Durham Instruments

Belt Misalignment

	BA100-1 Conveyor Belt Alignment Switch Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
	BA100-1X Conveyor Belt Alignment Switch Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof enclosure.
	BA100-2 Conveyor Belt Alignment Switch Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
	BA100-2X Conveyor Belt Alignment Switch Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. It has (2) limit switches rated for 20A @ 120 VAC, 240 VAC, or 480 VAC, and is furnished with a heavy-duty explosionproof housing.
	Rub Block Door Assemblies Rub Block Door Assemblies are designed for quick and easy inspection of belts and replacement of worn rub blocks saving time and promoting regular maintenance inspections.

Control Potentiometers

	Accu-Dial Control Potentiometer The Accu-Dial is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).
	Accu-Tach Control Potentiometer The Accu-Tach is a compact, versatile, and precise micro-controller-based 10-turn potentiometer with an LCD set point display for accurate visual confirmation. The LCD display has a range of 0.000 to 9,999 and can be calibrated in user-units, including time in process (TIP).

Display & Panel Meters

	AC-D-4M Large Display Event Counter The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures.
	CT6000 Process Counter The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
*Display & Panel Meters - Motion & Motor Controllers*

	MicroLength 196 Closed Loop Position-Length Controller The MicroLength 196 is a closed-loop position/length controller used in cut-to-length and material feed applications. This unit typically interfaces with an AC or DC variable speed drive. Compared to traditional preset counter and PLC systems, the Microlength 196 offers increased accuracy and reduced cycle times.
	MicroSpeed 196 Controller The MicroSpeed 196 is a closed-loop velocity controller designed for use with AC and DC vairable speed drives of any horsepower. The Microspeed 196 can be used as a stand alone controller regulating a single motor to .01% , or as a follower in more complex multi-motor systems.
	MS320 Closed Loop Motor Speed Controller The MS320 is a cost-effective way to add digital PID velocity control to a master/follower variable speed drive system by monitoring a signal emanating from a feedback sensor "Digital or Analog" on a machine and fine-tuning the speed reference.
	MS332 Synchronous Controller A fully-digital, bi-directional event synchronizer with electronic gearing/lineshaft functions for use with AC and DC variable speed drives. For advanced motor control solutions requiring precise control of speed and angular position with no gain or loss of shaft revolutions.

Encoders

*Encoders - Optical Encoders*

	380 Quad Rotary Shaft Encoder Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals.
	380 Std Rotary Shaft Encoder Model 380 Std Encoder is a standard industrial grade encoder available with single channel output - 50% duty cycle square wave output signal in either direction of rotation.
	470 Heavy Duty Encoder Model 470 Encoder has a size 25 heavy-duty industrial housing with rugged sealed ball bearings and an anti-backlash flexible shaft coupling to isolate the internal high precision encoder from both axial and radial shaft loading. It supplies a quadrature output with an index pulse, and optional line driver output.

Hazard Monitoring Systems

	Electro-Sentry 1 Single Leg System The Electro-Sentry 1 is a single leg, stand-alone system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime.
	Electro-Sentry Multi-Leg System The Electro-Sentry is a multi-leg system commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment and bearing temperature as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage and process downtime.

Industrial Vibration Sensors

	VS-1 Vibration Monitor The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
	VS-1XP Vibration Monitor Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings.
	VS-2 Vibration Monitor Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the absence or presence of vibration caused by imbalance, misalignment, or excessive load.
	VS-2XP Vibration Monitor Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS2-XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
	VUM-800 Control Unit Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.
	VUM-800 Probe Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage.

Linear Position Sensor

*Linear Position Sensor - Slide Gate Position*

	SG1000B Linear Position Monitor Housed in a rugged NEMA 4 enclosure, the SG1000B is typically used to measure the linear position of a process that has a repetitive linear movement, providing independent and accurate feedback via a 4-20mA signal.

Rotary Position Sensors

*Rotary Position Sensors - Slide Gate Position*

	SG1000A Slide Gate Monitor Electro-Sensors SG1000A Slide Gate Monitor is a complete monitoring system housed in a compact and rugged explosionproof enclosure. It provides independent, accurate feedback of slide gate position to a controller (PLC) or Electro-Sensors’ optional remote slide gate display.
	SG1000C Rotary Position Monitor Housed in a compact and rugged explosionproof NEMA 4 enclosure, the SG1000C is an encoder-based position sensor providing a 4-20 mA output and is used to measure processes that have a repetitive single turn clockwise or counter clockwise rotary movement.
	SG1000D Valve-Damper Position Monitor Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. For processes having a full-scale sweep from 15 to 359 degrees.
	SG1000E Sub-Turn Shaft Monitor Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. For processes having a full-scale sweep from 5.6 to 130 degrees.

Signal Conditioning

*Signal Conditioning - Distributed IO*

	ION Modbus Nodes A single daisy-chain network that uses inexpensive cable and significantly reduces system cable lengths. Available in analog (12 inputs) or discrete (6 inputs, 6 output) versions and connects directly to PLC via Modbus RTU.

Speed Measurement

	Electro-Sensors catalog 2012 Catalog from Electro-Sensors
*Speed Measurement - Counters*

	AC-D-4M Large Display Event Counter The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet away. The counter can receive pulse inputs from Hall-Effect sensors, Photo-Electric sensors, proximity sensors, encoders, or contact closures.
	CT6000 Process Counter The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. This counter also features programmable relay outputs and 4-20 mA output options that allow it to become a Full-Process Control Counter for almost any application.
*Speed Measurement - Data Acquisition & Networked I/O*

	ION Modbus Nodes A single daisy-chain network that uses inexpensive cable and significantly reduces system cable lengths. Available in analog (12 inputs) or discrete (6 inputs, 6 output) versions and connects directly to PLC via Modbus RTU.
	SpeedTalker-DN (UI) DeviceNet Shaft Speed Monitor Electro-Sensors' SpeedTalker-DN (UI) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet.
*Speed Measurement - E-Z Mount Brackets & Disc Guards*

	EZ-100 Easy Mount Bracket Assembly The EZ-100 allows a Speed Switch or Speed Sensor to be mounted to a rotating shaft without the need of any additional brackets or hardware.
	EZ-SCP Easy Mount Bracket Assembly The EZ-SCP allows an SCP-Series Switch to be mounted to the end of a shaft without the need for any additional brackets or hardware.
	Stainless Steel Disc Guards Stainless Steel Disc Guards protect your critical disc and sensor or switch from from impact or shock damage. Disc-Guards also help minimize the effects of dust, dirt, grease, and grime.
*Speed Measurement - Encoders*

	380 Quad Rotary Shaft Encoder Model 380 Quad Encoder is a standard industrial grade encoder available quadrature output. Quadrature (bi-directional) models have a second LED and sensor positioned 90-degrees apart to produce two square wave signals.
	380 Std Rotary Shaft Encoder Model 380 Std Encoder is a standard industrial grade encoder available with single channel output - 50% duty cycle square wave output signal in either direction of rotation.
	470 Heavy Duty Encoder Model 470 Encoder has a size 25 heavy-duty industrial housing with rugged sealed ball bearings and an anti-backlash flexible shaft coupling to isolate the internal high precision encoder from both axial and radial shaft loading. It supplies a quadrature output with an index pulse, and optional line driver output.
	Traction Wheel Assembly The traction wheel rides directly on the material being monitored. The wheel is connected to a rotary shaft encoder, which is supported by the mounting bracket. The encoder then generates a digital pulse frequency based on the number of pulses per revolution and the speed of the traction wheel.
*Speed Measurement - Pulser Discs & Magnet Wheels*

	198EM Magnet Wheel The 60 Pole Pair Magnet Wheel is an end mount, ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel.
	199SM Magnet Wheel The 60 Pole Pair Magnet Wheel is a shaft mount, ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel.
	232 Pulser Disc Model 232 is a 4" PVC disc with 32 face-mounted magnets. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	255 Pulser Disc Model 255 is a 4" Nylon Pulser Disc with 16 face mounted magnets. The 255 Pulser Disc is the standard disc for most Electro-Sensors systems. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	256 Pulser Disc Model 256 is a 2.5" PVC disc with 8 face-mounted magnets. The 256 is standard with M5000 speed switch systems. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	257 Pulser Disc Model 257 is an 8" PVC disc with 32 face-mounted magnets. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	PD225 Pulser Disc PD225 PVC Pulser Discs are 2.75" diameter discs with 20 face-mounted magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall-Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	PD455 Pulser Disc PD455 PVC Pulser Discs are 4.75" in diameter and have 20 face-mount magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	PD725 Pulser Disc PD725 Aluminum Pulser Discs are 7.5" in diameter and have 60 face-mount magnets. They are constructed of aluminum and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
	PDE450 Pulser Disc PDE450 PVC Pulser Discs are 4" in diameter and have 20 edge-mount magnets. They are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive Sensors. The end of the shaft to be monitored is center drilled and tapped and the discs are mounted on the end of the shaft.
*Speed Measurement - Pulser Wraps*

	High Speed Pulser Wraps High Speed Pulser Wraps are aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 2".
	Miniature Pulser Wraps Miniature Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.25" wide and have a minimum outside diameter of 4".
	Narrow Pulser Wraps Narrow Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. Narrow Wraps are 0.625" wide and have a minimum outside diameter of 7".
	Slotted Pulser Wraps Slotted Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 7".
	Standard Pulser Wraps Standard Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic fields. They are 1.5" wide and have a minimum outside diameter of 4".
*Speed Measurement - Reverse Rotation Detectors*

	TR400 Speed & Direction Indicator The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and accurately. The ability to accurately detect and convert 0.01 to 10,000 Hz signal input makes the TR400 an inexpensive solution to many industrial applications. With the addition of optional relay outputs and/or 4-20 mA analog output, the TR400 becomes a complete process control and display system.
	UDS1000 Reverse Rotation Detector The UDS1000 Reverse Rotation Detector is a complete system, designed to detect shaft reversal. Standard system includes UDS1000, 906B Sensor and 255 Pulser Disc.
*Speed Measurement - Ring Kits*

	DRK 143TC Digital Ring Kits DRK 143TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 143TC, 145TC, 182C & 184C; 7/8" Bore. Standard DRK 143TC Ring Kit Comprises: 143TC Aluminum Ring, 7/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR).
	DRK 182TC Digital Ring Kits Electro-Sensors DRK 182TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 182TC, 184TC, 213C, 215C & 254C; 1-1/8" Bore. Standard DRK 182TC Ring Kit Comprises: 182TC Aluminum Ring, 1-1/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR).
	DRK 213TC Digital Ring Kits Electro-Sensors DRK 213TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 213TC, 215TC, 254UC & 256UC; 1-3/8" Bore. Standard DRK 213TC Ring Kit Comprises: 213TC Aluminum Ring, 1-3/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR).
	DRK 254TC Digital Ring Kits Electro-Sensors DRK 254TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 254TC & 256TC; 1-5/8" Bore. Standard DRK 254TC Ring Kit Comprises: 254TC Aluminum Ring, 1-5/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR).
	DRK 56C Digital Ring Kits Electro-Sensors DRK 56C Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They fit NEMA Motor Frame 56C: 5/8" Bore. Standard DRK 56C Ring Kit Comprises: 56C Aluminum Ring, 5/8" Magnet Wheel, 1101 Hall Effect Sensor (60PPR).
	QDRK 143TC Quadrature Ring Kit The QDRK 143TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 143TC, 145TC, 182C & 184C; 7/8" Bore. Standard QDRK 143TC Ring Kit Comprises: 143TC Aluminum Ring, 7/8" Magnet Wheel, 1201 Quadrature Hall Effect Sensor (60PPR).
	QDRK 182TC Quadrature Ring Kit The QDRK 182TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. They fit NEMA Motor Frame: 182TC, 184TC, 213C, 215C & 254C; 1-1/8" Bore. Standard QDRK 182TC Ring Kit Comprises: 182TC Aluminum Ring, 1-1/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR).
	QDRK 213TC Quadrature Ring Kit The QDRK 213TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 213TC, 215TC, 254UC & 256UC; 1-3/8" Bore. Standard QDRK 213TC Ring Kit Comprises: 213TC Aluminum Ring, 1-3/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR).
	QDRK 254TC Quadrature Ring Kit The QDRK 254TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 254TC & 256TC; 1-5/8" Bore. Standard QDRK 254TC Ring Kit Comprises: 254TC Aluminum Ring, 1-5/8" Magnet Wheel, 1202 Quadrature Hall Effect Sensor (60PPR).
	QDRK 56C Quadrature Ring Kit The QDRK 56C Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. It fits NEMA Motor Frame: 56C; 5/8" Bore. Standard QDRK 56C Ring Kit Comprises: 56C Aluminum Ring, 5/8" Magnet Wheel, 1201 Quadrature Hall Effect Sensor (60PPR).
*Speed Measurement - Sensors - Analog*

	916A Analog Sensor Electro-Sensors 916A passive analog sensors are designed for use with pulse generators that provide magnetic targets, such as Electro-Sensors Pulser Discs and Split Collar Pulser Wraps. 916A sensors have a 3/4" threaded aluminum body, are supplied with a mounting bracket and jam nuts, and are recommended for use with Pulser Discs and Split Collar Pulser Wraps.
	917A XP Analog Sensor 917A explosionproof sensors are mounted in a rugged cast aluminum enclosure, which is CSA approved and UL rated for Class I, Group D; Class II, Groups E, F, and G, and Class III environments. 917A XP sensors are also supplied with a mounting bracket and are recommended for use with Pulser Discs and Split Collar Pulser Wraps.
*Speed Measurement - Sensors - Hall Effect*

	1101 Hall Effect Sensors 1101 stainless steel Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as 60 Pole Pair Magnet Wheels, Pulser Wraps, or Pulser Discs. It is the recommended Hall-effect sensor for use with Electro-Sensors NEMA C Flange Ring Kits.
	1102 Magnetoresistive Sensor Electro-Sensors 1102 magneto resistive sensors are used with magnetic targets such as 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is 7/16 inch in diameter, non-threaded stainless steel, and is 2 inches in length. It is the recommended Magneto Resistive Sensor for use with Electro-Sensors NEMA C Flange Ring Kits.
	906 Hall Effect Sensor The 906 standard Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. The 906 Hall-effect Sensor is the standard sensor for most Electro-Sensors systems.
	906B (Bi-Directional) Hall Effect Sensor The 906B is a quadrature Hall-effect sensor is designed for applications requiring both speed and direction information. It produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It is water-proof and suitable for most applications, including environments where dirt, dust, grease, or moisture are present.
	907 XP (explosion-proof) Hall-effect Sensor The 907 XP (explosion-proof) Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It is the standard EXPLOSION PROOF sensor for most Electro-Sensors systems. It has a 1-inch NPT conduit opening, and is provided with a mounting bracket.
	907B XP (Bi-Directional) Hall Effect Sensor The 907B XP Hall-effect quadrature sensor is designed for applications requiring both speed and direction information. Available in either the 907BV or 907BH configuration, it produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse generator. It has an XLB-3 enclosure which is C.S.A. approved and UL rated for Class I Group D; Class II Group E, F, G; Class III. It has a 1-inch NPT conduit opening, and is provided with a mounting bracket.
	931 XP Miniature Hall Effect Sensor Electro-Sensors 931 XP (explosion-proof) Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs. It is mounted in a cast aluminum enclosure which is C.S.A. approved and UL rated for Class I Groups C, D; Class II Groups E, F, and G; Class III environments. The conduit opening is 1/2 inch NPT.
	932 Magnetoresistive Sensor Electro-Sensors 932 Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is 3/4 inch in diameter, with 3/4-16 UNF threads, and is 2-1/2 inches in length. It is also used in applications where only one magnet is present for counting, function start/stop, or orientation alignment of mechanical or electronic indexing equipment.
	933 XP Magnetoresistive Sensor Electro-Sensors 933 XP (explosion proof) Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output signals. It is mounted in a cast aluminum enclosure which is C.S.A. approved and UL rated for Class I Groups C, D; Class II Groups E,F, G; Class III environments. The conduit opening is 1/2 inch NPT.
	HE950 Proximity Sensor HE950 sensors monitor gear-teeth, spokes, or keyways and produce a digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners, or as a direct pulse input into PLCs. The HE950 sensor is a “one size fits all” sensor capable of operating across broad range of target sizes and offering flexible gap distance set up (up to 3mm).
	Series 18 Shaft Speed Sensors Series 18 sensors are compatible with PLC inputs, tachometers and a wide range of frequency meters. All models come standard with a mounting bracket and two stainless steel hex jam nuts.
*Speed Measurement - Sensors - Proximity*

	608 Proximity Sensor Electro-Sensors Model 608 is an 8mm unshielded proximity sensor. It has a maximum sensing range of 0.080" and maximum switching frequency of 800 Hz.
	608-1 Proximity Sensor Electro-Sensors Model 608-1 is an 8mm shielded proximity sensor. It has a maximum sensing range of 0.060" and maximum switching frequency of 2 kHz.
	612 Proximity Sensor Electro-Sensors Model 612 is a 12mm unshielded proximity sensor. It has a maximum sensing range of 0.200" and maximum switching frequency of 400 Hz.
	612-1 Proximity Sensor Electro-Sensors Model 612-1 is an 12mm shielded proximity sensor. It has a maximum sensing range of 0.080" and maximum switching frequency of 1.5 kHz.
	618 Proximity Sensor Electro-Sensors Model 618 is an 18mm unshielded proximity sensor. It has a maximum sensing range of 0.390" and maximum switching frequency of 200 Hz.
	618-1 Proximity Sensor Electro-Sensors Model 618-1 is an 18mm shielded proximity sensor. It has a maximum sensing range of 0.200" and maximum switching frequency of 600 Hz.
	630 Proximity Sensor Electro-Sensors Model 630 is a 30mm unshielded proximity sensor. It has a maximum sensing range of 0.710" and maximum switching frequency of 100 Hz.
	630-1 Proximity Sensor Electro-Sensors Model 630-1 is a 30mm shielded proximity sensor. It has a maximum sensing range of 0.390" and maximum switching frequency of 400 Hz.
*Speed Measurement - Shaft Speed Switches*

	ASiSA AS-Interface Speed Alarm Electro-Sensors’ ASiSA is an AS-Interface speed sensor with underspeed alarm designed to operate in demanding, hazardous and industrial environments. The ASiSA continuously monitors rotating shaft speed, comparing it to a trip-point setting and alarming when less than the trip-point.
	DR1000 Digital Speed Switch The DR1000 features precise set point capability over a broad range of speeds starting at 0.5 rpm, making it ideal for super slow speed applications. The DR1000 monitors shaft speeds, detecting shaft slowdown to within 1% of the set point. A DPDT control relay rated at 5A at 30 Vdc/l20Vac resistive, serves as the output.
	FB420 Shaft Speed Sensor Electro-Sensor’s FB420 is an integral part of the Electro-Sentry™ Hazard Monitoring System but is also available as a stand alone shaft speed sensor. It provides a 4-20mA signal directly proportional to the rotational speed of a monitored shaft and has a 4 digit LCD display capable of displaying from 0.000 to 9999. RPM or from 04.00 to 20.00 mA.
	LRB-1000 Speed Switch LRB-1000 Speed Switches are complete systems with one individually adjustable set point for monitoring a single rotating shaft. The LRB-Series System is an efficient way to continuously track proper machine RPM, and provide a relay protection upon detection of an unwanted change in speed or stoppage of the monitored shaft.
	LRB-2000 Speed Switch LRB-2000 Speed Switches are complete systems with two individually adjustable set points for monitoring a single rotating shaft. The LRB-Series System is an efficient way to continuously track proper machine RPM, and provide a relay protection upon detection of an unwanted change in speed or stoppage of the monitored shaft.
	M100 & M5000 Miniature Speed Switches M-Series Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. The M100 has a relay setpoint range of between 10RPM and 100RPM. The M5000 has a relay setpoint range of between 100RPM and 5000RPM. This range is where the relay can be set to trip - both switches have the same operating range.
	M100T & M5000T Miniature Speed Switches The M100T and M5000T Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. These switches have a terminal block inside the housing for easy wiring connection and installation. The M100T has a relay setpoint range of between 5RPM and 100RPM. The M5000T has a relay setpoint range of between 100RPM and 5000RPM.
	PVC100 & PVC5000 Miniature Speed Switches The PVC-Series of corrosion-resistant speed switches are self-contained rotation monitoring systems that are ideal for detecting the unwanted slow down or stoppage of process equipment. The PVC-Series of switches are ideal for use in fertilizer, salt, and chemical processing plants - or anywhere that there is a corrosive environment.
	SCP1000 Presettable Speed Switch SCP1000 Presettable Machine Speed Switches are complete systems providing one individually adjustable relay set point, while monitoring a single rotating shaft. Also features visual set point adjustment for dial in ease and accuracy of set point settings. SCP-Series Switches can be completely adjusted with the machinery at rest, there is no need to run the shaft.
	SCP2000 Presettable Speed Switch SCP2000 Presettable Machine Speed Switches are complete systems providing two individually adjustable relay set points, while monitoring a single rotating shaft. SCP-Series Switches can be completely adjusted with the machinery at rest, there is no need to run the shaft.
	SpeedTalker DN-BH Devicenet Shaft Speed Sensor Electro-Sensors SpeedTalker DN-BH is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, stainless steel enclosure, the SpeedTalker DN-BH is designed to operate in demanding industrial environments. It features a round M12 micro connector, and operates in any DeviceNet network.
	SpeedTalker DN-XP Devicenet Shaft Speed Sensor Electro-Sensors SpeedTalker DN-XP is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, explosion-proof enclosure, the SpeedTalker DN-XP is designed to operate in demanding, hazardous and industrial environments. It features an open style connector, and operates in any DeviceNet network.
	SS110 Slow Speed Switch The SS-110 Slow Speed Switch is a complete system that has one adjustable set point for monitoring a single rotating shaft. It is an efficient way to continuously track proper machine RPM, and provide a relay output upon detection of an unwanted change in speed or stoppage of the monitored shaft.
	ST420 Shaft Tachometer Sensor The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency (rotating shaft speed).
*Speed Measurement - Speed to Analog Signal Conditioners*

	AIFO-200 Analog to Frequency Conversion Module The AIFO-200 is an interface device used between an analog signal and a frequency-input device typically used in applications where a process is monitored by a transducer, PLC, PC, or some other device that provides a 0–10 Vdc or 4–20 mA signal.
	SA420 Digital Signal Conditioner The Electro-Sensors SA420 Signal Conditioner is a complete system which provides an analog signal directly proportional to the speed of a monitored shaft.
	ST420 Shaft Tachometer Sensor The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency (rotating shaft speed).
*Speed Measurement - Tachometers*

	AP1000 Digital Tachometer The AP1000 Series Digital Tachometer is a complete rate monitoring system that combines accuracy and reliability in a rugged, compact housing. The AP1000 can take a variety of pulse inputs. The meter translates the input pulses to display RPM, or any specified user unit such as Feet Per Minute, Parts Per Hour, or Gallons Per Minute.
	H100T Analog Tachometer The H100T Series Analog Tachometer is a complete system capable of providing the user with a linear, visual indication of rates as low as 25 rpm full scale. The H100T utilizes the latest in solid state circuitry, has three switch selectable speed ranges, 0-50 rpm, 0-500 rpm, and 0-5000 rpm, and an accuracy of +/- 2%.
	HH100 Hand-Held Digital Tachometer The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and length. The HH100's rugged construction, portability and outstanding features make it an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.
	TR400 Speed & Direction Indicator The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and accurately. The ability to accurately detect and convert 0.01 to 10,000 Hz signal input makes the TR400 an inexpensive solution to many industrial applications. With the addition of optional relay outputs and/or 4-20 mA analog output, the TR400 becomes a complete process control and display system.
	TR5000 Ratemeter Tachometer The TR5000 is a Full Logic Control Process Ratemeter that can display up to three separate values of rate (from up to 2 different shafts) and compare them to programmable set points.

Technical Resources

*Technical Resources - Speed Measurement Technical Data*

	LRB-series Manual LRB-series Manual
	M100-M5000 Installation Instructions M100-M5000 Installation Instructions
	SA420 Manual SA420 Manual
	SCP-series Manual SCP-series Manual
	ST420 Manual ST420 Manual

Temperature

*Temperature - Temperature Transmitters*

	TT-420 Temperature Sensors TT420 temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs.
	TT-420-LT Temperature Sensors TT420-LT temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog inputs

Tilt Sensors & Inclinometers

*Tilt Sensors & Inclinometers - Industrial Tilt Swtches*

	MTS-20H Standard Probe With Hanger Electro-Sensors MTS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. It is a standard-duty steel probe with a steel hanger and 8 feet of cable attached
	MTS-30H Heavy-Duty Probe With Hanger Electro-Sensors MTS-30H heavy-duty probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. The MTS-30H is a heavy-duty steel probe with hanger and 8 feet of cable attached.
	MTSS-20H Standard Stainless Steel Probe With Hanger Electro-Sensors MTSS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. It is a standard-duty stainless steel probe with hanger and 8 feet of cable attached.
	MTSS-30H Heavy-Duty Stainless Steel Probe With Hanger Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. It is a heavy-duty stainless steel probe with hanger and 8 feet of cable attached.
	SCU-200 Tilt Switch Control Unit Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection of transfer chute plug-up, control of material depth in crusher bowls, and the sensing of alarm conditions in rock box, screen classifier, etc.