, displacement, pressure, temperature, torque, acceleration, strain, stress, voltage, current, frequency or resistance - at low or high speeds. |  | APxx Connection Boards for MGCplus
Connection boards for single channel or multi-channel amplifiers. Also connection boards for special-function modules. |  | Cpxx Communication Processors for MGCplus
Outstanding performance and use of standard PC interfaces distinguish the communication processors CP22 and CP42 for MGCplus. Both allow the assembly of networks: An important condition if data acquisition systems with more than 1,000 active channels should assembled. |  | ML38 High-precision Single-channel Amplifier Module for MGCplus
The ML38B precision amplifier provides a high resolution of 1,000,000, an accuracy of 0.0025% and an excellent long-term stability. |  | MLxx Amplifier & Communication Modules for MGCplus
Single-channel and multi-channel amplifer modules, and special-function modules for the MGCplus system. |  | CANHEAD Distributed Amplifier System
Simplify your measurement processes with CANHEAD® - and at the same time gain flexibility and efficiency. CANHEAD® is ideal for average to high channel counts. The 10-channel CANHEAD® amplifier modules can be installed in immediate proximity to the measuring points. Inexpensive and reliable standard fieldbus cables connect the CANHEAD® modules to a communication master. |  | CANHEADdirect Communication Module
The CANHEADdirect communication module enables measurement data of up to five CANHEAD® modules to be directly transmitted to a PC via CANbus. At a price that makes the CANHEAD® system the first choice for small and medium-sized applications in experimental structural and stress analysis as well. | | Data Acquisition - Precision Amplifiers/Calibration Instruments | | | DMP40 Digital Precision Measuring Amplifier
The DMP40 is especially suitable for high precision comparative measurements of mechanical quantities such as force, mass, torque and pressure. One example of this is the measurements performed by the National Metrological Organizations like the PTB (German Metrology Institute). In this field of application the preceding model (DMP39) has already been employed as a reference instrument throughout the world. | | Data Acquisition - Rugged/Mobile - Liberty | |  | Liberty Rugged Portable High Speed DAQ
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Liberty Rugged Portable High Speed DAQ (data sheet)
Product tests in vehicle construction and aerospace, or the commissioning and servicing of industrial infrastructures, do not take place under air-conditioned laboratory conditions. Instead, conditions usually include vibrations and shocks, spray water, dirt and extreme external temperatures. You can now gain the freedom to carry out measurements anywhere, even under these rough conditions with the Liberty system. |  | Accelerometer Digitizer
Each module contains a 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. Integrated programmable excitation of 1 mA to 15 mA @ 28 V nominal. |  | Bridge Plus Digitizer
Each module contains a 16-bit digitizer on each channel with 2mV-10V full scale ranges, 6-pole Butterworth 20kHz Anti-alias filter, and a selectable Bessel or Butterworth FIR digital filter. Integrated excitation is 0 to 10V bipolar, 30mA. Includes bipolar shunt and monitor output. |  | CANbus Digital Input Card
Each module has one or two CAN nodes plus 32 digital inputs including counter/timer, frequency, RPM and quadrature encoder channels. |  | DC-32 and TC Digitizer
The DC-32 module contains a 10kS/s, 16-bit digitizer on each of 32 channels with 1V to 5V ranges F.S. |  | General Purpose Digitizer
Each module contains a 100kS/s, 16-bit digitizer on each channel with 100mV-40V full scale ranges, 8-pole Butterworth 20kHz Anti-alias filter, and selectable Bessel or Butterworth FIR digital filter. | | Data Acquisition - Rugged/Mobile Thermocouple Module - cDAQ | |  | cDAQ Rugged Mobile Thermocouple Module
Engineered to operate within severe temperatures ranges of -40 to 125 °C with an IP 67 degree of protection, rating; the compact cDAQ modules allow users to take measurements directly in the most difficult test objects. It is available in 16-channel configurations for K-, J- or T-type thermocouples. | | Data Acquisition - Universal Data Acquisition | |  | QuantumX (overview)
QuantumX is a universal data acquisition system. "Universal" means that QuantumX can be used with all types of transducers. Its universal flexibility also means that you can use it to conduct all kinds of test and measurement tasks as well as for verification of results in any type of industrial environment. |  | QuantumX CX27 Ethernet-EtherCAT Gateway
CX27 allows integration of several QuantumX modules for real-time data acquisition of up to 199 signals via EtherCAT. Selected signals can simultaneously be monitored via Ethernet TCP/IP. |  | QuantumX MX1609 16-channel Thermocouple Amplifier
MX1609 is part of the QuantumX family and offers many excellent qualities: Reliable temperature measurement using the proven and widely used type K thermocouple – at the same time opening up fascinating new opportunities for your day-to-day measurement tasks. |  | QuantumX MX410 4-channel High-Dynamic Universal Amplifier
The MX410 provides both sampling rates of up to 96 kHz/channel and a high resolution of 24 bits. Results are highly accurate as required when capturing highly dynamic forces and accelerations. Compatible with strain gage transducers in half and full bridge configuration (DC, 4.89 kHz CF) as well as with inductive half and full bridges and current-fed piezoelectric sensors (IEPE). |  | QuantumX MX440A 4-channel Universal Amplifier
4 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX460 4-channel Frequency Measuring Amplifier
Capture digital rotational speed signals or evaluate pulse width modulation signals (PWM). Or integrate the worldwide leading HBM torque transducers into the QuantumX universal data acquisition system. Features sampling rates of up to 96 kHz/channel and a bandwidth of up to 38 kHz. An ideal choice for applications in motor and drivetrain development. |  | QuantumX MX840A 8-channel Universal Amplifier
8 individually adjustable inputs, 24-bit A/D converter per channel, sampling rate of up to 19.2 kHz/channel (adjustable). Small; fits into any test bench. |  | QuantumX MX878 Transmitter with 8 analog voltage outputs
The MX878 transmitter enables scaled measurement signals to be monitored in a standardized unit of measurement or transmitted to other systems to allow flexible and efficient data analysis. In addition, signals can be set off against each other using algebraic operations. The module also features functions for peak value analysis. |  | Spider8 Multi-Channel Electronic PC Measurement Unit
Spider8 is a multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer. The Spider8 offers a congenial and economic alternative to systems consisting of a number of components. These are usually accommodated partly in the computer and partly externally and must first be wired and configured to form a measurement system. |
| Linear Position Sensors - Inductive | |  | W1ELA Inductive Displacement Transducer
The type W1ELA/0-2 inductive displacement sensors are normally installed, for example in machines, test equipment and measuring instruments. The sensors are available with an accuracy class of 0.2 for 4.8 kHz carrier frequency. |  | WA Inductive Displacement Transducer
The WA is a rugged series of inductive displacement transducers that combine very good linearity with excellent thermal behaviour in the shortest possible overall length. Available in plunger or probe versions. |  | WI Miniature Probe
Th WI series miniature probes are available in nominal (rated) measuring lengths of 2 mm, 5 mm and 10 mm with 8 mm clamping. They comply with protection class IP67. |
| Load Cells / Force Transducers - Load / Force Washers | |  | KMR Compression Force Washer
The KMR force washer is suitable for static or dynamic compressive forces. The sensor is manufactured from stainless steel and sealed to IP67 rating. Ranges are available from 20kN to 400kN. | | Load Cells / Force Transducers - Load Buttons | |  | C2 Compression Force Transducer
The C2 force transducer is designed for compressive loading applications with a key feature being its low height. Ranges are available from 0.5kN to 200kN. |  | C9B Compression Force Transducer
The C9B force transducer is suitable for measuring static or dynamic compressive forces. The sensor is designed for applications where space is at a premium. Ranges are available from 50N to 50kN. | | Load Cells / Force Transducers - Miniature | | | KMR Compression Force Washer
The KMR force washer is suitable for static or dynamic compressive forces. The sensor is manufactured from stainless steel and sealed to IP67 rating. Ranges are available from 20kN to 400kN. |  | U2B Force Transducer
The U2B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive loads. Loading is applied utilizing the integral mounting studs. Ranges are available from 0.5kN to 200kN. |  | U9B Force Transducer
The U9B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive forces. It is designed for assembly and production applications where space is at a premium. Ranges are available from 50N to 50kN. | | Load Cells / Force Transducers - Piezoelectric | |  | PACEline Piezoelectric Force Transducers (overview)
Your fitting and assembly processes are fast and space is a constraint. But you still expect consistently reliable quality control for your production. It’s time for PACEline. Compact and highly dynamic force measurement technology from HBM that makes the difference – and brings fresh impulses to piezo technology. |  | PACEline CFT Piezoelectric Force Transducer
CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic press-fit and assembly processes with fast force variations. |  | PACEline CFW Piezoelectric Force Washer
Thanks to their compact design CFW force washers can be used in many different applications, including adverse industrial environments. Presently available with nominal (rated) forces of 50 kN and 140 kN. Since the output signal is not dependent on the measuring range but on the force applied, CFW force sensors withstand very high overloads. |  | PACEline CMA Charge Amplifier
The PACEline CMA charge amplifier (analog amplifier) ensures reliable transmission of data from piezoelectric force transducers. This is done by signal conditioning to +/-10 V analog standard signals. |  | PACEline CMC - The piezoelectric force measurement chain
CFT piezoelectric force transducers and CMA analog amplifiers are combined to form a calibrated unit. Even with the most challenging task in your process monitoring: The CMC measurement chain keeps pace at any time. |  | PACEline CMD Digital Charge Amplifier
The digital charge amplifier for piezoelectric sensors assures multiple uses in many applications in the laboratory and production. The CMD600 measures very fast force, torque and pressure signals at frequencies of up to 30 kHz and can be used with piezoelectric sensors up to max. 600,000 pC (Pico coulombs). | | Load Cells / Force Transducers - Strain Transducers | |  | SLB-700A Strain Transducer
The SLB-700A/06 strain transducer is designed to attach directly to the plane surface and enables the strain of the test object to be measured directly. Range of strain measured is 500 um/m. |
 | MP85A FASTpress Industrial Amplifier
Maximize the quality of fitting processes such as riveting, punching or press-fitting. MP85A FASTpress monitors your production processes in real time, directly during ongoing operation. Your benefit: A consistently high quality of your products – because MP85A FASTpress identifies problems immediately as they occur. |
 | DF30CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. |  | DF30DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. |  | DF31CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | DF31DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |  | digiCLIP Digital Amplifier (overview)
digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available. |  | MP01 Multi Channel PME Amplifier
Multi-channel amplifier for applications in process supervision and industrial test-rig measurement technology. |  | MP55 Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers. |  | MP55DP Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers with DP interface. |  | MP60 Single Channel PME Amplifier
Single channel module for incremental transducers. |  | MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface. | | MP85A FASTpress Industrial Amplifier
Maximize the quality of fitting processes such as riveting, punching or press-fitting. MP85A FASTpress monitors your production processes in real time, directly during ongoing operation. Your benefit: A consistently high quality of your products – because MP85A FASTpress identifies problems immediately as they occur. |  | PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories. |
| Software - Measurement Software | |  | Catman AP Software
Benefit from the new generation of data acquisition software. catman®AP bundles highly efficient modules for many different measurement tasks. Each module is a champion in its specific field of application. The modules in combination provide a flexible, powerful, and networked high-performance package – catman®AP. |  | Catman Easy Software
With catman®Easy you can perform a large number of different measurement tasks quickly and simply... without wasting time or effort on programming. Thanks to the optimal interaction between hardware and software, you can configure your amplifier much faster. You can also quickly define your measurement parameters such as sampling rates, trigger settings, as well as select your preferred visualization mode. |  | Catman Enterprise Software
The catman®Enterprise software suite was specifically developed for high channel-count measurement using the MGCplus DAQ system. A dedicated measurement-data server (MDS) performs the actual measurement. You can connect a number of client PCs to simultaneously access data on the MDS server. This enables you to monitor and evaluate your high channel-count measurement processes in real time. |  | Catman Professional Software
Catman®Professional enables you to easily configure connected amplifiers and intuitively define, run and automate your measurement sequences without any programming knowledge. Measured values can be visualized in real time or after measurement has been concluded for reporting purposes. Recurring measurement tasks are greatly simplified as catman® can be used to automate each sequence. |  | Perception Software
Perception is a modularly structured software package for high speed measurement data acquisition and it accomplishes all tasks in the measurement sequence: Parameterization of sensors and control of measurement instruments, Real-time display of measured values, Storage and playback, and Analysis and report generation. The special features in Perception enable rapid setup times, rapid familiarization and therefore the immediate start of the measurement campaign. |  | Perception Software - advanced exports
For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular programs. Extensive built-in set-up options let you export the data of interest the way you want, and nothing more. In addition, these exports can be combined with the powerful automation and post processing features included as standard in Perception. |  | Perception Software - analysis
Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The formula results can be re-used in other formulas to get even more advanced answers. |  | Perception Software - basic FFT
The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore the user can obtain valuable information about the content of mixed signals like vibrations, shocks or noisy signals beyond what is visible in a time domain display. |  | Perception Software - HPHV automated analysis
The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate
reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately and in an automated manner. |
| Strain Gauges - Accessories | |  | DAK1 Strain Gauge Starter Kit
The starter kit DAK1 provides the first time user with a low cost and interesting option to start with the application of strain gauges. The well-designed and robust plastic case contains all aids required for initial applications. |  | DAK2 Strain Gauge Installation Case
The strain gauge installation case DAK 2 contains all tools and aids required for strain gauge installations. It is portable and lockable. Dimensions: 470 x 170 x 360 mm Weight: approx. 6 kg (incl. standard scope of delivery). |  | LS Solder Terminals
Terminal strips for mounting the strain gauge leads and connecting cabling. |  | RMS1 Cleaning Solvent
Satisfactory bonding joints are only achieved if the adhesive covers the bonded surfaces well. Therefore, the application surfaces must be cleaned prior to bonding with a chemically pure solvent and a clean cleaning pad. RMS1 is an environmentally friendly mixture of Isopropanol and Acetone which dissolves all normal contamination. | | Strain Gauges - Adhesives | |  | BCY01 Accelerator for Z70
BCY01 is an activator for the Z70 cyanacrylate adhesive. The curing of Z70 depends on the chemical state of the parts to be joined. There are conditions where curing may take place slowly or even remain incomplete; such as dry air (relative humidity below 40%), acid surfaces or too low temperature. In these cases the curing time can be shortened with the BCY01 activator. |  | EP150 Hot-Curing Single Component Adhesive
Epoxy resin adhesive that can be used with all types of strain gauges. Storage time(dry): 12 months in refrigerator (+7°C). Application temperature range: -70°C ... +150°C with zero-point related measurements (static) and with non zero-point related measurements (dynamic). |  | EP250 Hot-Curing Two Component Adhesive
EP250 is a two-component epoxy resin adhesive. EP250 is of pasty consistency and so it is suitable for porous surfaces as well as for smooth ones. For curing it requires heat and pressure. |  | EP310S Hot-Curing Two Component Adhesive
EP310 is a two-component epoxy resin adhesive. For curing it requires heat and pressure. EP310 is of watery liquid consistency and so it is suitable only for non-porous surfaces. |  | X280 Cold-Curing Two Component Adhesive
X280 is a two-component epoxy resin adhesive. As a cold curing adhesive it is easy to use and can be processed at minimum cost and effort. It hardens under normal ambient conditions. X280 is suitable for smooth and absorbent surfaces. |  | X60 Cold-Curing Two Component Adhesive
X60 is a 2-component fast curing adhesive, consisting of a liquid component (B) and a powder (component A). Typical application fields are: low temperature, porous materials as well as for securing the cables. |  | Z70 Cold-Curing Single Component Adhesive
Z70 is a single component, cold curing adhesive made of cyanacrylate. Curing is only possible on very slight adhesive films and at room temperature under thumb pressure. The air humidity needs to be between 40% and 70% as a catalyst for the curing process. | | Strain Gauges - Optical Strain Gauges | |  | Optical Strain Gauges
Benefit from the many new advantages of measuring with light - without having to abandon the ruggedness and convenience of the classical strain gauge. HBM's optical strain gauges are made from fibers of glass with a very small core diameter of no more than 5 micrometers. In comparison, the diameter of human hair ranges from 60 to 80 micrometers. The fiber core is surrounded by a cladding layer from purest glass with a diameter of 125 micrometers. |  | DI Series Optical Interrogators
Now you can also benefit from perfectly matched measurement chains when using optical strain gauges. Gain time and increase safety by utilizing the complete solution from a single source - from optical strain gauges through interrogators (opto-electric measurement instruments) and software. DI Interrogators are for dynamic measurements. |  | SI Series Optical Interrogators
Now you can also benefit from perfectly matched measurement chains when using optical strain gauges. Gain time and increase safety by utilizing the complete solution from a single source - from optical strain gauges through interrogators (opto-electric measurement instruments) and software. SI Interrogators are for static measurements. |  | EasyOptics module for CatmanAP software
HBM’s EasyOptics module for the catman®AP enables you to simultaneously acquire and visualize signals from optical and electrical strain gauges giving critical help when comparing different strain gauge measurements. |  | M408 - M416 Multiplexer for optical strain gauges
A single HBM multiplexer increases the number of optical sensor chains - and measuring points - that can be connected by up to a factor of 4. Instead of "cascading" several interrogators in series, multiplexers allow for extremely simple installation of your test setup - and at the same time provide a distinct cost advantage. | | Strain Gauges - Protective Coatings | |  | ABM75 Aluminum Foil c/w Kneading Compound
ABM75 is an aluminum foil c/w kneading compound for sealing. Recommended to use in conjunction with AK22. Supplied in 11 pcs of 205mm x 100mm. |  | AK22 Viscous Putty
AK22 is a tough, kneadable putty, strongly adhering on nearly every material. At very high accelerations (e.g. stroke or fast rotation) the AK22 may move its position because of its high mass. AK22 does not harden so there is no question of its hindering movement at the gauge area. An optimum protection can be reached by putting a layer of ABM75 on top of the AK22. | | Strain Gauges - Strain Gauges | |  | C Series Strain Gauges
The specialist for extreme temperatures. |  | G Series Strain Gauges
Optimum strain gauge for the manufacture of transducers. |  | K Series Strain Gauges
Foil strain gauges for ultra high quality transducers. Strain gauges for the manufacture of transducers, different creep adjustments available, also as "stick-on" version complete with touch-dry adhesive coating for optimum measurement results. |  | LE11 Encapsulated Strain Gauge
Encapsulated strain gauge with stranded wire - moisture proof and resistant against chemicals. |  | LI66 Fiber Composite Material Strain Gauges
LI66 strain gauges for integration in fiber composite materials. |  | LY11 Micro Strain Gauge
LY11-0.3/120 micro strain gauges: Certainty, even if every millimeter counts. Ever smaller, ever more performance: The trend toward miniaturization of components is an ongoing challenge. Where every millimeter counts, the new 1-LY11-0.3/120 micro strain gauge ensures significant reliability while requiring only a minimum of space. |  | Pre-Wired Strain Gauges
Strain gauges with connection cable and optional RJ11 plug. For experimental stress analysis, HBM has introduced a series of strain gauges with pigtails, based on the series that has proved its worth in stress analysis, the Y-series. The pre-wired strain gauges are provided with 50 mm-long teflon-insulated connection wires. These strain gauges are specifically customized with optional pigtail lengths (0.5 m to 10m) connected in 2, 3 or even 4-wire circuits. |  | RDS Crack Propogation Gauges
Crack propagation gauges - RDS20, RDS22, RDS40. Using crack propagation gauges, it is possible to determine the crack propagation on a component. |  | V Series Strain Gauges
Encapsulated strain gauges with 3m stranded connection wire. |  | Y Series Strain Gauges
General purpose gauges for most experimental stress analysis applications. | | Strain Gauges - Temperature Sensor | |  | TT-3-100 Temperature Sensor
The temperature sensor that is installed as easily as a strain gauge. TT-3/100 is a temperature sensor that can be used as easily and flexibly as a classical strain gauge. TT-3/100 is the ideal choice, if your measurement task involves measuring strain in particular - and, additionally - temperature values. |
 | HBM TEDS-Ready Amplifiers
Click for detailed list: QuantumX, MGCplus, CANHEAD, PME, digiCLIP |  | TEDS Dongle
The TEDSdongle is now available for writing and reading your own data to and from TEDS modules. The TEDSdongle is simply connected to a standard Windows PC via the USB connection. TEDS modules and sensors can be connected directly to the dongle. |  | TEDS Modules
The TEDS module can be incorporated into the housings, cables or connectors of different kinds of transducers. It contains an electronic data sheet which lets you set up the measuring amplifier automatically. |
| Torque Sensors - Non-Contacting / Torque Flanges | |  | CS-T-08 Flexplate Torque Transducer
Special Torque Transducer which replaces the original flexplate |  | T10F Torque Flange
The T10F torque flange is the first torque flange representative. The T10F uses shear stress as a measure of torque for the first time, a measurement principle for which HBM applied for patent. Available in ranges from 50 N·m up to 10 kN·m. |  | T10FH Torque Flange
The T10FH is a torque flange that can measure torques from 100 kN·m up to 300 kN·m – with the proven accuracy and reliability of the successful T10F product family. To achieve the goal of improved productivity and efficiency the T10FH is the ideal solution for power test benches for ship’s main engines or tests in the off-shore industry. |  | T10FM Torque Flange
The T10FM torque flange can measure torques up to 80 kN·m. It is based on a modified T10F measuring body and also uses the shear stress principle of measurement. The measuring body and the torque introduction part are made from one piece. Its extremely short design takes up less space in the test rig and thus saves money. The high permissible transverse forces allow projecting machine elements to be directly connected. |  | T10FS Torque Flange
The T10FS torque flange adds to the outstanding market reputation of the T10F torque flange, extending the range covered to greater accuracy, higher speeds and smaller outside diameters. It is based on a modified T10F measuring body and also uses the shear stress principle of measurement. Available in ranges from 100 N•m up to 10 kN•m. |  | T12 Digital Torque Flange
Uses modern fieldbus systems (CANopen, PROFIBUS DPV1) for connecting directly to PLC automation systems. Provides a frequency & analog output. Fit for use with conventional technologies. |  | T20WN Torque Transducer
The T20WN torque flange is specifically designed for measuring static and dynamic torque, rotation speed and angle of rotation in the laboratory, test and inspection sector, as well as in production monitoring and quality assurance. Avaiable in ranges from 0.1 N•m to 200 N•m. |  | T22 Torque Transducer
The T22 is an attractively priced transducer for simple torque applications. It comes with integrated electronics; this saves time and costs – no additional, external amplifiers are required for upgrading your measurement chain. Matched couplings are available for all T22 sizes. Its' compact design is perfectly suited for test benches where space is a constraint. |  | T40 Torque Flange
Saves space & costs due to its short design. Allows high parasitic loads enabling machine elements to be directly mounted. Has no slip rings or bearings. Available from 200 N·m to 10 kN·m. | | Torque Sensors - Slip-Ring | |  | T4A Torque Transducer
T4A and T4WA-S3 torque transducers are specifically designed for measuring static and dynamic torque, rotation speed and angle of rotation in production monitoring and quality assurance. Transducers can be used both in conjunction with hand-held screwdrivers and motorized screwdrivers, but not with impact screwdrivers. Available in ranges from 5 N•m up to 1 kN•m. |  | T5 Torque Transducer
The T5 torque transducer is designed for occasional, simple torque measurement tasks in the laboratory, teaching and testing sector. The cylindrical shaft ends allow torque to be applied without play. Slip-ring transfer allows all industry-standard amplifiers for SG full bridges to be used. Available in ranges from 10 N•m to 200 N•m. |
| Weighing - Digital Load Cells | |  | HBM Digital Load Cells
Digital load cells on the basis of the strain gage technology provide new impetus for the areas of dynamic weighing, sorting, filling, and dosing. | | Weighing - Electronics | |  | HBM Weighing Electronics
HBM supplies weighing electronics for all industrial platform scales, truck or container scales. In addition HBM offers electronic systems for process automation, e.g. for checkweigher and dosing process. | | Weighing - Load Cells | |  | HBM Weighing Load Cells
Industrial production and scales constructions, production of building materials, food and consumer goods industries, pharmacy, and medical engineering... In almost all sectors where goods are produced, processed or controlled, HBM weighing technology components can be found. For the majority of HBM load cells official approval certificates are available. Appropriate certificates are also available for their worldwide use. All our standard load cells are also available for the various zone areas in accordance with the valid ATEX directive. | | Weighing - Single Point | |  | HBM Single Point Load Cells
The term platform scale nowadays covers a wide field of application in the industrial weighing technology. It covers the design and configuration of equipment such as high-precision laboratory balances, shop-counter scales and personal weighing machines right through to post office weighers, medical scales etc. Platform scales are characterised by one or more load cells, usually arranged under a platform (scale pan) on which the goods intended for weighing are placed. | | Weighing - Weigh Modules | |  | HBM Weighing Modules
HBM offers solutions for weighing and level measurement in process industry applications and for in batching processes in the chemical, pharmaceutical, food and construction materials industry. In all these sectors our products are used continuously on a daily basis, in the harshest of environments. |
|
|
|
|
|
|
|