Durham Instruments

Display & Panel Meters

DML300 Single Channel LVDT Panel Indicator
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. DML300 series indicators have a five digit display, transducer excitation supply and many software features including max/min memory and math functions. All models are fitted with two analogue outputs - a high speed analogue output for monitoring fast changes of sensor movement, and a separate, electrically isolated, scaleable analogue output.

DMP200 Single Channel Digital Panel Indicator
The DMP200 can be used for both simple ´measurement only´ applications and in more demanding situations requiring digital communications, alarms, maths functions and complex signal conditioning. Ideally suited to operate with Penny & Giles linear and rotary potentiometers, providing a 10 Vdc or 0-12 Vdc transducer supply. This model is also suited to operate with thermocouples and RTDs, as well as pressure transducers, load cells and strain gauges.

Joysticks

	JC Handles: Ergonomic Handles for JC Joysticks The Penny & Giles JC300, JC400, JC150, JC600, JC2000 and JC6000 range of single and multi-axis joystick controllers have a number of ergonomic handle designed to suit different functions.
	JC025 Single Axis Fingertip Rocker The JC025 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile unit.
	JC030 Single Axis Fingertip Rocker The JC030 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile unit.
	JC100 Single Axis Fingertip Joystick Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystick that provides smooth, precise fingertip control in one axis.
	JC120 Single Axis Fingertip Joystick Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths.
	JC150 Rugged Single-Axis Joystick The JC150 was designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are important.
	JC1500 Rugged Single Axis Contactless Joystick The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms. Features analog or PWM output, with optional detents and center or friction lock options.
	JC200 Multi-Axis Inductive Joystick The JC200 has been designed for use with a separate valve driver card or machine control unit. Safety features include a lever mechanism that returns to the centre position when released and internal fault monitoring circuits. Typical applications include the control of wheelchairs, fork lift trucks and agricultural machinery.
	JC2000 Multi-Axis Contactless Joystick The JC2000 is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions.
	JC300 Multi-Axis Fingertip Joystick Designed for use with an electronic controller, the JC300 can be specified to generate up to five switched outputs per half axis, or analogue and switched reference signals. Available in single, dual, or three axis.
	JC3000 Single and Dual axis Fingertip Joystick For applications requiring a simplistic approach to fingertip control where strength and reliability are important. Comes in single or dual axis & various user defined features.
	JC400 Multi-Axis Fingertip Joystick Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip control with sequential detent feel.
	JC6000 Rugged Multi-Axis Joystick The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.

Linear Position Sensors

*Linear Position Sensors - Hall Effect*

	SLH100 Hall Effect Contactless Linear Sensor Designed to provide precision cost effective position sensing using the proven contactless Hall effect principle. The sensing system has two parts; sensor and magnetic activator.
	VPT210 Valve Position Transducer The VPT210 spool feedback sensor has been designed for the hydraulic spool valve market - particularly for new generation hydraulics fitted to on- and off-highway vehicles.
*Linear Position Sensors - In-Cylinder*

	ICS100 In-Cylinder Linear Potentiometer The ICS100 is designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurized environment. It can be supplied in lengths to suit actuator strokes up to 1100mm.
	ICT050 Contactless In-Cylinder Linear Transducer With a body diameter of only 5.4mm the ICT050 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT050 has a working life which is almost limitless.
	ICT080 Contactless In-Cylinder Linear Transducer With a body diameter of only 8mm the ICT080 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT080 has a working life which is almost limitless.
	ICT100 Contactless In-Cylinder Linear Transducer With a body diameter of only 10.1mm the ICT100 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT100 has a working life which is almost limitless.
*Linear Position Sensors - Inductive*

	SLT190 Contactless Linear Position Transducer Designed to provide reliable, fit-and-forget position sensing (up to 500mm) within a compact transducer size for the most arduous operating environments.
*Linear Position Sensors - LVDT*

	AF111 LVDT Displacement Transducer Suitable for clamp mounting, the AF111 has a threaded, unguided core assembly to simplify installation. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy.
	AF145 LVDT Displacement Transducer The AF145 features self-aligning rod end bearings for mounting. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy ratiometric operation.
*Linear Position Sensors - Potentiometers*

	HLP190 Spring Loaded Linear Potentiometer The HLP190 linear potentiometers has a body diameter of only 19mm with stroke lengths from 25mm to 150mm, and a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position.
	ICS100 In-Cylinder Linear Potentiometer The ICS100 is designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurized environment. It can be supplied in lengths to suit actuator strokes up to 1100mm.
	MLS130 Linear Potentiometer The MLS130 is a competitively priced linear position sensor for the motorsport industry. Available in eight stroke lengths from 25 to 200mm, the MLS130 is sealed to IP66, and is supplied with a DR25 sheathed, 3-core cable.
	SLS095 Linear Potentiometer The SLS095 comes in an extremely compact, lightweight package in stroke lengths from 10 to 100mm. The miniature size of this new sensor makes it ideal for applications in robotics, animatronics, medical equipment and motorsport data acquisition.
	SLS130 Linear Potentiometer The SLS130 comes in an extremely compact, lightweight package in stroke lengths from 25 to 200mm. It is ideally suited to high volume OEM manufacturers, where high performance and reliability has paramount importance.
	SLS190 Linear Potentiometer The SLS190 is available in stroke lengths from 25 to 350mm. Using the proven benefits of Hybrid Track Technology, the SLS190 is ideally suited to high volume OEM manufacturers.
	SLS220 Spring Loaded Linear Potentiometer The SLS220 is available in stroke lengths of 10 and 20mm, with a spring loaded operating shaft. This unit has a mounting flange to allow easy installation.
	SLS320 Linear Potentiometer The SLS320 is available in stroke lengths from 250 to 1600mm in a compact, with a lightweight, easy to use design. This unit is ideally suited to high volume OEM manufacturers.
*Linear Position Sensors - String (Draw Wire) Potentiometers*

	DLS Draw Wire Linear Sensor The DLS series of draw-wire linear position sensors are a cost effective way to measure linear displacements up to 5000mm in the most demanding industrial environments.

Rotary Position Sensors

*Rotary Position Sensors - Hall Effect*

	NRH280 Noncontact Rotary Hall Sensor Rotary position sensor that features a 2-piece unit - fully sealed sensor assembly and magnetized bolt. Single or dual outputs available.
	SRH220DR Contactless Rotary Sensor SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur. It is housed in an all-new moulded housing with separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected.
	SRH280P & SRH280DP Contactless Rotary Position Sensor For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68.
	SRH500P Contactless Rotary Sensor The SRH500P can meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, steelworks, marine equipment and power generating plants. This model has an option for environmental protection to IP69K.
	SRH880P Submersible Contactless Rotary Sensor The SRH880P has been specially developed to meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks and power generating plants.
	TPS280DP Throttle Position Sensor TPS280DP is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centers and is designed to interface with most common throttle body D type spindles. The sensor has a choice of 200 or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the FDR-25 sheathed spec 55A cable. With sealing to IP69K, it is also able to withstand high pressure wash-downs.
*Rotary Position Sensors - Potentiometers*

	SRS280 Sealed Rotary Potentiometer The SRS280 was developed to meet the harsh operating requirements of today´s automotive and motorsport markets. It uses hybrid potentiometer track technology, providing high stability under extremes of temperature and humidity
	SRS880 Submersible Rotary Potentiometer The SRS880 can meet the harsh operating requirements of applications such as construction, agricultural, military and utility vehicles, steelworks and power generating plants. This model can operate at a submerged depth of 2m (6.5 feet).

Signal Conditioning

	EICT Signal Conditioning Module The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user.
	SCM100 Signal Conditioner The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals.
	SSC Signal Conditioning Module The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors.
	UCM Universal Signal Conditioner The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation.

Technical Resources

*Technical Resources - Signal Conditioning Technical Data*

	EICT Setup Guide EICT Setup Guide
	UCM Manual UCM Manual

Tilt Sensors & Inclinometers

	STT280 Sealed Tilt Sensor The STT280 is provided in an extremely compact housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
	STT500 Sealed Tilt Sensor The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.