 | 101 DC Signal Conditioner
A 3-Channel DC Signal Conditioner Amplifier designed to be used with bridge type or differential output accelerometers and pressure transducers. With variable gain adjustment, shunt calibration capability, multiple excitation level settings, and a variety of optional filter modules. |
|
 | 140 Inline Amplifier
The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140 offers a unique auto-zero function. |
|
 | 500 In-Line Signal Conditioner
Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth. |
|
 | ATA-2001 Amplifier
The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. All amplifier controls are accessible from the outside of the rugged aluminum enclosure. Designed for universal compatibility with all 4, 5, and 6 lead LVDTs. A wide range of oscillator frequencies combined with two excitation voltages, 3.5 and 0.5 Vrms, provide maximum versatility. |
|
 | BSC4 4-Channel Bridge Amplifier
Four channel bridge amplifier with voltage and current or USB output. |
|
 | CSC Inline Signal Conditioner
Designed to be built into the load cell cable. Available with a range of voltage or current outputs. |
|
 | DCA Signal Conditioner
10-28V supply and user selectable +/-10V, +/-5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. Features 100Hz bandwidth. |
|
 | DF30CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. |
|
 | DF30DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. |
|
 | DF30DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. |
|
 | DF31CAN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |
|
 | DF31DN digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |
|
 | DF31DP digiCLIP Digital Amplifier
digiCLIP is the modern modular amplifier system for industrial environments. The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital outputs. |
|
 | digiCLIP Digital Amplifier (overview)
digiCLIP is the modern modular amplifier system for industrial environments. It facilitates faster and more reliable measurement, and it’s easily installed. digiCLIP also recognizes transducers equipped with TEDS memory chips. CANbus and PROFIBUS interfaces available. |
|
 | DMA Signal Conditioner
Din rail mountable with user selectable outputs of +/-10V, +/-5V or 4-20 mA. 10-28VDC powered suitable for battery or automotive use. Features 1000 Hz bandwidth and push-button shunt calibration. |
|
 | EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position transducers. The module operates from a 10-60 Vdc supply voltage and provides a range of outputs which can be configured by the user. |
|
 | IAM Amplifier
The compact IAM In-line Amplifiers provide a fixed 1, 10, 20, 50, 100, 200, 500 or 1000 100kHz – 3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection. |
|
 | IAMR Amplifier
The compact IAMR In-line Amplifiers provide a fixed 10, 20, 50, 100, 200 or 500 Gain with 700kHz/G-3dB bandwidth. Each unit features 0.1% non-linearity error and reverse polarity and short circuit protection. |
|
 | IEM-422 Current Transmitter
The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply. |
|
 | INF-USB Universal Serial Bus Output Module
The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. Included graphing and logging software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for later research. |
|
 | LDM-1000 Signal Conditioner
The LDM-1000 features several different input / output options to accommodate varying PLC analog I/O requirements. A wide range combination of gains, drive voltages and oscillator frequencies insure compatibility with virtually all LVDT and RVDT type sensors. |
|
 | LiM-4-20 Transmitter Module
The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. 4 to 20 mA output may be achieved with LVDT full scale outputs from 100 mV to 5.6 Volts rms. |
|
 | LVM-110 Voltage Module
The LVM-110 is designed to be a low cost LVDT signal conditioning solution for OEM applications, and is compatible with most standard and special design Measurement Specialties LVDTs. Provides analog voltage output. |
|
 | MP01 Multi Channel PME Amplifier
Multi-channel amplifier for applications in process supervision and industrial test-rig measurement technology. |
|
 | MP55 Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers. |
|
 | MP55DP Single Channel PME Amplifier
4.8kHz carrier frequency for S.G., inductive, LVDT, piezo-resistive, and potentiometric transducers with DP interface. |
|
 | MP60 Single Channel PME Amplifier
Single channel module for incremental transducers. |
|
 | MP60DP Single Channel PME Amplifier
Single channel module for incremental transducers with Profibus DP interface. |
|
 | MP85A FASTpress Industrial Amplifier
Maximize the quality of fitting processes such as riveting, punching or press-fitting. MP85A FASTpress monitors your production processes in real time, directly during ongoing operation. Your benefit: A consistently high quality of your products – because MP85A FASTpress identifies problems immediately as they occur. |
|
 | PME Industrial Amplifiers
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories. |
|
 | PMX Modular Amplifier System
Precise acquisition of measurement signals at 19,200 samples per second. With 16 measuring channels and 32 calculating channels per module, and scaleable with additional modules. Uses real-time communication via Industrial Ethernet and a modern browser based user-software. |
|
 | SCM100 Signal Conditioner
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. Capable of providing a range of voltage or current output signals. |
|
 | SGA Signal Conditioner
User selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz & sealed ABS enclosure. Supports shunt calibration & a wide range of gain settings. |
|
 | SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensors. |
|
 | UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple unit synchronisation. |
|