| Load Cells / Force Transducers - Axial Torsion |
 |
 | 1216 Axial Torsion Load Cell
The 1216 Axial-Torsion load cell measures both force and torsion in the same cell - with either channel capable of being used independently. Available in capacities from 250 lbf. to 2K lbf. |
 | 1516 Axial Torsion Load Cell
The 1516 is a low profile load cell designed for applications where axial and torsion loads need too be measured simultaneously. Available in capacity 100 lbf./50 lbf-in. |
 | 2816 Axial Torsion Load Cell
The 2816 Axial-Torsion load cell measures both force and torsion in the same cell - with either channel capable of being used independently. Similar to the 1216, but with a lower profile and capable of much higher forces and torques. Available in capacities of 3.3K lbf. to 15K lbf. |
| Load Cells / Force Transducers - Beam Type |
|
 | MB Miniature Beam Load Cell
The MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 5 lbf. to 250 lbf. |
 | MBI Fatigue Rated Mini Beam Overload Protected Load Cell
Similar to MBP mini beam but with better resistance to off center loads. Available in capacities from 2 lbf. to 10 lbf. |
 | MBP Miniature Beam Overload Protected Load Cell
The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10 lbf. |
 | SSB Sealed Beam Load Cell
The SSB is a sealed version of MB mini beam. Available in capacities from 50 lbf. to 1K lbf. |
| Load Cells / Force Transducers - Calibration Grade Low Profile Load Cells |
|
 | 1600 Gold Standard™ Calibration Load Cell
For calibrating other load cells where best possible load cell is required. 4% lower load limit per ASTM E74. Provides tension & compression in 1 unit with <0.005% nonrepeatability. |
 | 1601 Gold Standard™ Calibration Compression-Only Load Cell
The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides compression-only. |
 | 1606 Gold Standard™ Low Capacity Calibration Load Cell
The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity applications with capacities from 50 lbf. to 300 lbf. |
 | 1800 Platinum Standard™ Calibration Load Cell
The 1800 Platinum Standard is the ultimate in calibration grade load cells and has a 2% lower limit per ASTM E74 and an integral stud. |
| Load Cells / Force Transducers - Column / Rod End |
|
 | 2100 High Capacity Column Load Cell
The 2100 is a column load cell typically used in higher force applications. Available in capacities from 300K lbf. to 1000K lbf. |
 | 2120 Rod End
The 2120 rod end load cell is typically used with actuators where sensitivity to side loads is not important. |
 | 2200 Calibration Column Load Cell
Many customers perform 100 and 200K E4 calibrations of material test machines in the field. Interface has developed the relatively lightweight portable 2200 series column load cells to use for field testing applications. These are very accurate column cells and come with handles to facilitate transportation from the vehicle to the job site. They also come standard with 16 gages as well as E74 calibration. |
 | REC Rod End Load Cell
The REC is a rod end load cell typically used with actuators where sensitivity to side loads is not important. Available in capacities from 1K lbf. to 25K lbf. |
 | WMC Rod End Load Cell
The WMC rod end load cell is a tension & compression load cell with male threads on the top and bottom. Available in capacities from 20K lbf. to 50K lbf. |
| Load Cells / Force Transducers - Dual Range |
|
 | 2101 Dual Range Standard Compression-Only Load Cell
The 2101 consist of lower and higher capacity model 1200 type load cells which are stacked with overload protection built into the lower capacity load cell permitting high resolution to be obtained at both low and high levels of capacity. |
| Load Cells / Force Transducers - Load / Force Pins |
|
 | LP Loadpin Load Cell
The LP load pin is a custom product designed to replace pins or bolts that carry a load. Please consult us for a custom solution. |
| Load Cells / Force Transducers - Load / Force Washers |
|
 | LW Load Washer Load Cell
The LW is a load washer or through hole load cell typically used for measuring tension on fasteners. Available in capacities from 5 lbf. to 100K lbf. |
| Load Cells / Force Transducers - Load Buttons |
|
 | LBM Compression Load Button
The LBM is a compression only load button designed for relatively small spaces. Available in capacities from 25 lbf. to 50K lbf. |
 | LBS Miniature Compression Load Button
The LBS is a smaller less accurate version of the LBM. It is a compression only load button designed for very small spaces. Available in capacities from 5 lbf. to 1K lbf. |
 | MSC Small Diameter High Capacity Load Button
The MSC is a very small compression only high capacity load button. Available in capacities from 15K lbf. to 30K lbf. |
| Load Cells / Force Transducers - Low Capacity |
|
 | ULC Ultra Low Capacity Load Cell
The ULC is the world's most accurate ultra low capacity load cell measuring loads from 50 grams to 500 grams. |
| Load Cells / Force Transducers - Low Profile Load Cells |
|
 | 1000 Fatigue Rated High Capacity Load Cell
The 1000 series is a fatigue rated load cell with 300% overload protection, an extremely low moment sensitivity of .1%/in, low zero float(toggle) and a higher fatigue life than competitive Stainless Steel load cells. Available in capacities from 100K lbf. to 1000K lbf. |
 | 1000 Fatigue Rated Load Cell
The 1000 series is a fatigue rated load cell with 300% overload protection, an extremely low moment sensitivity of .1%/in, low zero float (toggle) and a higher fatigue life than competitive stainless steel load cells. Available in capacities from 250 lbf. to 50K lbf. |
 | 1100 Ultra Precision Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities from 300 lbf. to 200K lbf. |
 | 1101 Ultra Precision Compression-Only Load Cell
The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. Available in capacities of 1K lbf. to 50K lbf. |
 | 1200 Flange Load Cell
1200 Flange Load Cell-This is similar to 1200 but instead of having a center thread it has multiple smaller threads making installation easier for certain types of cylinders. Available in capacities from 30K lbf. to 330K lbf. |
 | 1200 Standard 3-Wire Amplified Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. With the electronics built into the load cell, there is no need for a separate signal conditioner. Available in capacities of 300 lbf. to 100K lbf. |
 | 1200 Standard High Capacity Load Cell
The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. Available in capacities from 200K lbf. to 2000K lbf. |
 | 1200 Standard Load Cell
Higher output than most competitive load cells. For static, general purpose applications requiring a load cell compensated for eccentric loads. Comes in capacities of 300 lbf. to 100K lbf. |
 | 1201 Standard Compression-Only Load Cell
The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. Available in capacities of 1K lbf. to 400K lbf. |
 | 1500 Standard Low Capacity Load Cell
The 1500 is a fatigued rated Low profile load cell is designed for low capacity applications where low sensitivity to eccentric load is important. Available in capacities from 50 lbf. to 300 lbf. |
 | 1700 Flange Load Cell
The 1700 Flange Load Cell has multiple smaller threads making installation easier for certain types of cylinders. Available in capacities from 550 lbf. to 11K lbf. |
 | 2400 Standard Stainless Steel Load Cell
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities from 100 lbf. to 5K lbf. |
 | 2400 Standard Stainless Steel Load Cell (10K lbf & 20K lbf)
The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 10K lbf. and 20K lbf. |
 | 2404 Standard Stainless Steel 2-Wire Amplified Load Cell
The 2404 is an amplified version of 2400 which gives mA output. It is still a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Available in capacities of 50 lbf. to 5K lbf. |
 | 2451-2461 Stainless Steel Compression-Only Load Cell
Interface has developed the new compact compression only 2451/2461 for applications requiring a very small footprint. The 2451 comes in 3 capacities, 50, 75, and 100K, each only 4.5” in diameter. The 2461 comes in 2 capacities, 150 and 200K, each only 5.5” in diameter. |
 | 3200 Standard Stainless Steel Load Cell
The 3200 has all the features of the Interface Model 1200 Low Profile only is stainless steel and hermetically sealed for harsh applications. Available in capacities from 2.5K lbf. to 100K lbf. |
 | 3420 & 3430 Coil Tubing Load Cells
The 3420 & 3430 load cells are designed for measuring tension and compression on coil tubing in the oil industry. Available in capacities from 20K lbf to 50K lbf. |
| Load Cells / Force Transducers - Miniature |
|
| LBM Compression Load Button
The LBM is a compression only load button designed for relatively small spaces. Available in capacities from 25 lbf. to 50K lbf. |
| LBS Miniature Compression Load Button
The LBS is a smaller less accurate version of the LBM. It is a compression only load button designed for very small spaces. Available in capacities from 5 lbf. to 1K lbf. |
| MB Miniature Beam Load Cell
The MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 5 lbf. to 250 lbf. |
| MBI Fatigue Rated Mini Beam Overload Protected Load Cell
Similar to MBP mini beam but with better resistance to off center loads. Available in capacities from 2 lbf. to 10 lbf. |
| MBP Miniature Beam Overload Protected Load Cell
The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10 lbf. |
| MSC Small Diameter High Capacity Load Button
The MSC is a very small compression only high capacity load button. Available in capacities from 15K lbf. to 30K lbf. |
 | SMA Minature S-Type Load Cell
The SMC is miniature version of SM where height is a constraint. Available in capacities from 15 lbf. to 200 lbf. |
 | SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |
 | WMC Miniature Sealed Stainless Steel Load Cell (1K-10K lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 1K lbf. to 10K lbf. |
 | WMC Miniature Sealed Stainless Steel Load Cell (5-500 lbf)
The WMC is Interface's smallest tension & compression load cell. Available in capacities from 5 lbf. to 500 lbf. |
| Load Cells / Force Transducers - Multi-Axis |
|
 | 5200 Multi-Axis Load Cell
The 5200 Low Profile load cell is designed for applications where it is required to measure moment loads as well as axial load to determine center of gravity or misalignment. Available in capacities from 1K lbf. to 50K lbf. |
| Load Cells / Force Transducers - S-Type |
|
 | SM S-Type Load Cell
The SM is a low cost highly accurate unsealed load cell for test machine and other general purpose applications. Available in capacities from 10 lbf. to 1K lbf. |
| SMA Minature S-Type Load Cell
The SMC is miniature version of SM where height is a constraint. Available in capacities from 15 lbf. to 200 lbf. |
| SML Low Height Load Cell
The SML is a low height load cell with high performance. Available in capacities from 5 lbf. to 1K lbf. |
 | SMT S-Type Overload Protected Load Cell
The SMT is ideal for low capacity applications where loads cells are often inadvertently overloaded. The SMT has internal mechanical stops permitting overloads up to 10 times rated capacity. Available in capacities from 1.1 lbf. to 450 lbf. |
 | SSM Sealed S-Type Load Cell
The SSM is a sealed version of SM. Available in capacities of 50 lbf. to 5K lbf. |
| Load Cells / Force Transducers - Single Point |
|
 | SPI Platform Scale Load Cell (25-150 lbf)
The SPI is designed to be used as a scale and is compensated for off center loads. Available in capacities from 25 lbf to 150 lbf. |
 | SPI Platform Scale Load Cell (3-15 lbf)
The SPI is designed to be used as a scale and is compensated for off center loads. Available in capacities from 3 lbf to 15 lbf. |