Durham Instruments

Temperature

*Temperature - Thermopiles*

	TCS208F Thermal Conductivity Sensor TCS208F is a thermal conductivity sensor for gases.
	TPT300V IR Pyrometer TPT 300 is a contactless temperature measuring system - called pyrometer - based on the detection of infrared radiation. This model is equipped with a lens and an infrared sensor (Thermopile) in front.
	TPTV Thermopile Module TPTV is a contact-less temperature measuring system based on the detection of infrared radiation. TPTV is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest. Provides the ambient and objects temperature via USB bus.
	TS105-1 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 1000±4 Ohms @ 0°C.
	TS105-10 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter and resistance 100 kOhm ±5% @ 25°C
	TS105-2 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 43±8 kOhm @ 25°C
	TS105-3 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 8-14µm wide band pass filter, and resistance 1000±4 Ohm @ 0°C
	TS105-4 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 8-14µm wide band pass filter, and resistance 43±8 kOhm @ 25°C.
	TS105-6 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Features 5µm long wave pass filter, and resistance 100 kOhm ±3% @ 25°C.
	TS105-8 Thermopile Sensor Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. The TS105-8 has a linear array with 8 pixels. Features silicon lens f=3.9mm, and resistance 5 to 40 kOhm @ 25°C.

Tilt Sensors & Inclinometers

	AAL2 Dual Axis Inclinometer The AAL2-Series conductive inclination sensor offers a full calibrated inclination sensor module on a PCB. The sensor provides voltage output depending on the inclination angle and related to the specific axis, as well as a voltage based temperature output signal. An optional integrated e2-prom contains data on the characteristic curve resp. calibration data. Available in various ranges up to ±30°
	D-series Dual Axis Inclinometer The D-Series is housed in a robust IP-67 rated aluminum can, and is designed to withstand the extreme shock and vibration normally associated with factory floor environments. Supplied in three factory calibrated ranges of ±5°, ±15° and ±30°. Output options include analog, digital or switching signals.
	DPL2 - DPN2 Dual Axis Inclinometer The DPL2/DPN2-Series Inclinometer offers a dual axis conductive inclinometer as a PCB level. This inclinometer provides the user modern microprocessor technology with an active linearization and temperature compensation. Available in various ranges up to ±30°
	NS-10E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±10° and a voltage output.
	NS-10G Inclinometer Switch This fully calibrated inclinometer offers a switch output signal. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in the range of ±10°.
	NS-15CAN Dual Axis Inclinometer The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. Available with digital output signals via CANopen, and a range of ±15°.
	NS-15DPG2-RXG Dual Axis Inclinometer The DPG Series dual axis conductive inclinometer in aluminum housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. Features a range of ±15°
	NS-15E Inclinometer The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±15°
	NS-15E Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±15° and a voltage output.
	NS-25DQG2-XUA Dual Axis Inclinometer A small inclinometer based on dual axis tilt sensor which works on the conductivity principle. Features a robust IP66 housing, voltage output and a range of ±25°.
	NS-25DQL2-IXA Dual Axis Inclinometer The NS-25/DQL2-IXA is a small board inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal via I2C. Features a range of ±25°
	NS-45E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±45° and a voltage output.
	NS-5E Inclinometer The E-Series consist of a single axis tilt sensor integrated with a thick film hybrid circuit for signal processing. Multiple connecting leads are available to support a variety of applications. Features a range of ±5°
	NS-5E2 Inclinometer This dual axis Inclinometer uses two single axis, tilt sensors. The sensor works on the conductivity principle. Features a range of ±5° and a voltage output.
	NS-P Inclinometer The P-series inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. They feature an aluminum baseplate and IP 65 housing, and are ideal for industrial, automotive and aerospace applications. Available in various ranges up to ±45°.
	NS-V Inclinometer The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing. Available with voltage or current output signal, and various ranges up to ±45°.